DragonOS/kernel/driver/timers/HPET/HPET.c

#include "HPET.h"
#include <common/kprint.h>
#include <mm/mm.h>
#include <driver/interrupt/apic/apic.h>
#include <exception/softirq.h>
#include <driver/timers/timer.h>
#include <process/process.h>
#include <sched/sched.h>

static struct acpi_HPET_description_table_t *hpet_table;
static uint64_t HPET_REG_BASE = 0;
static uint32_t HPET_COUNTER_CLK_PERIOD = 0; // 主计数器时间精度（单位：飞秒）
static double HPET_freq = 0;                 // 主计时器频率
static uint8_t HPET_NUM_TIM_CAP = 0;         // 定时器数量

extern struct rtc_time_t rtc_now; // 导出全局墙上时钟

enum
{
    GCAP_ID = 0x00,
    GEN_CONF = 0x10,
    GINTR_STA = 0x20,
    MAIN_CNT = 0xf0,
    TIM0_CONF = 0x100,
    TIM0_COMP = 0x108,
    TIM1_CONF = 0x120,
    TIM1_COMP = 0x128,
    TIM2_CONF = 0x140,
    TIM2_COMP = 0x148,
    TIM3_CONF = 0x160,
    TIM3_COMP = 0x168,
    TIM4_CONF = 0x180,
    TIM4_COMP = 0x188,
    TIM5_CONF = 0x1a0,
    TIM5_COMP = 0x1a8,
    TIM6_CONF = 0x1c0,
    TIM6_COMP = 0x1c8,
    TIM7_CONF = 0x1e0,
    TIM7_COMP = 0x1e8,
};

hardware_intr_controller HPET_intr_controller =
    {
        .enable = apic_ioapic_enable,
        .disable = apic_ioapic_disable,
        .install = apic_ioapic_install,
        .uninstall = apic_ioapic_uninstall,
        .ack = apic_ioapic_edge_ack,
};

void HPET_handler(uint64_t number, uint64_t param, struct pt_regs *regs)
{
    switch (param)
    {
    case 0: // 定时器0中断
        ++timer_jiffies;
        // 若当前时间比定时任务的时间间隔大，则进入中断下半部
        if (container_of(list_next(&timer_func_head.list), struct timer_func_list_t, list)->expire_jiffies <= timer_jiffies)
            set_softirq_status(TIMER_SIRQ);
/*
        switch (current_pcb->priority)
        {
        case 0:
        case 1:
            --sched_cfs_ready_queue.cpu_exec_proc_jiffies;
            ++current_pcb->virtual_runtime;
            break;
        case 2:
        default:
            sched_cfs_ready_queue.cpu_exec_proc_jiffies -= 2;
            current_pcb->virtual_runtime += 2;
            break;
        }

        if (sched_cfs_ready_queue.cpu_exec_proc_jiffies <= 0)
            current_pcb->flags |= PROC_NEED_SCHED;
*/
        break;

    default:
        kwarn("Unsupported HPET irq: %d.", number);
        break;
    }
}

int HPET_init()
{
    // 从acpi获取hpet结构体
    ul hpet_table_addr = 0;
    acpi_iter_SDT(acpi_get_HPET, &hpet_table_addr);
    if (hpet_table_addr == 0)
    {
        kerror("HPET Not Found On This Computer!");
        return E_HPET_INIT_FAILED;
    }
    hpet_table = (struct acpi_HPET_description_table_t *)hpet_table_addr;
    // 由于这段内存与io/apic的映射在同一物理页内，因此不需要重复映射
    HPET_REG_BASE = SPECIAL_MEMOEY_MAPPING_VIRT_ADDR_BASE + hpet_table->address;
    // 读取计时精度并计算频率
    uint64_t tmp;
    tmp = *(uint64_t *)(HPET_REG_BASE + GCAP_ID);
    HPET_COUNTER_CLK_PERIOD = (tmp >> 32) & 0xffffffff;
    HPET_freq = 1.0 * 1e15 / HPET_COUNTER_CLK_PERIOD;
    HPET_NUM_TIM_CAP = (tmp >> 8) & 0x1f; // 读取计时器数量
    double x = 1*2;
    x = 1.0*3.65;
    //kinfo("HPET CLK_PERIOD=%#03lx Frequency=%f", HPET_COUNTER_CLK_PERIOD, (double)HPET_freq);
    
    struct apic_IO_APIC_RTE_entry entry;
    // 使用I/O APIC 的IRQ2接收hpet定时器0的中断
    apic_make_rte_entry(&entry, 34, IO_APIC_FIXED, DEST_PHYSICAL, IDLE, POLARITY_HIGH, IRR_RESET, EDGE_TRIGGER, MASKED, 0);
    // 注册中断
    irq_register(34, &entry, &HPET_handler, 0, &HPET_intr_controller, "HPET0");

    *(uint64_t *)(HPET_REG_BASE + GEN_CONF) = 3; // 置位旧设备中断路由兼容标志位、定时器组使能标志位
    io_mfence();

    *(uint64_t *)(HPET_REG_BASE + TIM0_CONF) = 0x004c; // 设置定时器0为周期定时，边沿触发，投递到IO APIC的2号引脚（这里有点绕，写的是8259的引脚号，但是因为禁用了8259，因此会被路由到IO APIC的2号引脚）
    io_mfence();
    *(uint64_t *)(HPET_REG_BASE + TIM0_COMP) = HPET_freq; // 1s触发一次中断
    io_mfence();

    rtc_get_cmos_time(&rtc_now);
    *(uint64_t *)(HPET_REG_BASE + MAIN_CNT) = 0;
    io_mfence();
}