소스 검색

version T

noxorc 12 년 전
부모
커밋
acea2e9ad8
2개의 변경된 파일260개의 추가작업 그리고 0개의 파일을 삭제
  1. 114 0
      gnu-efi-3.0/apps/modelist.c
  2. 146 0
      gnu-efi-3.0/apps/route80h.c

+ 114 - 0
gnu-efi-3.0/apps/modelist.c

@@ -0,0 +1,114 @@
+#include <efi.h>
+#include <efilib.h>
+
+extern EFI_GUID GraphicsOutputProtocol;
+
+static int memcmp(const void *s1, const void *s2, UINTN n)
+{
+	const unsigned char *c1 = s1, *c2 = s2;
+	int d = 0;
+
+	if (!s1 && !s2)
+		return 0;
+	if (s1 && !s2)
+		return 1;
+	if (!s1 && s2)
+		return -1;
+
+	while (n--) {
+		d = (int)*c1++ - (int)*c2++;
+		if (d)
+			break;
+	}
+	return d;
+}
+
+static void
+print_modes(EFI_GRAPHICS_OUTPUT_PROTOCOL *gop)
+{
+	int i, imax;
+	EFI_STATUS rc;
+
+	imax = gop->Mode->MaxMode;
+
+	Print(L"GOP reports MaxMode %d\n", imax);
+	for (i = 0; i < imax; i++) {
+		EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *info;
+		UINTN SizeOfInfo;
+		rc = uefi_call_wrapper(gop->QueryMode, 4, gop, i, &SizeOfInfo,
+					&info);
+		if (EFI_ERROR(rc) && rc == EFI_NOT_STARTED) {
+			rc = uefi_call_wrapper(gop->SetMode, 2, gop,
+				gop->Mode->Mode);
+			rc = uefi_call_wrapper(gop->QueryMode, 4, gop, i,
+				&SizeOfInfo, &info);
+		}
+
+		if (EFI_ERROR(rc)) {
+			CHAR16 Buffer[64];
+			StatusToString(Buffer, rc);
+			Print(L"%d: Bad response from QueryMode: %s (%d)\n",
+				i, Buffer, rc);
+			continue;
+		}
+		Print(L"%c%d: %dx%d ", memcmp(info,gop->Mode->Info,sizeof(*info)) == 0 ? '*' : ' ', i,
+			info->HorizontalResolution,
+			info->VerticalResolution);
+		switch(info->PixelFormat) {
+			case PixelRedGreenBlueReserved8BitPerColor:
+				Print(L"RGBR");
+				break;
+			case PixelBlueGreenRedReserved8BitPerColor:
+				Print(L"BGRR");
+				break;
+			case PixelBitMask:
+				Print(L"R:%08x G:%08x B:%08x X:%08x",
+					info->PixelInformation.RedMask,
+					info->PixelInformation.GreenMask,
+					info->PixelInformation.BlueMask,
+					info->PixelInformation.ReservedMask);
+				break;
+			case PixelBltOnly:
+				Print(L"(blt only)");
+				break;
+			default:
+				Print(L"(Invalid pixel format)");
+				break;
+		}
+		Print(L" pitch %d\n", info->PixelsPerScanLine);
+	}
+}
+
+static EFI_STATUS
+SetWatchdog(UINTN seconds)
+{
+	EFI_STATUS rc;
+	rc = uefi_call_wrapper(BS->SetWatchdogTimer, 4, seconds, 0x1ffff,
+				0, NULL);
+	if (EFI_ERROR(rc)) {
+		CHAR16 Buffer[64];
+		StatusToString(Buffer, rc);
+		Print(L"Bad response from QueryMode: %s (%d)\n", Buffer, rc);
+	}
+	return rc;
+}
+
+EFI_STATUS
+efi_main (EFI_HANDLE image_handle, EFI_SYSTEM_TABLE *systab)
+{
+	EFI_STATUS rc;
+	EFI_GRAPHICS_OUTPUT_PROTOCOL *gop;
+
+	InitializeLib(image_handle, systab);
+
+	SetWatchdog(10);
+
+	rc = LibLocateProtocol(&GraphicsOutputProtocol, (void **)&gop);
+	if (EFI_ERROR(rc))
+		return rc;
+
+	print_modes(gop);
+
+	SetWatchdog(0);
+	return EFI_SUCCESS;
+}

+ 146 - 0
gnu-efi-3.0/apps/route80h.c

@@ -0,0 +1,146 @@
+#include <efi.h>
+#include <efilib.h>
+
+/* this example program changes the Reserved Page Route (RPR) bit on ICH10's General
+ * Control And Status Register (GCS) from LPC to PCI.  In practical terms, it routes
+ * outb to port 80h to the PCI bus. */
+
+#define GCS_OFFSET_ADDR 0x3410
+#define GCS_RPR_SHIFT 2
+#define GCS_RPR_PCI 1
+#define GCS_RPR_LPC 0
+
+#define VENDOR_ID_INTEL 0x8086
+#define DEVICE_ID_LPCIF 0x3a16
+#define DEVICE_ID_COUGARPOINT_LPCIF 0x1c56
+
+static EFI_HANDLE ImageHandle;
+
+typedef struct {
+	uint16_t vendor_id;	/* 00-01 */
+	uint16_t device_id;	/* 02-03 */
+	char pad[0xEB];		/* 04-EF */
+	uint32_t rcba;		/* F0-F3 */
+	uint32_t reserved[3];	/* F4-FF */
+} lpcif_t;
+
+static inline void set_bit(volatile uint32_t *flag, int bit, int value)
+{
+	uint32_t val = *flag;
+	Print(L"current value is 0x%2x\n", val);
+
+	if (value) {
+		val |= (1 << bit);
+	} else {
+		val &= ~(1 << bit);
+	}
+	Print(L"setting value to 0x%2x\n", val);
+	*flag = val;
+	val = *flag;
+	Print(L"new value is 0x%2x\n", val);
+}
+
+static inline int configspace_matches_ids(void *config, uint32_t vendor_id,
+				uint32_t device_id)
+{
+	uint32_t *cfg = config;
+	if (cfg[0] == vendor_id && cfg[1] == device_id)
+		return 1;
+	return 0;
+}
+
+static int is_device(EFI_PCI_IO *pciio, uint16_t vendor_id, uint16_t device_id)
+{
+	lpcif_t lpcif;
+	EFI_STATUS rc;
+
+	rc = uefi_call_wrapper(pciio->Pci.Read, 5, pciio, EfiPciIoWidthUint16, 0, 2, &lpcif);
+	if (EFI_ERROR(rc))
+		return 0;
+
+	if (vendor_id == lpcif.vendor_id && device_id == lpcif.device_id)
+		return 1;
+	return 0;
+}
+
+static EFI_STATUS find_pci_device(uint16_t vendor_id, uint16_t device_id,
+				EFI_PCI_IO **pciio)
+{
+	EFI_STATUS rc;
+	EFI_HANDLE *Handles;
+	UINTN NoHandles;
+	int i;
+
+	if (!pciio)
+		return EFI_INVALID_PARAMETER;
+
+	rc = LibLocateHandle(ByProtocol, &PciIoProtocol, NULL, &NoHandles,
+			     &Handles);
+	if (EFI_ERROR(rc))
+		return rc;
+
+	for (i = 0; i < NoHandles; i++) {
+		void *pciio_tmp = NULL;
+		rc = uefi_call_wrapper(BS->OpenProtocol, 6, Handles[i],
+				    &PciIoProtocol, &pciio_tmp, ImageHandle,
+				    NULL, EFI_OPEN_PROTOCOL_GET_PROTOCOL);
+		if (EFI_ERROR(rc))
+			continue;
+		*pciio = pciio_tmp;
+		if (!is_device(*pciio, vendor_id, device_id)) {
+			*pciio = NULL;
+			continue;
+		}
+
+		return EFI_SUCCESS;
+	}
+	return EFI_NOT_FOUND;
+}
+
+EFI_STATUS
+efi_main (EFI_HANDLE image_handle, EFI_SYSTEM_TABLE *systab)
+{
+	InitializeLib(image_handle, systab);
+	EFI_PCI_IO *pciio = NULL;
+	lpcif_t lpcif;
+	EFI_STATUS rc;
+	struct {
+		uint16_t vendor;
+		uint16_t device;
+	} devices[] = {
+		{ VENDOR_ID_INTEL, DEVICE_ID_LPCIF },
+		{ VENDOR_ID_INTEL, DEVICE_ID_COUGARPOINT_LPCIF },
+		{ 0, 0 }
+	};
+	int i;
+
+	ImageHandle = image_handle;
+	for (i = 0; devices[i].vendor != 0; i++) {
+		rc = find_pci_device(devices[i].vendor, devices[i].device, &pciio);
+		if (EFI_ERROR(rc))
+			continue;
+	}
+
+	if (rc == EFI_NOT_FOUND) {
+		Print(L"Device not found.\n");
+		return rc;
+	} else if (EFI_ERROR(rc)) {
+		return rc;
+	}
+
+	rc = uefi_call_wrapper(pciio->Pci.Read, 5, pciio, EfiPciIoWidthUint32,
+		EFI_FIELD_OFFSET(lpcif_t, rcba), 1, &lpcif.rcba);
+	if (EFI_ERROR(rc))
+		return rc;
+	if (!(lpcif.rcba & 1)) {
+		Print(L"rcrb is not mapped, cannot route port 80h\n");
+		return EFI_UNSUPPORTED;
+	}
+	lpcif.rcba &= ~1UL;
+
+	Print(L"rcba: 0x%8x\n", lpcif.rcba, lpcif.rcba);
+	set_bit((uint32_t *)(uint64_t)(lpcif.rcba + GCS_OFFSET_ADDR),
+		     GCS_RPR_SHIFT, GCS_RPR_PCI);
+
+	return EFI_SUCCESS;
+}