K210 device tree configuration

.gitignore

@@ -1,2 +1,4 @@
 /target
 Cargo.lock
+
+.DS_Store

platform/k210/kendryte-k210.dtsi

@@ -0,0 +1,135 @@
+// Source: https://github.com/torvalds/linux/blob/master/arch/riscv/boot/dts/kendryte/k210.dtsi
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/*
+#define K210_CLK_PLL0   0
+#define K210_CLK_PLL1   0
+#define K210_CLK_ACLK   0
+#define K210_CLK_CPU    0
+*/
+
+// todo: generate clock speed in sbi binary
+
+/ {
+	/*
+	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
+	 * wide, and the upper half of all addresses is ignored.
+	 */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "kendryte,k210";
+
+	aliases {
+		serial0 = &uarths0;
+	};
+
+	/*
+	 * The K210 has an sv39 MMU following the priviledge specification v1.9.
+	 * Since this is a non-ratified draft specification, the kernel does not
+	 * support it and the K210 support enabled only for the !MMU case.
+	 * Be consistent with this by setting the CPUs MMU type to "none".
+	 */
+    /* No, I want to use mmu in my application -- luojia65 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <7800000>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "none";
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			clocks = <&sysctl K210_CLK_CPU>;
+			clock-frequency = <390000000>;
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "none";
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			clocks = <&sysctl K210_CLK_CPU>;
+			clock-frequency = <390000000>;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+	};
+
+	sram: memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x400000>,
+		      <0x80400000 0x200000>,
+		      <0x80600000 0x200000>;
+		reg-names = "sram0", "sram1", "aisram";
+	};
+
+	clocks {
+		in0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "kendryte,k210-soc", "simple-bus";
+		ranges;
+		interrupt-parent = <&plic0>;
+
+		sysctl: sysctl@50440000 {
+			compatible = "kendryte,k210-sysctl", "simple-mfd";
+			reg = <0x50440000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		clint0: interrupt-controller@2000000 {
+			compatible = "riscv,clint0";
+			reg = <0x2000000 0xC000>;
+			interrupts-extended = <&cpu0_intc 3>,  <&cpu1_intc 3>;
+			clocks = <&sysctl K210_CLK_ACLK>;
+		};
+
+		plic0: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "kendryte,k210-plic0", "riscv,plic0";
+			reg = <0xC000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>,
+					      <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>;
+			riscv,ndev = <65>;
+			riscv,max-priority = <7>;
+		};
+
+		uarths0: serial@38000000 {
+			compatible = "kendryte,k210-uarths", "sifive,uart0";
+			reg = <0x38000000 0x1000>;
+			interrupts = <33>;
+			clocks = <&sysctl K210_CLK_CPU>;
+		};
+
+		// todo: other peripherals -- luojia65
+	};
+};