rustsbi/docs/booting-openwrt-in-qemu-using-uboot-and-rustsbi.md

使用RustSBI & U-Boot在QEMU中启动 Openwrt

本教程给出了使用RustSBI和U-Boot在QEMU中启动Openwrt的基本流程。

本教程使用软件版本如下：

软件	版本
riscv64-linux-gnu-gcc	14.1.0
qemu-system-riscv64	9.0.1
RustSBI Prototyper	0.0.0
U-Boot	2024.04

准备RustSBI Prototyper， U-Boot ，Openwrt

创建工作目录并进入该目录

$ mkdir workshop && cd workshop

Clone RustSBI Prototyper

$ git clone https://github.com/rustsbi/prototyper.git && cd prototyper && git checkout main && cd ..

Clone U-Boot

$ git clone https://github.com/u-boot/u-boot.git && cd u-boot && git checkout v2024.04 && cd ..

Clone & Patch Openwrt

$ git clone https://git.openwrt.org/openwrt/openwrt.git 

应用以下 patch：

diff --git a/package/boot/uboot-sifiveu/patches/200-invalid-version.patch b/package/boot/uboot-sifiveu/patches/200-invalid-version.patch
new file mode 100644
index 0000000000..9bb5c814d2
--- /dev/null
+++ b/package/boot/uboot-sifiveu/patches/200-invalid-version.patch
@@ -0,0 +1,12 @@
+--- a/scripts/dtc/pylibfdt/Makefile
++++ b/scripts/dtc/pylibfdt/Makefile
+@@ -17,7 +17,7 @@ quiet_cmd_pymod = PYMOD   $@
+       cmd_pymod = unset CROSS_COMPILE; unset CFLAGS; \
+               CC="$(HOSTCC)" LDSHARED="$(HOSTCC) -shared " \
+               LDFLAGS="$(HOSTLDFLAGS)" \
+-              VERSION="u-boot-$(UBOOTVERSION)" \
++              VERSION="$(UBOOTVERSION)" \
+               CPPFLAGS="$(HOSTCFLAGS) -I$(LIBFDT_srcdir)" OBJDIR=$(obj) \
+               SOURCES="$(PYLIBFDT_srcs)" \
+               SWIG_OPTS="-I$(LIBFDT_srcdir) -I$(LIBFDT_srcdir)/.." \
+--
diff --git a/target/linux/sifiveu/base-files/etc/inittab b/target/linux/sifiveu/base-files/etc/inittab
index 69f97c47c8..0d8ead1d91 100644
--- a/target/linux/sifiveu/base-files/etc/inittab
+++ b/target/linux/sifiveu/base-files/etc/inittab
@@ -1,4 +1,5 @@
 ::sysinit:/etc/init.d/rcS S boot
 ::shutdown:/etc/init.d/rcS K shutdown
 ttySIF0::askfirst:/usr/libexec/login.sh
+ttyS0::askfirst:/usr/libexec/login.sh
 tty1::askfirst:/usr/libexec/login.sh

编译RustSBI Prototyper

进入prototyper目录

$ cd prototyper

编译RustSBI Prototyper

$ cargo make prototyper

编译U-Boot SPL

进入U-Boot目录

$ cd u-boot

导出环境变量

$ export ARCH=riscv
$ export CROSS_COMPILE=riscv64-linux-gnu-
$ export OPENSBI=../prototyper/target/riscv64imac-unknown-none-elf/release/rustsbi-prototyper.bin 

生成.config文件,编译U-Boot

# To generate .config file out of board configuration file
$ make qemu-riscv64_spl_defconfig
$ sed -i.bak 's/CONFIG_BOOTCOMMAND=*/CONFIG_BOOTCOMMAND="scsi scan; fatload scsi 0:3 84000000 Image; setenv bootargs root=\/dev\/sda4 rw earlycon console=\/dev\/ttyS0 rootwait; booti 0x84000000 - ${fdtcontroladdr};"/' .config
$ make -j$(nproc)

编译 Openwrt

首先，你应先按照 https://openwrt.org/docs/guide-developer/toolchain/install-buildsystem 配置自己的编译环境。

（以下内容参照并修改自 https://openwrt.org/docs/guide-developer/toolchain/use-buildsystem）

更新 Feeds：

cd openwrt
# Update the feeds
./scripts/feeds update -a
./scripts/feeds install -a

修改配置：

make -j$(nproc) menuconfig

进入 Target System，选中 SiFive U-based RISC-V boards

修改内核配置：

make -j$(nproc) kernel_menuconfig

进入后将
"Device Drivers -> Serial ATA and Parallel ATA drivers (libata) -> AHCI SATA support"
"Device Drivers -> Network device support -> Ethernet driver support -> Intel devices -> Intel(R) PRO/1000 Gigabit Ethernet support"
设为 built-in。

编译镜像：

# Build the firmware image
make -j$(nproc) defconfig download clean world

拷贝并解压镜像：

cd ..
cp ./openwrt/bin/targets/sifiveu/generic/openwrt-sifiveu-generic-sifive_unleashed-ext4-sdcard.img.gz ./
unar openwrt-sifiveu-generic-sifive_unleashed-ext4-sdcard.img.gz

使用RustSBI 原型系统和U-Boot启动 Openwrt

进入workshop目录

$ cd workshop

运行下面命令

$ qemu-system-riscv64 \
-machine virt -nographic -m 4096 -smp 1 \
-bios ./u-boot/spl/u-boot-spl \
-device virtio-rng-pci -device ahci,id=ahci -device ide-hd,bus=ahci.0,drive=mydrive \
-drive file=./openwrt-sifiveu-generic-sifive_unleashed-ext4-sdcard.img,format=raw,if=none,id=mydrive \
-device loader,file=./u-boot/u-boot.itb,addr=0x80200000 \
-device e1000,netdev=n1 -netdev user,id=n1,hostfwd=tcp::12055-:22