Migrate to Git

.cvsignore

@@ -1,18 +0,0 @@
-*.bz2
-*.gz
-*.tar
-.bootstrap
-ABOUT-NLS
-INSTALL
-Makefile
-Makefile.in
-aclocal.m4
-autom4te.cache
-build-aux
-config.*
-configure
-gnulib
-m4
-rmt
-stamp-h1
-tar-[0-9]*

.gitignore

@@ -0,0 +1,31 @@
+*.a
+*.la
+*.lo
+*.o
+*.so
+*~
+.bootstrap
+.deps
+.emacs*
+.libs
+ABOUT-NLS
+ChangeLog
+INSTALL
+Makefile
+Makefile.in
+Make.rules
+aclocal.m4
+autom4te.cache
+config.h
+config.h.in
+config.log
+config.status
+configure
+gnulib
+libtool
+m4
+paxutils
+stamp-h1
+build-aux/
+gnu
+

Makefile.am

@@ -1,7 +1,7 @@
 # Main Makefile for GNU tar.
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2003, 2007 Free
-# Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2003, 2007,
+# 2009 Free Software Foundation, Inc.
 
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -19,13 +19,22 @@
 ## 02110-1301, USA.
 
 ACLOCAL_AMFLAGS = -I m4
-EXTRA_DIST = ChangeLog.1 PORTS
-SUBDIRS = doc lib rmt src scripts po tests
+EXTRA_DIST = ChangeLog.1 Make.rules
+SUBDIRS = doc gnu lib rmt src scripts po tests
 
 dist-hook: 
+	$(MAKE) changelog_dir=$(distdir) make-ChangeLog
 	-rm -f $(distdir).cpio
 	find $(distdir) | cpio -Hcrc -o | \
           GZIP=$(GZIP_ENV) gzip -c > $(distdir).cpio.gz
 
 distclean-local:
 	-rm -f $(distdir).cpio.gz
+
+include Make.rules
+
+gen_start_date = 2009-03-06
+prev_change_log = ChangeLog.CVS
+changelog_dir = .
+
+

Makefile.in

@@ -1,163 +1,767 @@
-# Makefile.in generated automatically by automake 1.1n from Makefile.am
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# @configure_input@
 
-# Copyright (C) 1994, 1995, 1996 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Main Makefile for GNU tar.
-# Copyright (C) 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
 
+@SET_MAKE@
 
-SHELL = /bin/sh
+# Main Makefile for GNU tar.
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
+# Copyright (C) 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2003, 2007,
+# 2009 Free Software Foundation, Inc.
+
+# This file is part of GNU paxutils
+#
+# Copyright (c) 2009 Free Software Foundation, Inc.
+#
+# Written by Sergey Poznyakoff
+#
+# GNU Paxutils is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 3, or (at your option) any later
+# version.
+#
+# GNU Paxutils is distributed in the hope that it will be useful, but
+# without any warranty; without even the implied warranty of
+# merchantability or fitness for a particular purpose.  see the gnu general
+# public license for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with GNU Paxutils; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# This file is part of GNU paxutils
+#
+# Copyright (c) 2009 Free Software Foundation, Inc.
+#
+# Written by Sergey Poznyakoff
+#
+# GNU Paxutils is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 3, or (at your option) any later
+# version.
+#
+# GNU Paxutils is distributed in the hope that it will be useful, but
+# without any warranty; without even the implied warranty of
+# merchantability or fitness for a particular purpose.  see the gnu general
+# public license for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with GNU Paxutils; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Define the following variables in order to use the ChangeLog rule below:
+#  prev_change_log  [optional]  Name of the previous ChangeLog file.
+#  gen_start_date   [optional]  Start ChangeLog from this date. 
+#  changelog_dir    [mandatory] Directory where to create ChangeLog
 VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
-NORMAL_INSTALL = true
-PRE_INSTALL = true
-POST_INSTALL = true
-NORMAL_UNINSTALL = true
-PRE_UNINSTALL = true
-POST_UNINSTALL = true
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Make.rules \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/config.h.in $(top_srcdir)/configure ABOUT-NLS \
+	AUTHORS COPYING ChangeLog INSTALL NEWS THANKS TODO \
+	build-aux/compile build-aux/config.guess \
+	build-aux/config.rpath build-aux/config.sub build-aux/depcomp \
+	build-aux/install-sh build-aux/mdate-sh build-aux/missing \
+	build-aux/texinfo.tex build-aux/ylwrap
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
+	$(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/argmatch.m4 \
+	$(top_srcdir)/m4/argp.m4 $(top_srcdir)/m4/backupfile.m4 \
+	$(top_srcdir)/m4/bison.m4 $(top_srcdir)/m4/btowc.m4 \
+	$(top_srcdir)/m4/canonicalize-lgpl.m4 \
+	$(top_srcdir)/m4/chdir-long.m4 $(top_srcdir)/m4/chown.m4 \
+	$(top_srcdir)/m4/clock_time.m4 \
+	$(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/close.m4 \
+	$(top_srcdir)/m4/closeout.m4 $(top_srcdir)/m4/codeset.m4 \
+	$(top_srcdir)/m4/d-ino.m4 $(top_srcdir)/m4/dirent_h.m4 \
+	$(top_srcdir)/m4/dirfd.m4 $(top_srcdir)/m4/dirname.m4 \
+	$(top_srcdir)/m4/dos.m4 $(top_srcdir)/m4/double-slash-root.m4 \
+	$(top_srcdir)/m4/dup2.m4 $(top_srcdir)/m4/eealloc.m4 \
+	$(top_srcdir)/m4/environ.m4 $(top_srcdir)/m4/errno_h.m4 \
+	$(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exclude.m4 \
+	$(top_srcdir)/m4/exitfail.m4 $(top_srcdir)/m4/extensions.m4 \
+	$(top_srcdir)/m4/fchdir.m4 $(top_srcdir)/m4/fclose.m4 \
+	$(top_srcdir)/m4/fcntl-safer.m4 $(top_srcdir)/m4/fcntl_h.m4 \
+	$(top_srcdir)/m4/fileblocks.m4 $(top_srcdir)/m4/float_h.m4 \
+	$(top_srcdir)/m4/fnmatch.m4 $(top_srcdir)/m4/fpending.m4 \
+	$(top_srcdir)/m4/fseeko.m4 $(top_srcdir)/m4/ftruncate.m4 \
+	$(top_srcdir)/m4/getcwd-abort-bug.m4 \
+	$(top_srcdir)/m4/getcwd-path-max.m4 $(top_srcdir)/m4/getcwd.m4 \
+	$(top_srcdir)/m4/getdate.m4 $(top_srcdir)/m4/getdelim.m4 \
+	$(top_srcdir)/m4/getline.m4 $(top_srcdir)/m4/getopt.m4 \
+	$(top_srcdir)/m4/getpagesize.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/gettime.m4 $(top_srcdir)/m4/gettimeofday.m4 \
+	$(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/gnulib-common.m4 \
+	$(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/hash.m4 \
+	$(top_srcdir)/m4/human.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/intmax_t.m4 \
+	$(top_srcdir)/m4/inttostr.m4 $(top_srcdir)/m4/inttypes-pri.m4 \
+	$(top_srcdir)/m4/inttypes.m4 $(top_srcdir)/m4/inttypes_h.m4 \
+	$(top_srcdir)/m4/lchown.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/locale-fr.m4 \
+	$(top_srcdir)/m4/locale-ja.m4 $(top_srcdir)/m4/locale-zh.m4 \
+	$(top_srcdir)/m4/longlong.m4 $(top_srcdir)/m4/lseek.m4 \
+	$(top_srcdir)/m4/lstat.m4 $(top_srcdir)/m4/malloc.m4 \
+	$(top_srcdir)/m4/malloca.m4 $(top_srcdir)/m4/mbchar.m4 \
+	$(top_srcdir)/m4/mbiter.m4 $(top_srcdir)/m4/mbrtowc.m4 \
+	$(top_srcdir)/m4/mbscasecmp.m4 $(top_srcdir)/m4/mbsinit.m4 \
+	$(top_srcdir)/m4/mbstate_t.m4 $(top_srcdir)/m4/mempcpy.m4 \
+	$(top_srcdir)/m4/memrchr.m4 $(top_srcdir)/m4/mkdtemp.m4 \
+	$(top_srcdir)/m4/mktime.m4 $(top_srcdir)/m4/modechange.m4 \
+	$(top_srcdir)/m4/multiarch.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/open.m4 $(top_srcdir)/m4/openat.m4 \
+	$(top_srcdir)/m4/pathmax.m4 $(top_srcdir)/m4/paxutils.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/printf.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quote.m4 \
+	$(top_srcdir)/m4/quotearg.m4 $(top_srcdir)/m4/rawmemchr.m4 \
+	$(top_srcdir)/m4/readlink.m4 $(top_srcdir)/m4/realloc.m4 \
+	$(top_srcdir)/m4/regex.m4 $(top_srcdir)/m4/rmt.m4 \
+	$(top_srcdir)/m4/rpmatch.m4 $(top_srcdir)/m4/rtapelib.m4 \
+	$(top_srcdir)/m4/safe-read.m4 $(top_srcdir)/m4/safe-write.m4 \
+	$(top_srcdir)/m4/save-cwd.m4 $(top_srcdir)/m4/savedir.m4 \
+	$(top_srcdir)/m4/setenv.m4 $(top_srcdir)/m4/size_max.m4 \
+	$(top_srcdir)/m4/sleep.m4 $(top_srcdir)/m4/snprintf.m4 \
+	$(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stat-time.m4 \
+	$(top_srcdir)/m4/stdarg.m4 $(top_srcdir)/m4/stdbool.m4 \
+	$(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/stdint_h.m4 \
+	$(top_srcdir)/m4/stdio_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
+	$(top_srcdir)/m4/stpcpy.m4 $(top_srcdir)/m4/strcase.m4 \
+	$(top_srcdir)/m4/strchrnul.m4 $(top_srcdir)/m4/strdup.m4 \
+	$(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
+	$(top_srcdir)/m4/strings_h.m4 $(top_srcdir)/m4/strndup.m4 \
+	$(top_srcdir)/m4/strnlen.m4 $(top_srcdir)/m4/strtoimax.m4 \
+	$(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/strtoll.m4 \
+	$(top_srcdir)/m4/strtoul.m4 $(top_srcdir)/m4/strtoull.m4 \
+	$(top_srcdir)/m4/strtoumax.m4 $(top_srcdir)/m4/sys_stat_h.m4 \
+	$(top_srcdir)/m4/sys_time_h.m4 $(top_srcdir)/m4/sysexits.m4 \
+	$(top_srcdir)/m4/system.m4 $(top_srcdir)/m4/tempname.m4 \
+	$(top_srcdir)/m4/time_h.m4 $(top_srcdir)/m4/time_r.m4 \
+	$(top_srcdir)/m4/timespec.m4 $(top_srcdir)/m4/tm_gmtoff.m4 \
+	$(top_srcdir)/m4/unistd-safer.m4 $(top_srcdir)/m4/unistd_h.m4 \
+	$(top_srcdir)/m4/unlinkdir.m4 $(top_srcdir)/m4/unlocked-io.m4 \
+	$(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/m4/utime.m4 \
+	$(top_srcdir)/m4/utimens.m4 $(top_srcdir)/m4/utimes-null.m4 \
+	$(top_srcdir)/m4/utimes.m4 $(top_srcdir)/m4/vasnprintf.m4 \
+	$(top_srcdir)/m4/vsnprintf.m4 $(top_srcdir)/m4/wchar.m4 \
+	$(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wcrtomb.m4 \
+	$(top_srcdir)/m4/wctype.m4 $(top_srcdir)/m4/wcwidth.m4 \
+	$(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/write.m4 \
+	$(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/xgetcwd.m4 \
+	$(top_srcdir)/m4/xsize.m4 $(top_srcdir)/m4/xstrndup.m4 \
+	$(top_srcdir)/m4/xstrtol.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 \
+	$(distdir).shar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+ALLOCA_H = @ALLOCA_H@
+AMTAR = @AMTAR@
+APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
 AUTOMAKE = @AUTOMAKE@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
+AWK = @AWK@
+BACKUP_LIBEXEC_SCRIPTS = @BACKUP_LIBEXEC_SCRIPTS@
+BACKUP_SBIN_SCRIPTS = @BACKUP_SBIN_SCRIPTS@
+BACKUP_SED_COND = @BACKUP_SED_COND@
+BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
+BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
+BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
+BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
+BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
 CC = @CC@
-DATADIRNAME = @DATADIRNAME@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFAULT_ARCHIVE = @DEFAULT_ARCHIVE@
+DEFAULT_ARCHIVE_FORMAT = @DEFAULT_ARCHIVE_FORMAT@
+DEFAULT_BLOCKING = @DEFAULT_BLOCKING@
+DEFAULT_QUOTING_STYLE = @DEFAULT_QUOTING_STYLE@
+DEFAULT_RMT_COMMAND = @DEFAULT_RMT_COMMAND@
+DEFAULT_RMT_DIR = @DEFAULT_RMT_DIR@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DIRENT_H = @DIRENT_H@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
-GENCAT = @GENCAT@
-GMOFILES = @GMOFILES@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
+EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
+ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
+ENOLINK_VALUE = @ENOLINK_VALUE@
+EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
+EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
+ERRNO_H = @ERRNO_H@
+EXEEXT = @EXEEXT@
+FCNTL_H = @FCNTL_H@
+FLOAT_H = @FLOAT_H@
+FNMATCH_H = @FNMATCH_H@
+GETOPT_H = @GETOPT_H@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLIBC21 = @GLIBC21@
 GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
-INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
+GMSGFMT_015 = @GMSGFMT_015@
+GNULIB_ALPHASORT = @GNULIB_ALPHASORT@
+GNULIB_ATOLL = @GNULIB_ATOLL@
+GNULIB_BTOWC = @GNULIB_BTOWC@
+GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
+GNULIB_CHOWN = @GNULIB_CHOWN@
+GNULIB_CLOSE = @GNULIB_CLOSE@
+GNULIB_DIRFD = @GNULIB_DIRFD@
+GNULIB_DPRINTF = @GNULIB_DPRINTF@
+GNULIB_DUP2 = @GNULIB_DUP2@
+GNULIB_ENVIRON = @GNULIB_ENVIRON@
+GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
+GNULIB_FCHDIR = @GNULIB_FCHDIR@
+GNULIB_FCLOSE = @GNULIB_FCLOSE@
+GNULIB_FFLUSH = @GNULIB_FFLUSH@
+GNULIB_FOPEN = @GNULIB_FOPEN@
+GNULIB_FPRINTF = @GNULIB_FPRINTF@
+GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
+GNULIB_FPUTC = @GNULIB_FPUTC@
+GNULIB_FPUTS = @GNULIB_FPUTS@
+GNULIB_FREOPEN = @GNULIB_FREOPEN@
+GNULIB_FSEEK = @GNULIB_FSEEK@
+GNULIB_FSEEKO = @GNULIB_FSEEKO@
+GNULIB_FSYNC = @GNULIB_FSYNC@
+GNULIB_FTELL = @GNULIB_FTELL@
+GNULIB_FTELLO = @GNULIB_FTELLO@
+GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
+GNULIB_FWRITE = @GNULIB_FWRITE@
+GNULIB_GETCWD = @GNULIB_GETCWD@
+GNULIB_GETDELIM = @GNULIB_GETDELIM@
+GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
+GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
+GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
+GNULIB_GETLINE = @GNULIB_GETLINE@
+GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
+GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
+GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
+GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
+GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
+GNULIB_IMAXABS = @GNULIB_IMAXABS@
+GNULIB_IMAXDIV = @GNULIB_IMAXDIV@
+GNULIB_LCHMOD = @GNULIB_LCHMOD@
+GNULIB_LCHOWN = @GNULIB_LCHOWN@
+GNULIB_LINK = @GNULIB_LINK@
+GNULIB_LSEEK = @GNULIB_LSEEK@
+GNULIB_LSTAT = @GNULIB_LSTAT@
+GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
+GNULIB_MBRLEN = @GNULIB_MBRLEN@
+GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
+GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
+GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
+GNULIB_MBSCHR = @GNULIB_MBSCHR@
+GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
+GNULIB_MBSINIT = @GNULIB_MBSINIT@
+GNULIB_MBSLEN = @GNULIB_MBSLEN@
+GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
+GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
+GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
+GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
+GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
+GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
+GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
+GNULIB_MBSSEP = @GNULIB_MBSSEP@
+GNULIB_MBSSPN = @GNULIB_MBSSPN@
+GNULIB_MBSSTR = @GNULIB_MBSSTR@
+GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
+GNULIB_MEMMEM = @GNULIB_MEMMEM@
+GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
+GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
+GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
+GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
+GNULIB_OBSTACK_PRINTF = @GNULIB_OBSTACK_PRINTF@
+GNULIB_OBSTACK_PRINTF_POSIX = @GNULIB_OBSTACK_PRINTF_POSIX@
+GNULIB_OPEN = @GNULIB_OPEN@
+GNULIB_PERROR = @GNULIB_PERROR@
+GNULIB_PRINTF = @GNULIB_PRINTF@
+GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
+GNULIB_PUTC = @GNULIB_PUTC@
+GNULIB_PUTCHAR = @GNULIB_PUTCHAR@
+GNULIB_PUTENV = @GNULIB_PUTENV@
+GNULIB_PUTS = @GNULIB_PUTS@
+GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
+GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
+GNULIB_READLINK = @GNULIB_READLINK@
+GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
+GNULIB_RPMATCH = @GNULIB_RPMATCH@
+GNULIB_SCANDIR = @GNULIB_SCANDIR@
+GNULIB_SETENV = @GNULIB_SETENV@
+GNULIB_SLEEP = @GNULIB_SLEEP@
+GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
+GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
+GNULIB_STDIO_H_SIGPIPE = @GNULIB_STDIO_H_SIGPIPE@
+GNULIB_STPCPY = @GNULIB_STPCPY@
+GNULIB_STPNCPY = @GNULIB_STPNCPY@
+GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
+GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
+GNULIB_STRDUP = @GNULIB_STRDUP@
+GNULIB_STRERROR = @GNULIB_STRERROR@
+GNULIB_STRNDUP = @GNULIB_STRNDUP@
+GNULIB_STRNLEN = @GNULIB_STRNLEN@
+GNULIB_STRPBRK = @GNULIB_STRPBRK@
+GNULIB_STRSEP = @GNULIB_STRSEP@
+GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
+GNULIB_STRSTR = @GNULIB_STRSTR@
+GNULIB_STRTOD = @GNULIB_STRTOD@
+GNULIB_STRTOIMAX = @GNULIB_STRTOIMAX@
+GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
+GNULIB_STRTOLL = @GNULIB_STRTOLL@
+GNULIB_STRTOULL = @GNULIB_STRTOULL@
+GNULIB_STRTOUMAX = @GNULIB_STRTOUMAX@
+GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
+GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
+GNULIB_UNSETENV = @GNULIB_UNSETENV@
+GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
+GNULIB_VDPRINTF = @GNULIB_VDPRINTF@
+GNULIB_VFPRINTF = @GNULIB_VFPRINTF@
+GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
+GNULIB_VPRINTF = @GNULIB_VPRINTF@
+GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
+GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
+GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
+GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
+GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
+GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
+GNULIB_WCTOB = @GNULIB_WCTOB@
+GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
+GNULIB_WRITE = @GNULIB_WRITE@
+GREP = @GREP@
+HAVE_ALPHASORT = @HAVE_ALPHASORT@
+HAVE_ATOLL = @HAVE_ATOLL@
+HAVE_BTOWC = @HAVE_BTOWC@
+HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
+HAVE_DECL_DIRFD = @HAVE_DECL_DIRFD@
+HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
+HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
+HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
+HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
+HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
+HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@
+HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@
+HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
+HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
+HAVE_DECL_OBSTACK_PRINTF = @HAVE_DECL_OBSTACK_PRINTF@
+HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
+HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
+HAVE_DECL_STRERROR = @HAVE_DECL_STRERROR@
+HAVE_DECL_STRNCASECMP = @HAVE_DECL_STRNCASECMP@
+HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
+HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
+HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
+HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@
+HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
+HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@
+HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
+HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
+HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
+HAVE_DPRINTF = @HAVE_DPRINTF@
+HAVE_DUP2 = @HAVE_DUP2@
+HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
+HAVE_FSEEKO = @HAVE_FSEEKO@
+HAVE_FSYNC = @HAVE_FSYNC@
+HAVE_FTELLO = @HAVE_FTELLO@
+HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
+HAVE_GETDOMAINNAME = @HAVE_GETDOMAINNAME@
+HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
+HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
+HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
+HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
+HAVE_GETUSERSHELL = @HAVE_GETUSERSHELL@
+HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
+HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
+HAVE_LCHMOD = @HAVE_LCHMOD@
+HAVE_LINK = @HAVE_LINK@
+HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
+HAVE_LSTAT = @HAVE_LSTAT@
+HAVE_MALLOC_POSIX = @HAVE_MALLOC_POSIX@
+HAVE_MBRLEN = @HAVE_MBRLEN@
+HAVE_MBRTOWC = @HAVE_MBRTOWC@
+HAVE_MBSINIT = @HAVE_MBSINIT@
+HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
+HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
+HAVE_MEMPCPY = @HAVE_MEMPCPY@
+HAVE_MKDTEMP = @HAVE_MKDTEMP@
+HAVE_OS_H = @HAVE_OS_H@
+HAVE_RANDOM_H = @HAVE_RANDOM_H@
+HAVE_RANDOM_R = @HAVE_RANDOM_R@
+HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
+HAVE_READLINK = @HAVE_READLINK@
+HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
+HAVE_RPMATCH = @HAVE_RPMATCH@
+HAVE_SCANDIR = @HAVE_SCANDIR@
+HAVE_SETENV = @HAVE_SETENV@
+HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
+HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
+HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
+HAVE_SLEEP = @HAVE_SLEEP@
+HAVE_STDINT_H = @HAVE_STDINT_H@
+HAVE_STPCPY = @HAVE_STPCPY@
+HAVE_STPNCPY = @HAVE_STPNCPY@
+HAVE_STRCASECMP = @HAVE_STRCASECMP@
+HAVE_STRCASESTR = @HAVE_STRCASESTR@
+HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
+HAVE_STRNDUP = @HAVE_STRNDUP@
+HAVE_STRPBRK = @HAVE_STRPBRK@
+HAVE_STRSEP = @HAVE_STRSEP@
+HAVE_STRTOD = @HAVE_STRTOD@
+HAVE_STRTOLL = @HAVE_STRTOLL@
+HAVE_STRTOULL = @HAVE_STRTOULL@
+HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
+HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
+HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
+HAVE_SYSEXITS_H = @HAVE_SYSEXITS_H@
+HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
+HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
+HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
+HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
+HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
+HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
+HAVE_UNISTD_H = @HAVE_UNISTD_H@
+HAVE_UNSETENV = @HAVE_UNSETENV@
+HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
+HAVE_VASPRINTF = @HAVE_VASPRINTF@
+HAVE_VDPRINTF = @HAVE_VDPRINTF@
+HAVE_WCHAR_H = @HAVE_WCHAR_H@
+HAVE_WCRTOMB = @HAVE_WCRTOMB@
+HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
+HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
+HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
+HAVE_WINT_T = @HAVE_WINT_T@
+HAVE__BOOL = @HAVE__BOOL@
+INCLUDE_NEXT = @INCLUDE_NEXT@
+INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INT32_MAX_LT_INTMAX_MAX = @INT32_MAX_LT_INTMAX_MAX@
+INT64_MAX_EQ_LONG_MAX = @INT64_MAX_EQ_LONG_MAX@
 INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+INTTYPES_H = @INTTYPES_H@
+LDFLAGS = @LDFLAGS@
+LIBGNU_LIBDEPS = @LIBGNU_LIBDEPS@
+LIBGNU_LTLIBDEPS = @LIBGNU_LTLIBDEPS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIB_CLOCK_GETTIME = @LIB_CLOCK_GETTIME@
+LIB_CLOSE = @LIB_CLOSE@
+LIB_SETSOCKOPT = @LIB_SETSOCKOPT@
+LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
+LOCALE_FR = @LOCALE_FR@
+LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
+LOCALE_JA = @LOCALE_JA@
+LOCALE_ZH_CN = @LOCALE_ZH_CN@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
-MKINSTALLDIRS = @MKINSTALLDIRS@
+MKDIR_P = @MKDIR_P@
 MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEXT_DIRENT_H = @NEXT_DIRENT_H@
+NEXT_ERRNO_H = @NEXT_ERRNO_H@
+NEXT_FCNTL_H = @NEXT_FCNTL_H@
+NEXT_FLOAT_H = @NEXT_FLOAT_H@
+NEXT_INTTYPES_H = @NEXT_INTTYPES_H@
+NEXT_STDARG_H = @NEXT_STDARG_H@
+NEXT_STDINT_H = @NEXT_STDINT_H@
+NEXT_STDIO_H = @NEXT_STDIO_H@
+NEXT_STDLIB_H = @NEXT_STDLIB_H@
+NEXT_STRINGS_H = @NEXT_STRINGS_H@
+NEXT_STRING_H = @NEXT_STRING_H@
+NEXT_SYSEXITS_H = @NEXT_SYSEXITS_H@
+NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
+NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
+NEXT_TIME_H = @NEXT_TIME_H@
+NEXT_UNISTD_H = @NEXT_UNISTD_H@
+NEXT_WCHAR_H = @NEXT_WCHAR_H@
+NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
+OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
-POFILES = @POFILES@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
 POSUB = @POSUB@
+PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
+PRIPTR_PREFIX = @PRIPTR_PREFIX@
+PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@
+PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
+PU_RMT_PROG = @PU_RMT_PROG@
 RANLIB = @RANLIB@
-RMT = @RMT@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
+REPLACE_BTOWC = @REPLACE_BTOWC@
+REPLACE_CHOWN = @REPLACE_CHOWN@
+REPLACE_CLOSE = @REPLACE_CLOSE@
+REPLACE_DPRINTF = @REPLACE_DPRINTF@
+REPLACE_FCHDIR = @REPLACE_FCHDIR@
+REPLACE_FCLOSE = @REPLACE_FCLOSE@
+REPLACE_FFLUSH = @REPLACE_FFLUSH@
+REPLACE_FOPEN = @REPLACE_FOPEN@
+REPLACE_FPRINTF = @REPLACE_FPRINTF@
+REPLACE_FREOPEN = @REPLACE_FREOPEN@
+REPLACE_FSEEK = @REPLACE_FSEEK@
+REPLACE_FSEEKO = @REPLACE_FSEEKO@
+REPLACE_FTELL = @REPLACE_FTELL@
+REPLACE_FTELLO = @REPLACE_FTELLO@
+REPLACE_GETCWD = @REPLACE_GETCWD@
+REPLACE_GETLINE = @REPLACE_GETLINE@
+REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
+REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
+REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
+REPLACE_LCHOWN = @REPLACE_LCHOWN@
+REPLACE_LOCALTIME_R = @REPLACE_LOCALTIME_R@
+REPLACE_LSEEK = @REPLACE_LSEEK@
+REPLACE_LSTAT = @REPLACE_LSTAT@
+REPLACE_MBRLEN = @REPLACE_MBRLEN@
+REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
+REPLACE_MBSINIT = @REPLACE_MBSINIT@
+REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
+REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
+REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
+REPLACE_MEMMEM = @REPLACE_MEMMEM@
+REPLACE_MKDIR = @REPLACE_MKDIR@
+REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
+REPLACE_NANOSLEEP = @REPLACE_NANOSLEEP@
+REPLACE_OBSTACK_PRINTF = @REPLACE_OBSTACK_PRINTF@
+REPLACE_OPEN = @REPLACE_OPEN@
+REPLACE_PERROR = @REPLACE_PERROR@
+REPLACE_PRINTF = @REPLACE_PRINTF@
+REPLACE_PUTENV = @REPLACE_PUTENV@
+REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
+REPLACE_SPRINTF = @REPLACE_SPRINTF@
+REPLACE_STDIO_WRITE_FUNCS = @REPLACE_STDIO_WRITE_FUNCS@
+REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
+REPLACE_STRDUP = @REPLACE_STRDUP@
+REPLACE_STRERROR = @REPLACE_STRERROR@
+REPLACE_STRPTIME = @REPLACE_STRPTIME@
+REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
+REPLACE_STRSTR = @REPLACE_STRSTR@
+REPLACE_STRTOD = @REPLACE_STRTOD@
+REPLACE_TIMEGM = @REPLACE_TIMEGM@
+REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
+REPLACE_VDPRINTF = @REPLACE_VDPRINTF@
+REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
+REPLACE_VPRINTF = @REPLACE_VPRINTF@
+REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
+REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
+REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
+REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
+REPLACE_WCTOB = @REPLACE_WCTOB@
+REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
+REPLACE_WRITE = @REPLACE_WRITE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
+SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
+STDARG_H = @STDARG_H@
+STDBOOL_H = @STDBOOL_H@
+STDINT_H = @STDINT_H@
+STRIP = @STRIP@
+SYSEXITS_H = @SYSEXITS_H@
+SYS_STAT_H = @SYS_STAT_H@
+SYS_TIME_H = @SYS_TIME_H@
+SYS_TIME_H_DEFINES_STRUCT_TIMESPEC = @SYS_TIME_H_DEFINES_STRUCT_TIMESPEC@
+TIME_H_DEFINES_STRUCT_TIMESPEC = @TIME_H_DEFINES_STRUCT_TIMESPEC@
+UINT32_MAX_LT_UINTMAX_MAX = @UINT32_MAX_LT_UINTMAX_MAX@
+UINT64_MAX_EQ_ULONG_MAX = @UINT64_MAX_EQ_ULONG_MAX@
+UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
 USE_NLS = @USE_NLS@
 VERSION = @VERSION@
+VOID_UNSETENV = @VOID_UNSETENV@
+WCHAR_H = @WCHAR_H@
+WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
+WCTYPE_H = @WCTYPE_H@
+WINT_T_SUFFIX = @WINT_T_SUFFIX@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
 YACC = @YACC@
-
-AUTOMAKE_OPTIONS = gnits dist-shar
-
-BABYL = rmail/* admin/*/RMAIL
-EXTRA_DIST = AC-PATCHES AM-PATCHES BI-PATCHES PORTS rebox.el
-SUBDIRS = doc lib intl src scripts po tests
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-CONFIG_HEADER_IN = config.h.in
-CONFIG_HEADER_FULL = config.h
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = 
-DIST_COMMON =  README ABOUT-NLS AUTHORS BACKLOG COPYING ChangeLog \
-INSTALL Makefile.am Makefile.in NEWS THANKS TODO acconfig.h \
-acinclude.m4 aclocal.m4 config.h.in configure configure.in install-sh \
-missing mkinstalldirs stamp-h.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP = --best
-default: all
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+gl_LIBOBJS = @gl_LIBOBJS@
+gl_LTLIBOBJS = @gl_LTLIBOBJS@
+gltests_LIBOBJS = @gltests_LIBOBJS@
+gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ACLOCAL_AMFLAGS = -I m4
+EXTRA_DIST = ChangeLog.1 Make.rules
+SUBDIRS = doc gnu lib rmt src scripts po tests
+gen_start_date = 2009-03-06
+prev_change_log = ChangeLog.CVS
+changelog_dir = .
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
 .SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnits Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(srcdir)/aclocal.m4:  configure.in  acinclude.m4
-	cd $(srcdir) && $(ACLOCAL)
-
-config.status: configure
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/Make.rules $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnits '; \
+	      cd $(srcdir) && $(AUTOMAKE) --gnits  \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits  Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnits  Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
 
-$(CONFIG_HEADER): stamp-h
-stamp-h: $(CONFIG_HEADER_IN) $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES= CONFIG_HEADERS=$(CONFIG_HEADER_FULL) \
-	     $(SHELL) ./config.status
-	@echo timestamp > stamp-h
-$(srcdir)/$(CONFIG_HEADER_IN): stamp-h.in
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
 	cd $(top_srcdir) && $(AUTOHEADER)
-	echo timestamp > $(srcdir)/stamp-h.in
-
-mostlyclean-hdr:
-
-clean-hdr:
+	rm -f stamp-h1
+	touch $@
 
 distclean-hdr:
-	rm -f $(CONFIG_HEADER)
-
-maintainer-clean-hdr:
+	-rm -f config.h stamp-h1
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -165,214 +769,425 @@ maintainer-clean-hdr:
 # (1) if the variable is set in `config.status', edit `config.status'
 #     (which will cause the Makefiles to be regenerated when you run `make');
 # (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive  \
-check-recursive installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@for subdir in $(SUBDIRS); do \
-	  target=`echo $@ | sed s/-recursive//`; \
+$(RECURSIVE_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
 	  echo "Making $$target in $$subdir"; \
-	  (cd $$subdir && $(MAKE) $$target) \
-	   || case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  (cd $$subdir && $(MAKE) tags); \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
 tags: TAGS
 
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES)
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
 	done; \
-	test -z "$(ETAGS_ARGS)config.h.in$(SOURCES)$(HEADERS)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $(SOURCES) $(HEADERS) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
 
 distclean-tags:
-	rm -f TAGS ID
-
-maintainer-clean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
-distdir = $(PACKAGE)-$(VERSION)
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	rm -rf $(distdir)
-	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz --mode=a+r
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --with-included-gettext --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) \
-	  && $(MAKE) dvi \
-	  && $(MAKE) check \
-	  && $(MAKE) install \
-	  && $(MAKE) installcheck \
-	  && $(MAKE) dist
-	rm -rf $(distdir)
-	@echo "========================"; \
-	echo "$(distdir).tar.gz is ready for distribution"; \
-	echo "========================"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz --mode=a+r $(distdir)
-	rm -rf $(distdir)
-dist-shar: distdir
-	-chmod -R a+r $(distdir)
-	rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz --mode=a+r $(distdir)
-	rm -rf $(distdir)
 distdir: $(DISTFILES)
-	@if sed 15q $(srcdir)/NEWS | fgrep -e "$(VERSION)" > /dev/null; then :; else \
+	@case `sed 15q $(srcdir)/NEWS` in \
+	*"$(VERSION)"*) : ;; \
+	*) \
 	  echo "NEWS not updated; not releasing" 1>&2; \
-	  exit 1; \
-	fi
-	rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 755 $(distdir)
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
-	  test -f $(distdir)/$$file \
-	  || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	  || cp -p $$d/$$file $(distdir)/$$file; \
+	  exit 1;; \
+	esac
+	$(am__remove_distdir)
+	test -d $(distdir) || mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
 	done
-	for subdir in $(SUBDIRS); do		\
-	  test -d $(distdir)/$$subdir		\
-	  || mkdir $(distdir)/$$subdir		\
-	  || exit 1;				\
-	  chmod 755 $(distdir)/$$subdir;	\
-	  (cd $$subdir && $(MAKE) distdir=../$(distdir)/$$subdir distdir) \
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
 	done
-info: info-recursive
-dvi: dvi-recursive
-check: all-am
-	$(MAKE) check-recursive
-installcheck: installcheck-recursive
-all-recursive-am: $(CONFIG_HEADER)
-	$(MAKE) all-recursive
-
-all-am: Makefile config.h all-local
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
 
-install-exec: install-exec-recursive
-	@$(NORMAL_INSTALL)
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
 
-install-data: install-data-recursive
-	@$(NORMAL_INSTALL)
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
 
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
 install: install-recursive
-	@:
-
+install-exec: install-exec-recursive
+install-data: install-data-recursive
 uninstall: uninstall-recursive
 
-all: all-recursive-am all-am
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 
+installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
-installdirs: installdirs-recursive
-
-
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
-	test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
 
 clean-generic:
-	test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
-	rm -f Makefile $(DISTCLEANFILES)
-	rm -f config.cache config.log stamp-h
-	test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
-	test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-	test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
 
-clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am
+clean-am: clean-generic mostlyclean-am
 
-distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr distclean-local \
+	distclean-tags
 
-maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
+dvi: dvi-recursive
 
-mostlyclean:  mostlyclean-recursive mostlyclean-am
+dvi-am:
 
-clean:  clean-recursive clean-am
+html: html-recursive
 
-distclean:  distclean-recursive distclean-am
-	rm -f config.status
+info: info-recursive
 
-maintainer-clean:  maintainer-clean-recursive maintainer-clean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	rm -f config.status
-
-.PHONY: default mostlyclean-hdr distclean-hdr clean-hdr \
-maintainer-clean-hdr install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info dvi \
-installcheck all-recursive-am all-am install-exec install-data install \
-uninstall all installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
-
-
-all-local: $(CONFIG_HEADER)
-
-id: ID
-
-ID:
-	cd lib && $(MAKE) $@
-	cd src && $(MAKE) $@
-
-dist-zoo: $(DISTFILES)
-	rm -rf $(distdir)
-	mkdir $(distdir)
-	distdir=`cd $(distdir) && pwd` \
-	  && cd $(srcdir) \
-	  && automake --include-deps --output-dir=$$distdir
-	@for file in $(DISTFILES); do		\
-	  test -f $(distdir)/$$file \
-	    || cp -p $(srcdir)/$$file $(distdir)/$$file; \
-	done
-	for subdir in $(SUBDIRS); do		\
-	  test -d $(distdir)/$$subdir		\
-	  || mkdir $(distdir)/$$subdir		\
-	  || exit 1;				\
-	  chmod 777 $(distdir)/$$subdir;	\
-	  (cd $$subdir && $(MAKE) dist) || exit 1; \
-	done
-	@sublist="$(DIST_SUBDIRS)";		\
-	for dir in $$sublist; do		\
-	  echo copying directory $$dir;		\
-	  tar -chf - $$dir | (cd $(distdir) && tar -xBpf -); \
-	done
-	chmod -R a+r $(distdir)
-	find $(distdir) -type f | xargs dosfn
-#	find $(distdir) -type f | xargs recode :ibmpc
-	mv $(distdir) $(PACKAGE)
-	find $(PACKAGE) -type f | zoo ahIq $(PACKAGE).zoo
-	rm -rf $(PACKAGE)
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-info: install-info-recursive
 
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+	install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-generic \
+	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+	dist-hook dist-lzma dist-shar dist-tarZ dist-zip distcheck \
+	distclean distclean-generic distclean-hdr distclean-local \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am
+
+
+dist-hook: 
+	$(MAKE) changelog_dir=$(distdir) make-ChangeLog
+	-rm -f $(distdir).cpio
+	find $(distdir) | cpio -Hcrc -o | \
+          GZIP=$(GZIP_ENV) gzip -c > $(distdir).cpio.gz
+
+distclean-local:
+	-rm -f $(distdir).cpio.gz
+
+.PHONY: ChangeLog
+ChangeLog: 
+	if test -d .git; then                                              \
+	  cmd=$(top_srcdir)/build-aux/gitlog-to-changelog;                 \
+	  if test -n "$(gen_start_date)"; then                             \
+	    cmd="$$cmd --since=\"$(gen_start_date)\"";                     \
+	  fi;                                                              \
+	  $$cmd |                                                          \
+            sed '/<unknown>$$/d' | fmt -s > $(changelog_dir)/cl-t;         \
+          if test -n "$(prev_change_log)" && test -f "$(prev_change_log)"; \
+	  then                                                             \
+	    cat "$(prev_change_log)" |                                     \
+	      sed '/^Local Variables:/,/^End:/d' >> $(changelog_dir)/cl-t; \
+	  fi;                                                              \
+	  echo "Local Variables:" >> $(changelog_dir)/cl-t;                \
+	  echo "mode: change-log" >> $(changelog_dir)/cl-t;                \
+	  echo "version-control: never"  >> $(changelog_dir)/cl-t;         \
+	  echo "buffer-read-only: t" >> $(changelog_dir)/cl-t;             \
+	  echo "End:" >> $(changelog_dir)/cl-t;                            \
+	  rm -f $(changelog_dir)/ChangeLog;                                \
+	  mv $(changelog_dir)/cl-t $(changelog_dir)/ChangeLog;             \
+	fi
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:

PORTS

@@ -1,173 +0,0 @@
-Ports of GNU tar and other tars		
-See the end of file for copying conditions.
-
-* Introduction
-
-  Most entries in this file are out of date, unfortunately. Such
-  entries are marked with an `X'. Run grep '^\*\*[^X]' PORTS to
-  extract valid entries.
-  
-  Please write bug-tar@gnu.org if you are aware of various ports of GNU tar
-  to non-GNU and non-Unix systems not listed here, or for corrections.
-  Please provide the goal system, a complete and stable URL, the maintainer
-  name and address, the tar version used as a base, and your comments.
-
-* GNU/Linux and Unix
-
-** Star is a tape archiver similar to tar.
-    <http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/star.html>
-
-* Amiga
-
-**X ftp://ftp.wustl.edu/systems/amiga/aminet/util/arc/GNUtar-1.11.8.lha
-    maintained by Enrico Forestieri <enrico@com.unipr.it>
-    Based on tar 1.11.8.
-
-**X ftp://ftp.ninemoons.com/pub/ade/current/amiga-bin/tar-1.11.8-bin.lha
-    maintained by the ADE group <fnf@fishpond.ninemoons.com>
-    Based on tar 1.11.8, needs ixemul.library.
-
-**X ftp://ftp.wustl.edu/systems/amiga/aminet/util/arc/gnutar.lha
-    maintained by <mscheler@wuarchive.wustl.edu>
-
-* DEC alpha (NT)
-
-**X ftp://ftp.cdrom.com/.20/windows/archiver/tar.zip
-    maintained by Drew Bliss & Geoff Voelker
-
-* DEC VAX (VMS)
-
-**X http://www.lp.se/free/vmstar/
-    maintained by Richard Levitte <levitte@lp.se>
-    This is not GNU tar, but a separate implementation.
-
-**  maintained by William Bader <william@nscs.fast.net>
-    For V4.7.  Based on an old PDtar.  Requires compatible shared libraries
-    to run V5 or V6 executables.
-
-* IBM/PC (DV/X)
-
-**X ftp://qdeck.com/ (?)
-    maintained by David Ronis <ronis@gibbs.chem.mcgill.ca>
-    For Desqview/X.  Everything works besides compression.  Copy of hacked
-    sources available, some of DV/X's programmer's library also needed.
-
-* IBM/PC (MSDOS)
-
-**X http://www.simtel.net/simtel.net/
-    http://www.leo.org/pub/comp/platforms/pc/gnuish (Germany)
-    ftp://ftp.simtel.net/simtelnet/gnu
-    ftp://ftp.leo.org/pub/comp/platforms/pc/gnuish
-    maintained by Darrel Hankerson <hankedr@mail.auburn.edu>
-    You get many GNU tools, not only `tar'.  The GNUish project is described
-    in `gnuish_t.htm'.
-
-** The DJGPP development tools also include some `tar' utilities.
-
-**X ftp://ftp.mcs.com/mcsnet.users/les/dos-gnutar/
-    maintained by Leslie Mikesell <les@mcs.net>
-    Based on tar 1.11.2.  Support for SCSI (via ASPI) and network (rsh over
-    packet driver). No support for win95 long file names.
-
-**X ftp://ftp.wu-wien.ac.at/pub/src/PCmisc/aspi-tar/*
-    maintained by Christoph Splittgerber <chris@orion.sdata.de>
-    Based on tar 1.10.  Support for SCSI (via ASPI).
-
-**X ftp://wuarchive (?)
-    Several DOS version based on PDtar.  John Gilmore <gnu@toad.com> says
-    he has copies of several vintages saved.
-
-**X ftp://ftp.cdrom.com/.14/languages/ada/toolkit/msdos/gtar/gtar.exe
-    ftp://ftp.cdrom.com/.14/languages/ada/toolkit/msdos/gtar/gtar.taz
-    ftp://ftp.cdrom.com/.14/languages/ada/toolkit/msdos/gtar/gtar.zip
-
-**X ftp://ftp.cdrom.com/.4/os2/archiver/tar.zip
-    Based on PDtar.
-
-**X ftp://ftp.cdrom.com/.20/windows/archiver/tar.zip
-    maintained by Drew Bliss & Geoff Voelker
-    GNU tar for NT (intel and Alpha platforms).
-
-** ftp://garbo.uwasa.fi/pc/unix/untgz095.zip
-    maintained by Tillmann Steinbrecher <tst@darmstadt.netsurf.de>
-    The `untgz' program is a fast .tar or .tar.gz (.tgz) extractor.
-
-**X http://people.darmstadt.netsurf.de/tst/tar.htm
-    maintained by Tillmann Steinbrecher <tst@darmstadt.netsurf.de>
-    This is not a `tar' port, but an index of them.
-
-* IBM/PC (OS/2)
-
-**X http://www.leo.org/pub/comp/os/os2/leo/gnu/archiver/gtar254.zip
-    http://www.leo.org/pub/comp/os/os2/leo/gnu/archiver/gtak254.zip
-    maintained by Andreas Kaiser <Andreas.Kaiser@stuttgart.netsurf.de>
-    Version 2.54.  Based on tar 1.10.  The second archive contains SCSI
-    drivers (DAT streamers notably) and rmt-type programs.
-
-* IBM/PC (Win32: Windows 95, NT 3.5 or NT 4.0)
-
-**X ftp://ftp.cygnus.com:~ftp/pub/sac/win32/usersrc/*
-    maintained by Cygnus
-    GNU-Win32 B17.1 distribution.  Download all files, `cat' them together,
-    and `untar' the result.  You get many GNU tools, not only `tar'.
-    Based on tar 1.11.2.
-
-**X ftp://ftp.cdrom.com/.20/windows/archiver/tar.zip
-    maintained by Drew Bliss & Geoff Voelker
-    GNU tar for NT (intel and Alpha platforms).
-
-** ftp://garbo.uwasa.fi/pc/unix/untgz095.zip
-    maintained by Tillmann Steinbrecher <tst@darmstadt.netsurf.de>
-    The `untgz' program is a fast .tar or .tar.gz (.tgz) extractor.
-
-* IBM/PC (Windows 3.1)
-
-**X ftp://ftp.mcs.com/mcsnet.users/les/win-gnutar/
-    maintained by Leslie Mikesell <les@mcs.net>
-    Support for network (rsh over winsock).  No support for win95 long
-    file names.
-
-**X ftp://ftp.gamesdomain.ru/.1/os/windows/programr/tar.zip
-    Based on GNU tar 1.11.2.
-
-* Macintosh
-
-** Paulo Abreu (paulotex at yahoo dot com) did a
-   limited port of GNU tar to Darwin, with support for resource forks
-   and finder info, but this no longer seems to be available.
-
-** There is a tar in Stuffit Expander which is available many places and
-   comes with MacOS.  It creates some spurious files but works on average.
-
-** There is an excellent GNU tar bundled in Tenon MachTen, but it does not
-   seem to be available separately.
-
-
-* Copyright notice
-
-  Copyright (C) 1999, 2001, 2003, 2004, 2007 Free Software Foundation, Inc.
-
-  This file is part of GNU tar.
-
-  GNU tar is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 3, or (at your option)
-  any later version.
-
-  GNU tar is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with GNU tar; see the file COPYING.  If not, write to
-  the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-  Boston, MA 02110-1301, USA.
-
-
-Local Variables:
-mode: outline
-paragraph-separate: "[	]*$"
-version-control: never
-End:
-  

README-cvs

@@ -1,70 +0,0 @@
--*- outline -*-
-
-These notes intend to help people working on the CVS version of
-this package.
-
-* Requirements
-
-Only the sources are installed in the CVS repository (to ease the
-maintenance, merges etc.), therefore you will have to get the latest
-stable versions of the maintainer tools we depend upon, including:
-
-- Automake <http://www.gnu.org/software/automake/>
-- Autoconf <http://www.gnu.org/software/autoconf/>
-- Bison <http://www.gnu.org/software/bison/>
-- Gettext <http://www.gnu.org/software/gettext/>
-- Gzip <http://www.gnu.org/software/gzip/>
-- Tar <http://www.gnu.org/software/tar/>
-- Wget <http://www.gnu.org/software/wget/>
-
-As of this writing, the latest stable version of Gzip is 1.2.4 but we
-suggest using test version 1.3.5 (or later, if one becomes available).
-
-Valgrind <http://valgrind.org/> is also highly recommended, if
-Valgrind supports your architecture.
-
-Only building the initial full source tree will be a bit painful,
-later, a plain `cvs update -P && make' should be sufficient.
-
-* First CVS checkout
-
-Obviously, if you are reading these notes, you did manage to check out
-this package from CVS.  The next step is to get other files needed to
-build, which are extracted from other source packages:
-
-	$ ./bootstrap
-
-And there you are!  Just
-
-	$ ./configure
-	$ make
-	$ make check
-
-At this point, there should be no difference between your local copy,
-and the CVS master copy:
-
-	$ cvs diff
-
-should output no difference.
-
-Enjoy!
-
------
-
-Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation,
-Inc.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 3, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-02110-1301, USA.

README-hacking

@@ -0,0 +1,71 @@
+These notes intend to help people working on the Git version of
+this package.
+
+* Requirements
+
+You need the following packages to build the Git version of GNU
+tar.  We do not make any efforts to accommodate older versions of
+these packages, so please make sure that you have the latest stable
+version. 
+
+- Automake <http://www.gnu.org/software/automake/>
+- Autoconf <http://www.gnu.org/software/autoconf/>
+- M4 <http://www.gnu.org/software/m4/>
+- Texinfo <http://www.gnu.org/software/texinfo>
+- Gnulib <http://www.gnu.org/software/gnulib> 
+- Git <http://git.or.cz>
+
+* Bootstrapping
+
+Obviously, if you are reading these notes, you did manage to clone
+tar from Git. The next step is to get other files needed to build,
+which are extracted from other source packages: 
+
+1. Change to the source tree directory
+
+   cd tar
+
+2. Run
+
+   ./bootstrap 
+
+Once done, proceed as described in the file README (section
+INSTALLATION).
+
+Normally you will have to run bootstrap only once. However, if you
+intend to hack on GNU tar, you might need to run it again later. In
+this case, you will probably want to save some time and bandwidth by
+avoiding downloading the same files again. If so, create in GNU tar
+root directory the file named `.bootstrap' with the following
+contents:
+
+   --gnulib-srcdir=$HOME/gnulib
+
+Replace `$HOME/gnulib' with the actual directory where the Gnulib
+sources reside.
+   
+For more information about `bootstrap', run `bootstrap --help'.
+
+
+* Copyright information
+
+ Copyright (C) 2007, 2008, 2009 Free Software Foundation, Inc.
+
+ Permission is granted to anyone to make or distribute verbatim copies
+ of this document as received, in any medium, provided that the
+ copyright notice and this permission notice are preserved,
+ thus giving the recipient permission to redistribute in turn.
+
+ Permission is granted to distribute modified versions
+ of this document, or of portions of it,
+ under the above conditions, provided also that they
+ carry prominent notices stating who last changed them.
+
+^L
+Local Variables:
+mode: outline
+paragraph-separate: "[	^L]*$"
+version-control: never
+End:
+
+

acconfig.h

@@ -1,88 +0,0 @@
-/* Special definitions for GNU tar, processed by autoheader.
-   Copyright © 1994, 1997 Free Software Foundation, Inc.
-   François Pinard <pinard@iro.umontreal.ca>, 1993.
-*/
-
-/* This is unconditionally defined for setting a GNU environment.  */
-#undef _GNU_SOURCE
-
-/* Define to a string giving the full name of the default archive file.  */
-#undef DEFAULT_ARCHIVE
-
-/* Define to a number giving the default blocking size for archives.  */
-#undef DEFAULT_BLOCKING
-
-/* Define to 1 if density may be indicated by [lmh] at end of device.  */
-#undef DENSITY_LETTER
-
-/* Define to a string giving the prefix of the default device, without the
-   part specifying the unit and density.  */
-#undef DEVICE_PREFIX
-
-/* Define to 1 if you lack a 3-argument version of open, and want to
-   emulate it with system calls you do have.  */
-#undef EMUL_OPEN3
-
-/* Define to 1 if NLS is requested.  */
-#undef ENABLE_NLS
-
-/* Define as 1 if you have catgets and don't want to use GNU gettext.  */
-#undef HAVE_CATGETS
-
-/* Define to 1 if you have getgrgid(3).  */
-#undef HAVE_GETGRGID
-
-/* Define to 1 if you have getpwuid(3).  */
-#undef HAVE_GETPWUID
-
-/* Define as 1 if you have gettext and don't want to use GNU gettext.  */
-#undef HAVE_GETTEXT
-
-/* Define if your locale.h file contains LC_MESSAGES.  */
-#undef HAVE_LC_MESSAGES
-
-/* Define to 1 if you have the valloc function.  */
-#undef HAVE_VALLOC
-
-/* Define to 1 if some rsh exists, or if you have <netdb.h>.  */
-#undef HAVE_RTAPELIB
-
-/* Define to 1 if mknod function is available.  */
-#undef HAVE_MKNOD
-
-/* Define to 1 if stpcpy function is available.  */
-#undef HAVE_STPCPY
-
-/* Define if `union wait' is the type of the first arg to wait functions.  */
-#undef HAVE_UNION_WAIT
-
-/* Define to 1 if utime.h exists and declares struct utimbuf.  */
-#undef HAVE_UTIME_H
-
-/* Define to mt_model (v.g., for DG/UX), else to mt_type.  */
-#undef MTIO_CHECK_FIELD
-
-/* Define to the name of the distribution.  */
-#undef PACKAGE
-
-/* Define to 1 if ANSI function prototypes are usable.  */
-#undef PROTOTYPES
-
-/* Define to the full path of your rsh, if any.  */
-#undef REMOTE_SHELL
-
-/* Path to directory containing system wide message catalog sources.  */
-#undef STD_INC_PATH
-
-/* Define to the version of the distribution.  */
-#undef VERSION
-
-/* Define to 1 if using the `glocale' package for message catalogs.  */
-#undef WITH_CATALOGS
-
-/* Define to 1 for better use of the debugging malloc library.  See
-   site ftp.antaire.com in antaire/src, file dmalloc/dmalloc.tar.gz.  */
-#undef WITH_DMALLOC
-
-/* Define to 1 if GNU regex should be used instead of GNU rx.  */
-#undef WITH_REGEX

acinclude.m4

@@ -1,425 +0,0 @@
-## ----------------------------------------- ##
-## Find how to suppress newlines with echo.  ##
-## ----------------------------------------- ##
-
-# Once this macro is called, you may output with no echo in a Makefile or
-# script using:  echo @ECHO_N@ "STRING_TO_OUTPUT@ECHO_C@".
-
-AC_DEFUN(fp_PROG_ECHO,
-[AC_MSG_CHECKING(how to suppress newlines using echo)
-AC_CACHE_VAL(fp_cv_prog_echo_nonl,
-[if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    fp_cv_prog_echo_nonl=no
-  else
-    fp_cv_prog_echo_nonl=option
-  fi
-else
-  fp_cv_prog_echo_nonl=escape
-fi
-])
-AC_MSG_RESULT($fp_cv_prog_echo_nonl)
-case $fp_cv_prog_echo_nonl in
-  no) ECHO_N= ECHO_C= ;;
-  option) ECHO_N=-n ECHO_C= ;;
-  escape) ECHO_N= ECHO_C='\c' ;;
-esac
-AC_SUBST(ECHO_N)dnl
-AC_SUBST(ECHO_C)dnl
-])
-
-## ------------------------------------------- ##
-## Check if --with-included-malloc was given.  ##
-## From Franc,ois Pinard                       ##
-## ------------------------------------------- ##
-
-# In 1992, Michael Bushnell (now Thomas Bushnell <thomas@gnu.ai.mit.edu>)
-# devised a test for avoiding HP/UX malloc and using GNU malloc instead.
-# Bruno Haible <haible@ma2s2.mathematik.uni-karlsruhe.de> recycled this
-# test for CLISP Common LISP and extended it to cover broken mallocs from
-# Sun and SGI.  I (<pinard@iro.umontreal.ca>) reworked it a little so
-# it is independent of config.guess, and overridable by the installer.
-
-# On IRIX 5.2, libc malloc is broken, but the -lmalloc one was usable.
-# So in my packages, I once unconditionally used -lmalloc if it existed.
-# This does not do anymore, because the -lmalloc malloc is broken on
-# Solaris 2.4 to 2.5.1 (alignment is 4 bytes instead of 8 bytes, as
-# reported by John Wells <john@bitsmart.com>).
-
-# Bruno also notes: "HP-UX has two different malloc() implementations.
-# Both are broken.  When used with CLISP, the one in the default libc.a
-# leads to a SIGSEGV, the one in libmalloc.a leads to a SIGBUS.  The SunOS
-# 4.1.1 malloc() breaks when used by CLISP's generational GC.  The IRIX
-# 5.2 malloc() breaks when used by CLISP's generational GC."
-
-# If the installer does not give a preference, we use the included GNU
-# malloc if we have the slightest doubt that malloc could be broken, this
-# includes cross compilation, and *all* HP/UX, SunOS or IRIX systems.
-# It is crude indeed, but I just do not have enough information for truly
-# benchmarking malloc in all cases, but want safe packages nevertheless.
-
-AC_DEFUN(fp_WITH_INCLUDED_MALLOC,
-[AC_MSG_CHECKING(if included GNU malloc is wanted)
-AC_ARG_WITH(included-malloc,
-[  --with-included-malloc  use the GNU malloc which is included here], ,
-[if test $cross_compiling = yes; then
-  withval=yes
-else
-  case `uname -s 2> /dev/null` in
-    HP-UX | SunOS | IRIX* ) withval=yes ;;
-    *) withval=no ;;
-  esac
-fi])
-test "$withval" = yes && LIBOBJS="$LIBOBJS gmalloc.o"
-AC_MSG_RESULT($withval)
-])
-
-## -------------------- ##
-## Macros from Ulrich.  ##
-## -------------------- ##
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-# serial 1
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
-  /*)
-  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in ifelse([$5], , $PATH, [$5]); do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if [$3]; then
-	ac_cv_path_$1="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
-  ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
-  AC_MSG_RESULT([$]$1)
-else
-  AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
-  [if test $ac_cv_header_locale_h = yes; then
-    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-    if test $am_cv_val_LC_MESSAGES = yes; then
-      AC_DEFINE(HAVE_LC_MESSAGES)
-    fi
-  fi])
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 1
-
-AC_DEFUN(AM_WITH_NLS,
-  [AC_MSG_CHECKING([whether NLS is requested])
-    dnl Default is enabled NLS
-    AC_ARG_ENABLE(nls,
-      [  --disable-nls           do not use Native Language Support],
-      USE_NLS=$enableval, USE_NLS=yes)
-    AC_MSG_RESULT($USE_NLS)
-    AC_SUBST(USE_NLS)
-
-    USE_INCLUDED_LIBINTL=no
-
-    dnl If we use NLS figure out what method
-    if test "$USE_NLS" = "yes"; then
-      AC_DEFINE(ENABLE_NLS)
-      AC_MSG_CHECKING([whether included gettext is requested])
-      AC_ARG_WITH(included-gettext,
-        [  --with-included-gettext use the GNU gettext library included here],
-        nls_cv_force_use_gnu_gettext=$withval,
-        nls_cv_force_use_gnu_gettext=no)
-      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-
-      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
-      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
-        dnl User does not insist on using GNU NLS library.  Figure out what
-        dnl to use.  If gettext or catgets are available (in this order) we
-        dnl use this.  Else we have to fall back to GNU NLS library.
-	dnl catgets is only used if permitted by option --with-catgets.
-	nls_cv_header_intl=
-	nls_cv_header_libgt=
-	CATOBJEXT=NONE
-
-	AC_CHECK_HEADER(libintl.h,
-	  [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
-	    [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
-	       gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
-
-	   if test "$gt_cv_func_gettext_libc" != "yes"; then
-	     AC_CHECK_LIB(intl, bindtextdomain,
-	       [AC_CACHE_CHECK([for gettext in libintl],
-		 gt_cv_func_gettext_libintl,
-		 [AC_TRY_LINK([], [return (int) gettext ("")],
-		 gt_cv_func_gettext_libintl=yes,
-		 gt_cv_func_gettext_libintl=no)])])
-	   fi
-
-	   if test "$gt_cv_func_gettext_libc" = "yes" \
-	      || test "$gt_cv_func_gettext_libintl" = "yes"; then
-	      AC_DEFINE(HAVE_GETTEXT)
-	      AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
-	      if test "$MSGFMT" != "no"; then
-		AC_CHECK_FUNCS(dcgettext)
-		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-		AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
-			       return _nl_msg_cat_cntr],
-		  [CATOBJEXT=.gmo
-		   DATADIRNAME=share],
-		  [CATOBJEXT=.mo
-		   DATADIRNAME=lib])
-		INSTOBJEXT=.mo
-	      fi
-	    fi
-	])
-
-        if test "$CATOBJEXT" = "NONE"; then
-	  AC_MSG_CHECKING([whether catgets can be used])
-	  AC_ARG_WITH(catgets,
-	    [  --with-catgets          use catgets functions if available],
-	    nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
-	  AC_MSG_RESULT($nls_cv_use_catgets)
-
-	  if test "$nls_cv_use_catgets" = "yes"; then
-	    dnl No gettext in C library.  Try catgets next.
-	    AC_CHECK_LIB(i, main)
-	    AC_CHECK_FUNC(catgets,
-	      [AC_DEFINE(HAVE_CATGETS)
-	       INTLOBJS="\$(CATOBJS)"
-	       AC_PATH_PROG(GENCAT, gencat, no)dnl
-	       if test "$GENCAT" != "no"; then
-		 AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
-		 if test "$GMSGFMT" = "no"; then
-		   AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
-		    [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
-		 fi
-		 AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-		   [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-		 USE_INCLUDED_LIBINTL=yes
-		 CATOBJEXT=.cat
-		 INSTOBJEXT=.cat
-		 DATADIRNAME=lib
-		 INTLDEPS="../intl/libintl.a"
-		 INTLLIBS=$INTLDEPS
-		 LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-		 nls_cv_header_intl=intl/libintl.h
-		 nls_cv_header_libgt=intl/libgettext.h
-	       fi])
-	  fi
-        fi
-
-        if test "$CATOBJEXT" = "NONE"; then
-	  dnl Neither gettext nor catgets in included in the C library.
-	  dnl Fall back on GNU gettext library.
-	  nls_cv_use_gnu_gettext=yes
-        fi
-      fi
-
-      if test "$nls_cv_use_gnu_gettext" = "yes"; then
-        dnl Mark actions used to generate GNU NLS library.
-        INTLOBJS="\$(GETTOBJS)"
-        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
-        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-        AC_SUBST(MSGFMT)
-	USE_INCLUDED_LIBINTL=yes
-        CATOBJEXT=.gmo
-        INSTOBJEXT=.mo
-        DATADIRNAME=share
-	INTLDEPS="../intl/libintl.a"
-	INTLLIBS=$INTLDEPS
-	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-        nls_cv_header_intl=intl/libintl.h
-        nls_cv_header_libgt=intl/libgettext.h
-      fi
-
-      dnl Test whether we really found GNU xgettext.
-      if test "$XGETTEXT" != ":"; then
-	dnl If it is no GNU xgettext we define it as : so that the
-	dnl Makefiles still can work.
-	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
-	  : ;
-	else
-	  AC_MSG_RESULT(
-	    [found xgettext programs is not GNU xgettext; ignore it])
-	  XGETTEXT=":"
-	fi
-      fi
-
-      # We need to process the po/ directory.
-      POSUB=po
-    else
-      DATADIRNAME=share
-      nls_cv_header_intl=intl/libintl.h
-      nls_cv_header_libgt=intl/libgettext.h
-    fi
-
-    # If this is used in GNU gettext we have to set USE_NLS to `yes'
-    # because some of the sources are only built for this goal.
-    if test "$PACKAGE" = gettext; then
-      USE_NLS=yes
-      USE_INCLUDED_LIBINTL=yes
-    fi
-
-    dnl These rules are solely for the distribution goal.  While doing this
-    dnl we only have to keep exactly one list of the available catalogs
-    dnl in configure.in.
-    for lang in $ALL_LINGUAS; do
-      GMOFILES="$GMOFILES $lang.gmo"
-      POFILES="$POFILES $lang.po"
-    done
-
-    dnl Make all variables we use known to autoconf.
-    AC_SUBST(USE_INCLUDED_LIBINTL)
-    AC_SUBST(CATALOGS)
-    AC_SUBST(CATOBJEXT)
-    AC_SUBST(DATADIRNAME)
-    AC_SUBST(GMOFILES)
-    AC_SUBST(INSTOBJEXT)
-    AC_SUBST(INTLDEPS)
-    AC_SUBST(INTLLIBS)
-    AC_SUBST(INTLOBJS)
-    AC_SUBST(POFILES)
-    AC_SUBST(POSUB)
-  ])
-
-AC_DEFUN(AM_GNU_GETTEXT,
-  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-   AC_REQUIRE([AC_PROG_CC])dnl
-   AC_REQUIRE([AC_ISC_POSIX])dnl
-   AC_REQUIRE([AC_PROG_RANLIB])dnl
-   AC_REQUIRE([AC_HEADER_STDC])dnl
-   AC_REQUIRE([AC_C_CONST])dnl
-   AC_REQUIRE([AC_C_INLINE])dnl
-   AC_REQUIRE([AC_TYPE_OFF_T])dnl
-   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
-   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
-   AC_REQUIRE([AC_FUNC_MMAP])dnl
-
-   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h values.h])
-   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-__argz_count __argz_stringify __argz_next])
-
-   if test "${ac_cv_func_stpcpy+set}" != "set"; then
-     AC_CHECK_FUNCS(stpcpy)
-   fi
-   if test "${ac_cv_func_stpcpy}" = "yes"; then
-     AC_DEFINE(HAVE_STPCPY)
-   fi
-
-   AM_LC_MESSAGES
-   AM_WITH_NLS
-
-   if test "x$CATOBJEXT" != "x"; then
-     if test "x$ALL_LINGUAS" = "x"; then
-       LINGUAS=
-     else
-       AC_MSG_CHECKING(for catalogs to be installed)
-       NEW_LINGUAS=
-       for lang in ${LINGUAS=$ALL_LINGUAS}; do
-         case "$ALL_LINGUAS" in
-          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
-         esac
-       done
-       LINGUAS=$NEW_LINGUAS
-       AC_MSG_RESULT($LINGUAS)
-     fi
-
-     dnl Construct list of names of catalog files to be constructed.
-     if test -n "$LINGUAS"; then
-       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
-     fi
-   fi
-
-   dnl Determine which catalog format we have (if any is needed)
-   dnl For now we know about two different formats:
-   dnl   Linux libc-5 and the normal X/Open format
-   test -d intl || mkdir intl
-   if test "$CATOBJEXT" = ".cat"; then
-     AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
-     dnl Transform the SED scripts while copying because some dumb SEDs
-     dnl cannot handle comments.
-     sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
-   fi
-   dnl po2tbl.sed is always needed.
-   sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
-     $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
-
-   dnl In the intl/Makefile.in we have a special dependency which makes
-   dnl only sense for gettext.  We comment this out for non-gettext
-   dnl packages.
-   if test "$PACKAGE" = "gettext"; then
-     GT_NO="#NO#"
-     GT_YES=
-   else
-     GT_NO=
-     GT_YES="#YES#"
-   fi
-   AC_SUBST(GT_NO)
-   AC_SUBST(GT_YES)
-
-   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
-   dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
-   dnl Try to locate is.
-   MKINSTALLDIRS=
-   if test $ac_aux_dir; then
-     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
-   fi
-   if test -z $MKINSTALLDIRS; then
-     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
-   fi
-   AC_SUBST(MKINSTALLDIRS)
-
-   dnl Generate list of files to be processed by xgettext which will
-   dnl be included in po/Makefile.
-   test -d po || mkdir po
-   if test "x$srcdir" != "x."; then
-     if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
-       posrcprefix="$srcdir/"
-     else
-       posrcprefix="../$srcdir/"
-     fi
-   else
-     posrcprefix="../"
-   fi
-   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
-	< $srcdir/po/POTFILES.in > po/POTFILES
-  ])

bootstrap

@@ -1,13 +1,13 @@
 #! /bin/sh
 
-# Bootstrap this package from CVS.
+# Bootstrap this package from checked-out sources.
 
-# Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+# Copyright (C) 2003-2008, 2009 Free Software Foundation, Inc.
 
-# This program is free software; you can redistribute it and/or modify
+# This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
 
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -15,9 +15,7 @@
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # Written by Paul Eggert and Sergey Poznyakoff.
 
@@ -25,10 +23,16 @@ nl='
 '
 
 # Ensure file names are sorted consistently across platforms.
-# Also, ensure diagnostics are in English, e.g., "wget --help" below.
 LC_ALL=C
 export LC_ALL
 
+local_gl_dir=gl
+
+# Temporary directory names.
+bt='._bootmp'
+bt_regex=`echo "$bt"| sed 's/\./[.]/g'`
+bt2=${bt}2
+
 usage() {
   echo >&2 "\
 Usage: $0 [OPTION]...
@@ -43,73 +47,25 @@ Options:
  --gnulib-srcdir=DIRNAME  Specify the local directory where gnulib
                           sources reside.  Use this if you already
                           have gnulib sources on your machine, and
-                          do not want to waste your bandwidth dowloading
+                          do not want to waste your bandwidth downloading
                           them again.
  --copy                   Copy files instead of creating symbolic links.
  --force                  Attempt to bootstrap even if the sources seem
                           not to have been checked out.
  --skip-po                Do not download po files.
- --update-po              Update po files and exit.
- --cvs-user=USERNAME      Set the CVS username to be used when accessing
-                          the paxutils repository.
 
-If the file bootstrap.conf exists in the current working directory, its
+If the file $0.conf exists in the same directory as this script, its
 contents are read as shell variables to configure the bootstrap.
 
-Local defaults can be provided by placing the file \`.bootstrap' in the
-current working directory.  The file is read after bootstrap.conf, comments
-and empty lines are removed, shell variables expanded and the result is
-prepended to the command line options. 
-
 Running without arguments will suffice in most cases.
 "
 }
 
-checkout() {
-  if [ ! -d $1 ]; then
-    echo "$0: getting $1 files..."
-
-    case $1 in
-    paxutils)
-      case ${CVS_AUTH-pserver} in
-      pserver)
-        CVS_PREFIX=':pserver:anonymous@';;
-      ssh)
-        CVS_PREFIX="$CVS_USER${CVS_USER+@}";;
-      *)
-        echo "$0: $CVS_AUTH: Unknown CVS access method" >&2
-        exit 1;;
-      esac
-
-      case $CVS_RSH in
-      '') CVS_RSH=ssh; export CVS_RSH;;
-      esac
-
-      CVSURL=${CVS_PREFIX}cvs.savannah.gnu.org:/cvsroot/"$1"
-      ;;
-      
-    gnulib)
-      CVSURL=:pserver:anonymous@pserver.git.sv.gnu.org:/gnulib.git
-      ;;
-      
-    esac
-
-    trap "cleanup $1" 1 2 13 15
-
-    cvs -z3 -q -d $CVSURL co $1 || cleanup $1
-
-    trap - 1 2 13 15
-  fi
-}
-
-cleanup() {
-  status=$?
-  rm -fr $1
-  exit $status
-}
-
 # Configuration.
 
+# Name of the Makefile.am
+gnulib_mk=gnulib.mk
+
 # List of gnulib modules needed.
 gnulib_modules=
 
@@ -126,9 +82,10 @@ po_download_command_format=\
 
 extract_package_name='
   /^AC_INIT(/{
-     /.*,.*,.*,/{
+     /.*,.*,.*, */{
        s///
        s/[][]//g
+       s/)$//
        p
        q
      }
@@ -141,19 +98,28 @@ extract_package_name='
   }
 '
 package=`sed -n "$extract_package_name" configure.ac` || exit
+gnulib_name=lib$package
+
+build_aux=build-aux
+source_base=lib
+m4_base=m4
+doc_base=doc
+tests_base=tests
 
 # Extra files from gnulib, which override files from other sources.
-gnulib_extra_files='
-	build-aux/announce-gen
-	build-aux/install-sh
-	build-aux/missing
-	build-aux/mdate-sh
-	build-aux/texinfo.tex
-	build-aux/depcomp
-	build-aux/config.guess
-	build-aux/config.sub
+gnulib_extra_files="
+	$build_aux/install-sh
+	$build_aux/missing
+	$build_aux/mdate-sh
+	$build_aux/texinfo.tex
+	$build_aux/depcomp
+	$build_aux/config.guess
+	$build_aux/config.sub
 	doc/INSTALL
-'
+"
+
+# Additional gnulib-tool options to use.  Use "\newline" to break lines.
+gnulib_tool_option_extras=
 
 # Other locale categories that need message catalogs.
 EXTRA_LOCALE_CATEGORIES=
@@ -165,23 +131,38 @@ XGETTEXT_OPTIONS='\\\
  --flag=error:3:c-format --flag=error_at_line:5:c-format\\\
 '
 
+# Package bug report address for gettext files
+MSGID_BUGS_ADDRESS=bug-$package@gnu.org
+
 # Files we don't want to import.
 excluded_files=
 
 # File that should exist in the top directory of a checked out hierarchy,
 # but not in a distribution tarball.
-CVS_only_file=README-cvs
+checkout_only_file=README-hacking
 
 # Whether to use copies instead of symlinks.
 copy=false
 
+# Set this to '.cvsignore .gitignore' in bootstrap.conf if you want
+# those files to be generated in directories like lib/, m4/, and po/.
+# Or set it to 'auto' to make this script select which to use based
+# on which version control system (if any) is used in the source directory.
+vc_ignore=auto
+
 # Override the default configuration, if necessary.
-test -r bootstrap.conf && . ./bootstrap.conf
+# Make sure that bootstrap.conf is sourced from the current directory
+# if we were invoked as "sh bootstrap".
+case "$0" in
+  */*) test -r "$0.conf" && . "$0.conf" ;;
+  *) test -r "$0.conf" && . ./"$0.conf" ;;
+esac
+
 
-# Read local configuration file
-if [ -r .bootstrap ]; then
-  echo "$0: Reading configuration file .bootstrap"
-  eval set -- "`sed 's/#.*$//;/^$/d' .bootstrap | tr '\n' ' '` $*"
+if test "$vc_ignore" = auto; then
+  vc_ignore=
+  test -d .git && vc_ignore=.gitignore
+  test -d CVS && vc_ignore="$vc_ignore .cvsignore"
 fi
 
 # Translate configuration into internal form.
@@ -194,20 +175,14 @@ do
   --help)
     usage
     exit;;
+  --gnulib-srcdir=*)
+    GNULIB_SRCDIR=`expr "X$option" : 'X--gnulib-srcdir=\(.*\)'`;;
   --paxutils-srcdir=*)
     PAXUTILS_SRCDIR=`expr "$option" : '--paxutils-srcdir=\(.*\)'`;;
-  --gnulib-srcdir=*)
-    GNULIB_SRCDIR=`expr "$option" : '--gnulib-srcdir=\(.*\)'`;;
-  --cvs-user=*)
-    CVS_USER=`expr "$option" : '--cvs-user=\(.*\)'`;;
-  --skip-po | --no-po) # --no-po is for compatibility with 'tar' tradition.
-    DOWNLOAD_PO=skip;;
-  --update-po=*)
-    DOWNLOAD_PO=`expr "$option" : '--update-po=\(.*\)'`;;
-  --update-po)
-    DOWNLOAD_PO=only;;
+  --skip-po)
+    SKIP_PO=t;;
   --force)
-    CVS_only_file=;;
+    checkout_only_file=;;
   --copy)
     copy=true;;
   *)
@@ -216,12 +191,130 @@ do
   esac
 done
 
-if test -n "$CVS_only_file" && test ! -r "$CVS_only_file"; then
+if test -n "$checkout_only_file" && test ! -r "$checkout_only_file"; then
   echo "$0: Bootstrapping from a non-checked-out distribution is risky." >&2
   exit 1
 fi
 
-echo "$0: Bootstrapping CVS $package..."
+# If $STR is not already on a line by itself in $FILE, insert it,
+# sorting the new contents of the file and replacing $FILE with the result.
+insert_sorted_if_absent() {
+  file=$1
+  str=$2
+  test -f $file || touch $file
+  echo "$str" | sort -u - $file | cmp -s - $file \
+    || echo "$str" | sort -u - $file -o $file \
+    || exit 1
+}
+
+# Die if there is no AC_CONFIG_AUX_DIR($build_aux) line in configure.ac.
+found_aux_dir=no
+grep '^[	 ]*AC_CONFIG_AUX_DIR(\['"$build_aux"'\])' configure.ac \
+    >/dev/null && found_aux_dir=yes
+grep '^[	 ]*AC_CONFIG_AUX_DIR('"$build_aux"')' configure.ac \
+    >/dev/null && found_aux_dir=yes
+if test $found_aux_dir = no; then
+  echo "$0: expected line not found in configure.ac. Add the following:" >&2
+  echo "  AC_CONFIG_AUX_DIR([$build_aux])" >&2
+  exit 1
+fi
+
+# If $build_aux doesn't exist, create it now, otherwise some bits
+# below will malfunction.  If creating it, also mark it as ignored.
+if test ! -d $build_aux; then
+  mkdir $build_aux
+  for dot_ig in x $vc_ignore; do
+    test $dot_ig = x && continue
+    insert_sorted_if_absent $dot_ig $build_aux
+  done
+fi
+
+echo "$0: Bootstrapping from checked-out $package sources..."
+
+# See if we can use gnulib's git-merge-changelog merge driver.
+if test -d .git && (git --version) >/dev/null 2>/dev/null ; then
+  if git config merge.merge-changelog.driver >/dev/null ; then
+    :
+  elif (git-merge-changelog --version) >/dev/null 2>/dev/null ; then
+    echo "initializing git-merge-changelog driver"
+    git config merge.merge-changelog.name 'GNU-style ChangeLog merge driver'
+    git config merge.merge-changelog.driver 'git-merge-changelog %O %A %B'
+  else
+    echo "consider installing git-merge-changelog from gnulib"
+  fi
+fi
+
+cleanup() {
+  status=$?
+  rm -fr $1
+  exit $status
+}
+
+git_modules_config () {
+  GIT_CONFIG_LOCAL=.gitmodules git config "$@"
+}
+
+# Get paxutils files.
+case ${PAXUTILS_SRCDIR--} in
+-) if [ ! -d paxutils ]; then
+     echo "$0: getting paxutils files..."
+
+     trap "cleanup paxutils" 1 2 13 15
+
+     git clone --depth 1 git://git.sv.gnu.org/paxutils || cleanup paxutils
+
+     trap - 1 2 13 15
+   fi
+   PAXUTILS_SRCDIR=paxutils
+   ;;
+esac
+
+if [ -r $PAXUTILS_SRCDIR/gnulib.modules ]; then
+  gnulib_modules=`
+    (echo "$gnulib_modules"; grep '^[^#]' $PAXUTILS_SRCDIR/gnulib.modules) |
+    sort -u
+  `
+fi
+
+# Get gnulib files.
+
+case ${GNULIB_SRCDIR--} in
+-)
+  if git_modules_config submodule.gnulib.url >/dev/null; then
+    echo "$0: getting gnulib files..."
+    git submodule init || exit $?
+    git submodule update || exit $?
+
+  elif [ ! -d gnulib ]; then
+    echo "$0: getting gnulib files..."
+
+    trap cleanup_gnulib 1 2 13 15
+
+    git clone --help|grep depth > /dev/null && shallow='--depth 2' || shallow=
+    git clone $shallow git://git.sv.gnu.org/gnulib ||
+      "cleanup $1"
+
+    trap - 1 2 13 15
+  fi
+  GNULIB_SRCDIR=gnulib
+  ;;
+*)
+  # Redirect the gnulib submodule to the directory on the command line
+  # if possible.
+  if test -d "$GNULIB_SRCDIR"/.git && \
+	git_modules_config submodule.gnulib.url >/dev/null; then
+    git submodule init
+    GNULIB_SRCDIR=`cd $GNULIB_SRCDIR && pwd`
+    git config --replace-all submodule.gnulib.url $GNULIB_SRCDIR
+    echo "$0: getting gnulib files..."
+    git submodule update || exit $?
+    GNULIB_SRCDIR=gnulib
+  fi
+  ;;
+esac
+
+gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
+<$gnulib_tool || exit
 
 # Get translations.
 
@@ -252,7 +345,7 @@ update_po_files() {
 
   langs=`cd $ref_po_dir && echo *.po|sed 's/\.po//g'`
   test "$langs" = '*' && langs=x
-  for po in `cd $ref_po_dir && echo *.po|sed 's/\.po//g'`; do
+  for po in $langs; do
     case $po in x) continue;; esac
     new_po="$ref_po_dir/$po.po"
     cksum_file="$ref_po_dir/$po.s1"
@@ -265,97 +358,41 @@ update_po_files() {
   done
 }
 
-case $DOWNLOAD_PO in
-'skip')
-  ;;
+case $SKIP_PO in
 '')
   if test -d po; then
     update_po_files po $package || exit
   fi
-  ;;
-'only')
-  if test -d po; then
-    update_po_files po $package || exit
-  fi
-  exit
-  ;;
-esac
 
-# Get paxutils files.
-
-case ${PAXUTILS_SRCDIR--} in
--) checkout paxutils
-   PAXUTILS_SRCDIR=paxutils
+  if test -d runtime-po; then
+    update_po_files runtime-po $package-runtime || exit
+  fi;;
 esac
 
-if [ -r $PAXUTILS_SRCDIR/gnulib.modules ]; then
-  gnulib_modules=`
-    (echo "$gnulib_modules"; grep '^[^#]' $PAXUTILS_SRCDIR/gnulib.modules) |
-    sort -u
-  `
-fi
-
-ignore_file_list=
-cleanup_ifl() {
-	test -n "$ignore_file_list" && rm -f $ignore_file_list
-}
-
-trap 'cleanup_ifl' 1 2 3 15
+symlink_to_dir()
+{
+  src=$1/$2
+  dst=${3-$2}
 
-# ignorefile DIR FILE 
-#  add FILE to the temporary ignorelist in the directory DIR
-ignorefile() {
-  file=$1/.ignore.$$ 
-  echo "$2" >> $file
-  if `echo $ignore_list | grep -qv $file`; then
-    ignore_file_list="$ignore_file_list
-$file"
-  fi
-}  
+  test -f "$src" && {
 
-# copy_files srcdir dstdir
-copy_files() {
-  for file in `cat $1/DISTFILES`
-  do
-    case $file in
-    "#*")  continue;;
-    esac
-    dst=`echo $file | sed 's^.*/^^'`
-    if [ $# -eq 3 ]; then
-      case $dst in
-      ${3}*) ;;
-      *) dst=${3}$dst;;
-      esac
+    # If the destination directory doesn't exist, create it.
+    # This is required at least for "lib/uniwidth/cjk.h".
+    dst_dir=`dirname "$dst"`
+    if ! test -d "$dst_dir"; then
+      mkdir -p "$dst_dir"
+
+      # If we've just created a directory like lib/uniwidth,
+      # tell version control system(s) it's ignorable.
+      # FIXME: for now, this does only one level
+      parent=`dirname "$dst_dir"`
+      for dot_ig in x $vc_ignore; do
+	test $dot_ig = x && continue
+	ig=$parent/$dot_ig
+	insert_sorted_if_absent $ig `echo "$dst_dir"|sed 's,.*/,,'`
+      done
     fi
-    echo "$0: Copying file $1/$file to $2/$dst"
-    cp -p $1/$file $2/$dst
-    ignorefile $2 $dst
-  done
-}
-
-# Get gnulib files.
-
-case ${GNULIB_SRCDIR--} in
--)
-  checkout gnulib
-  GNULIB_SRCDIR=gnulib
-esac
-
-gnulib_tool=$GNULIB_SRCDIR/gnulib-tool
-<$gnulib_tool || exit
-
-ensure_dir_exists()
-{
-  d=`dirname $dst`
-  test -d "$d" || mkdir -p -- "$d"
-}
-
-symlink_to_gnulib()
-{
-  src=$GNULIB_SRCDIR/$1
-  dst=${2-$1}
 
-  test -f "$src" && {
     if $copy; then
       {
 	test ! -h "$dst" || {
@@ -366,7 +403,6 @@ symlink_to_gnulib()
       test -f "$dst" &&
       cmp -s "$src" "$dst" || {
 	echo "$0: cp -fp $src $dst" &&
-	ensure_dir_exists $dst &&
 	cp -fp "$src" "$dst"
       }
     else
@@ -389,7 +425,6 @@ symlink_to_gnulib()
 	esac
 
 	echo "$0: ln -fs $dot_dots$src $dst" &&
-	ensure_dir_exists $dst &&
 	ln -fs "$dot_dots$src" "$dst"
       }
     fi
@@ -402,7 +437,9 @@ cp_mark_as_generated()
   cp_dst=$2
 
   if cmp -s "$cp_src" "$GNULIB_SRCDIR/$cp_dst"; then
-    symlink_to_gnulib "$cp_dst"
+    symlink_to_dir "$GNULIB_SRCDIR" "$cp_dst"
+  elif cmp -s "$cp_src" "$local_gl_dir/$cp_dst"; then
+    symlink_to_dir $local_gl_dir "$cp_dst"
   else
     case $cp_dst in
       *.[ch])             c1='/* '; c2=' */';;
@@ -411,10 +448,20 @@ cp_mark_as_generated()
       *)                  c1=     ; c2=     ;;
     esac
 
+    # If the destination directory doesn't exist, create it.
+    # This is required at least for "lib/uniwidth/cjk.h".
+    dst_dir=`dirname "$cp_dst"`
+    test -d "$dst_dir" || mkdir -p "$dst_dir"
+
     if test -z "$c1"; then
       cmp -s "$cp_src" "$cp_dst" || {
+	# Copy the file first to get proper permissions if it
+	# doesn't already exist.  Then overwrite the copy.
 	echo "$0: cp -f $cp_src $cp_dst" &&
-	cp -f "$cp_src" "$cp_dst"
+	rm -f "$cp_dst" &&
+	cp "$cp_src" "$cp_dst-t" &&
+	sed "s!$bt_regex/!!g" "$cp_src" > "$cp_dst-t" &&
+	mv -f "$cp_dst-t" "$cp_dst"
       }
     else
       # Copy the file first to get proper permissions if it
@@ -423,7 +470,7 @@ cp_mark_as_generated()
       (
 	echo "$c1-*- buffer-read-only: t -*- vi: set ro:$c2" &&
 	echo "${c1}DO NOT EDIT! GENERATED AUTOMATICALLY!$c2" &&
-	cat "$cp_src"
+	sed "s!$bt_regex/!!g" "$cp_src"
       ) > $cp_dst-t &&
       if cmp -s "$cp_dst-t" "$cp_dst"; then
 	rm -f "$cp_dst-t"
@@ -443,7 +490,9 @@ version_controlled_file() {
     grep -F "/$file/" $dir/CVS/Entries 2>/dev/null |
 	     grep '^/[^/]*/[0-9]' > /dev/null && found=yes
   elif test -d .git; then
-    git-rm -n "$dir/$file" > /dev/null 2>&1 && found=yes
+    git rm -n "$dir/$file" > /dev/null 2>&1 && found=yes
+  elif test -d .svn; then
+    svn log -r HEAD "$dir/$file" > /dev/null 2>&1 && found=yes
   else
     echo "$0: no version control for $dir/$file?" >&2
   fi
@@ -454,18 +503,22 @@ slurp() {
   for dir in . `(cd $1 && find * -type d -print)`; do
     copied=
     sep=
-    for file in `ls $1/$dir`; do
+    for file in `ls -a $1/$dir`; do
+      case $file in
+      .|..) continue;;
+      .*) continue;; # FIXME: should all file names starting with "." be ignored?
+      esac
       test -d $1/$dir/$file && continue
       for excluded_file in $excluded_files; do
 	test "$dir/$file" = "$excluded_file" && continue 2
       done
       if test $file = Makefile.am; then
-        copied=$copied${sep}gnulib.mk; sep=$nl
-	remove_intl='/^[^#].*\/intl/s/^/#/;'"s,/$bt,,g"
-        sed "$remove_intl" $1/$dir/$file | cmp -s - $dir/gnulib.mk || {
-	  echo "$0: Copying $1/$dir/$file to $dir/gnulib.mk ..." &&
-	  rm -f $dir/gnulib.mk &&
-	  sed "$remove_intl" $1/$dir/$file >$dir/gnulib.mk
+        copied=$copied${sep}$gnulib_mk; sep=$nl
+	remove_intl='/^[^#].*\/intl/s/^/#/;'"s!$bt_regex/!!g"
+        sed "$remove_intl" $1/$dir/$file | cmp -s - $dir/$gnulib_mk || {
+	  echo "$0: Copying $1/$dir/$file to $dir/$gnulib_mk ..." &&
+	  rm -f $dir/$gnulib_mk &&
+	  sed "$remove_intl" $1/$dir/$file >$dir/$gnulib_mk
 	}
       elif { test "${2+set}" = set && test -r $2/$dir/$file; } ||
 	   version_controlled_file $dir $file; then
@@ -489,98 +542,109 @@ slurp() {
       fi || exit
     done
 
-    if test -n "$copied"; then
-      copied="Makefile
-Makefile.in
-$copied"
-      if test -d CVS; then
-	dot_ig=.cvsignore
-      else
-        dor_ig=.gitignore
-      fi
-
+    for dot_ig in x $vc_ignore; do
+      test $dot_ig = x && continue
       ig=$dir/$dot_ig
-      if [ -f $dir/.ignore.$$ ]; then
-         tfile=$dir/.ignore.$$
-      else
-         tfile=
+      if test -n "$copied"; then
+	insert_sorted_if_absent $ig "$copied"
+	# If an ignored file name ends with .in.h, then also add
+	# the name with just ".h".  Many gnulib headers are generated,
+	# e.g., stdint.in.h -> stdint.h, dirent.in.h ->..., etc.
+	# Likewise for .gperf -> .h, .y -> .c, and .sin -> .sed
+	f=`echo "$copied"|sed 's/\.in\.h$/.h/;s/\.sin$/.sed/;s/\.y$/.c/;s/\.gperf$/.h/'`
+	insert_sorted_if_absent $ig "$f"
+
+	# For files like sys_stat.in.h and sys_time.in.h, record as
+	# ignorable the directory we might eventually create: sys/.
+	f=`echo "$copied"|sed 's/sys_.*\.in\.h$/sys/'`
+	insert_sorted_if_absent $ig "$f"
       fi
-      if test -f $ig; then
-	  echo "$copied" | sort -u - $ig | cmp -s - $ig ||
-	  echo "$copied" | sort -u - $ig $tfile -o $ig
-      else
-          copied="$dot_ig
-$copied"	  
-	  if [ "$dir" = "po" ]; then
-	    copied="LINGUAS
-Makevars
-POTFILES
-*.mo
-*.gmo
-*.po
-remove-potcdate.sed
-stamp-po
-$package.pot
-$copied"
-          fi  
-          echo "$copied" | sort -u - $tfile -o $ig
-      fi || exit
-    fi
+    done
   done
 }
 
 
 # Create boot temporary directories to import from gnulib and gettext.
-
-bt='.#bootmp'
-bt2=${bt}2
 rm -fr $bt $bt2 &&
 mkdir $bt $bt2 || exit
 
 # Import from gnulib.
 
-test -d build-aux || {
-  echo "$0: mkdir build-aux ..." &&
-  mkdir build-aux
-} || exit
 gnulib_tool_options="\
  --import\
  --no-changelog\
- --aux-dir $bt/build-aux\
- --doc-base $bt/doc\
- --lib lib$package\
- --m4-base $bt/m4/\
- --source-base $bt/lib/\
- --tests-base $bt/tests\
- --local-dir gl\
+ --aux-dir $bt/$build_aux\
+ --doc-base $bt/$doc_base\
+ --lib $gnulib_name\
+ --m4-base $bt/$m4_base/\
+ --source-base $bt/$source_base/\
+ --tests-base $bt/$tests_base\
+ --local-dir $local_gl_dir\
+ $gnulib_tool_option_extras\
 "
 echo "$0: $gnulib_tool $gnulib_tool_options --import ..."
 $gnulib_tool $gnulib_tool_options --import $gnulib_modules &&
 slurp $bt || exit
 
 for file in $gnulib_files; do
-  symlink_to_gnulib $file || exit
+  symlink_to_dir "$GNULIB_SRCDIR" $file || exit
 done
 
 
 # Import from gettext.
+with_gettext=yes
+grep '^[	 ]*AM_GNU_GETTEXT_VERSION(' configure.ac >/dev/null || \
+    with_gettext=no
+
+if test $with_gettext = yes; then
+  echo "$0: (cd $bt2; autopoint) ..."
+  cp configure.ac $bt2 &&
+  (cd $bt2 && autopoint && rm configure.ac) &&
+  slurp $bt2 $bt || exit
+fi
+rm -fr $bt $bt2 || exit
 
-echo "$0: (cd $bt2; autopoint) ..."
-cp configure.ac $bt2 &&
-(cd $bt2 && autopoint && rm configure.ac) &&
-slurp $bt2 $bt || exit
+# Remove any dangling symlink matching "*.m4" or "*.[ch]" in some
+# gnulib-populated directories.  Such .m4 files would cause aclocal to fail.
+# The following requires GNU find 4.2.3 or newer.  Considering the usual
+# portability constraints of this script, that may seem a very demanding
+# requirement, but it should be ok.  Ignore any failure, which is fine,
+# since this is only a convenience to help developers avoid the relatively
+# unusual case in which a symlinked-to .m4 file is git-removed from gnulib
+# between successive runs of this script.
+find "$m4_base" "$source_base" \
+  -depth \( -name '*.m4' -o -name '*.[ch]' \) \
+  -type l -xtype l -delete > /dev/null 2>&1
 
-rm -fr $bt $bt2 || exit
+# copy_files srcdir dstdir
+copy_files() {
+  for file in `cat $1/DISTFILES`
+  do
+    case $file in
+    "#*")  continue;;
+    esac
+    dst=`echo $file | sed 's^.*/^^'`
+    if [ $# -eq 3 ]; then
+      case $dst in
+      ${3}*) ;;
+      *) dst=${3}$dst;;
+      esac
+    fi
+    symlink_to_dir "$1" "$file" "$2/$dst" || exit
+# FIXME    ignorefile $2 $dst
+  done
+}
 
 # Import from paxutils
-copy_files ${PAXUTILS_SRCDIR}/m4 m4
+copy_files ${PAXUTILS_SRCDIR} .
+copy_files ${PAXUTILS_SRCDIR}/am m4
 echo "$0: Creating m4/paxutils.m4"
 (echo "# This file is generated automatically. Please, do not edit."
  echo "#"
  echo "AC_DEFUN([${package}_PAXUTILS],["
- cat ${PAXUTILS_SRCDIR}/m4/DISTFILES | sed '/^#/d;s/\(.*\)\.m4/pu_\1/' | tr a-z A-Z
+ cat ${PAXUTILS_SRCDIR}/am/DISTFILES | sed '/^#/d;s/\(.*\)\.m4/pu_\1/' | tr a-z A-Z
  echo "])") > ./m4/paxutils.m4
-ignorefile m4 paxutils.m4
+#FIXME ignorefile m4 paxutils.m4
 
 if [ -d rmt ]; then
    :
@@ -595,59 +659,75 @@ done
 
 copy_files ${PAXUTILS_SRCDIR}/paxlib lib pax
 
+
 # Reconfigure, getting other files.
 
 for command in \
+  libtool \
   'aclocal --force -I m4' \
   'autoconf --force' \
   'autoheader --force' \
   'automake --add-missing --copy --force-missing';
 do
+  if test "$command" = libtool; then
+    use_libtool=0
+    # We'd like to use grep -E, to see if any of LT_INIT,
+    # AC_PROG_LIBTOOL, AM_PROG_LIBTOOL is used in configure.ac,
+    # but that's not portable enough (e.g., for Solaris).
+    grep '^[	 ]*A[CM]_PROG_LIBTOOL' configure.ac >/dev/null \
+      && use_libtool=1
+    grep '^[	 ]*LT_INIT' configure.ac >/dev/null \
+      && use_libtool=1
+    test $use_libtool = 0 \
+      && continue
+    command='libtoolize -c -f'
+  fi
   echo "$0: $command ..."
   $command || exit
 done
 
 
 # Get some extra files from gnulib, overriding existing files.
-
 for file in $gnulib_extra_files; do
   case $file in
   */INSTALL) dst=INSTALL;;
+  build-aux/*) dst=$build_aux/`expr "$file" : 'build-aux/\(.*\)'`;;
   *) dst=$file;;
   esac
-  symlink_to_gnulib $file $dst || exit
+  symlink_to_dir "$GNULIB_SRCDIR" $file $dst || exit
 done
 
-
-# Create gettext configuration.
-echo "$0: Creating po/Makevars from po/Makevars.template ..."
-rm -f po/Makevars
-sed '
-  /^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/
-  /^MSGID_BUGS_ADDRESS *=/s/=.*/= bug-'"$package"'@gnu.org/
-  /^XGETTEXT_OPTIONS *=/{
-    s/$/ \\/
-    a\
-	'"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+}
-  }
-' po/Makevars.template >po/Makevars
-
-if test -d runtime-po; then
-  # Similarly for runtime-po/Makevars, but not quite the same.
-  rm -f runtime-po/Makevars
+if test $with_gettext = yes; then
+  # Create gettext configuration.
+  echo "$0: Creating po/Makevars from po/Makevars.template ..."
+  rm -f po/Makevars
   sed '
-    /^DOMAIN *=.*/s/=.*/= '"$package"'-runtime/
-    /^subdir *=.*/s/=.*/= runtime-po/
-    /^MSGID_BUGS_ADDRESS *=/s/=.*/= bug-'"$package"'@gnu.org/
+    /^EXTRA_LOCALE_CATEGORIES *=/s/=.*/= '"$EXTRA_LOCALE_CATEGORIES"'/
+    /^MSGID_BUGS_ADDRESS *=/s/=.*/= '"$MSGID_BUGS_ADDRESS"'/
     /^XGETTEXT_OPTIONS *=/{
       s/$/ \\/
       a\
-	  '"$XGETTEXT_OPTIONS_RUNTIME"' $${end_of_xgettext_options+}
+	  '"$XGETTEXT_OPTIONS"' $${end_of_xgettext_options+}
     }
-  ' <po/Makevars.template >runtime-po/Makevars
+  ' po/Makevars.template >po/Makevars
+
+  if test -d runtime-po; then
+    # Similarly for runtime-po/Makevars, but not quite the same.
+    rm -f runtime-po/Makevars
+    sed '
+      /^DOMAIN *=.*/s/=.*/= '"$package"'-runtime/
+      /^subdir *=.*/s/=.*/= runtime-po/
+      /^MSGID_BUGS_ADDRESS *=/s/=.*/= bug-'"$package"'@gnu.org/
+      /^XGETTEXT_OPTIONS *=/{
+	s/$/ \\/
+	a\
+	    '"$XGETTEXT_OPTIONS_RUNTIME"' $${end_of_xgettext_options+}
+      }
+    ' <po/Makevars.template >runtime-po/Makevars
 
-  # Copy identical files from po to runtime-po.
-  (cd po && cp -p Makefile.in.in *-quot *.header *.sed *.sin ../runtime-po)
+    # Copy identical files from po to runtime-po.
+    (cd po && cp -p Makefile.in.in *-quot *.header *.sed *.sin ../runtime-po)
+  fi
 fi
-cleanup_ifl
+
 echo "$0: done.  Now you can run './configure'."

bootstrap.conf

@@ -1,6 +1,6 @@
-# Bootstrap configuration.
+# Bootstrap configuration for GNU tar.
 
-# Copyright (C) 2006, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,6 +17,9 @@
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
 # 02110-1301, USA.
 
+source_base=gnu
+gnulib_name=libgnu
+gnulib_mk=Makefile.am
 
 # We don't need these modules, even though gnulib-tool mistakenly
 # includes them because of gettext dependencies.
@@ -55,3 +58,17 @@ excluded_files='
     m4/ulonglong.m4
     m4/visibility.m4
 '
+
+# Read local configuration file
+if [ -r .bootstrap ]; then
+  echo "$0: Reading configuration file .bootstrap"
+  eval set -- "`sed 's/#.*$//;/^$/d' .bootstrap | tr '\n' ' '` $*"
+fi
+
+test -d m4 || mkdir m4
+test -d $source_base || mkdir $source_base
+
+cat > ChangeLog <<EOT
+This file is a placeholder. It will be replaced with the actual ChangeLog
+by make dist.  Run make ChangeLog if you wish to create it earlier.
+EOT

configure.ac

@@ -21,7 +21,7 @@
 AC_INIT([GNU tar], [1.22], [bug-tar@gnu.org])
 AC_CONFIG_SRCDIR([src/tar.c])
 AC_CONFIG_AUX_DIR([build-aux])
-AC_CONFIG_HEADERS([config.h:config.hin])
+AC_CONFIG_HEADERS([config.h])
 AC_PREREQ([2.60])
 AM_INIT_AUTOMAKE([1.9 gnits tar-ustar dist-bzip2 dist-shar std-options])
 
@@ -48,7 +48,6 @@ AC_CHECK_HEADERS([sys/buf.h], [], [],
 #endif])
 
 AC_HEADER_SYS_WAIT
-AM_STDBOOL_H
 
 AC_HEADER_DIRENT
 AC_HEADER_MAJOR
@@ -241,6 +240,7 @@ fi
 
 AC_OUTPUT([Makefile\
            doc/Makefile\
+	   gnu/Makefile\
            lib/Makefile\
            po/Makefile.in\
            scripts/Makefile\

doc/.cvsignore → doc/.gitignore

@@ -1,37 +1,26 @@
-*.stamp
-Makefile
-Makefile.in
-genfile.texi
 getdate.texi
-header.texi
-html_chapter
-html_mono
-html_node
+manual
 stamp-vti
-tar.at
-tar.ats
 tar.aux
 tar.cp
 tar.cps
-tar.dvi
-tar.ex
-tar.exs
+tar.fl
 tar.fn
-tar.fns
-tar.html
+tar.info
 tar.info*
+tar.info-*
 tar.kw
-tar.kws
 tar.ky
 tar.log
+tar.mt
 tar.op
-tar.ops
 tar.pdf
 tar.pg
-tar.pgs
-tar.ps
+tar.pr
+tar.t2d
 tar.toc
 tar.tp
 tar.vr
-tar.vrs
 version.texi
+genfile.texi
+header.texi

gnulib.modules

@@ -22,6 +22,7 @@ getopt
 getpagesize
 gettext
 gettime
+gitlog-to-changelog
 hash
 human
 inttypes

lib/.cvsignore

@@ -1,287 +0,0 @@
-.cvsignore
-.deps
-Makefile
-Makefile.in
-alloca.c
-alloca.h
-alloca.in.h
-argmatch.c
-argmatch.h
-argp-ba.c
-argp-eexst.c
-argp-fmtstream.c
-argp-fmtstream.h
-argp-fs-xinl.c
-argp-help.c
-argp-namefrob.h
-argp-parse.c
-argp-pin.c
-argp-pv.c
-argp-pvh.c
-argp-xinl.c
-argp.h
-asnprintf.c
-at-func.c
-backupfile.c
-backupfile.h
-basename.c
-btowc.c
-c-ctype.c
-c-ctype.h
-canonicalize-lgpl.c
-canonicalize.h
-charset.alias
-chdir-long.c
-chdir-long.h
-chown.c
-close-stream.c
-close-stream.h
-close.c
-closeout.c
-closeout.h
-config.charset
-configmake.h
-creat-safer.c
-dirent.h
-dirent.in.h
-dirfd.c
-dirfd.h
-dirname.c
-dirname.h
-dup-safer.c
-dup2.c
-errno.in.h
-error.c
-error.h
-exclude.c
-exclude.h
-exitfail.c
-exitfail.h
-fchdir.c
-fchmodat.c
-fchown-stub.c
-fchownat.c
-fclose.c
-fcntl--.h
-fcntl-safer.h
-fcntl.h
-fcntl.in.h
-fd-safer.c
-fileblocks.c
-float+.h
-float.h
-float.in.h
-fnmatch.c
-fnmatch.h
-fnmatch.in.h
-fnmatch_loop.c
-fpending.c
-fpending.h
-fseeko.c
-fstatat.c
-ftruncate.c
-full-write.c
-full-write.h
-getcwd.c
-getdate.c
-getdate.h
-getdate.y
-getdelim.c
-getline.c
-getopt.c
-getopt.h
-getopt.in.h
-getopt1.c
-getopt_int.h
-getpagesize.c
-getpagesize.h
-gettext.h
-gettime.c
-gettimeofday.c
-gnulib.mk
-hash.c
-hash.h
-human.c
-human.h
-imaxtostr.c
-intprops.h
-inttostr.c
-inttostr.h
-inttypes.h
-inttypes.in.h
-lchown.c
-localcharset.c
-localcharset.h
-lseek.c
-lstat.c
-lstat.h
-malloc.c
-malloca.c
-malloca.h
-malloca.valgrind
-mbchar.c
-mbchar.h
-mbrtowc.c
-mbscasecmp.c
-mbsinit.c
-mbuiter.h
-memchr.c
-mempcpy.c
-memrchr.c
-memset.c
-mkdirat.c
-mkdtemp.c
-mktime.c
-modechange.c
-modechange.h
-obstack.c
-obstack.h
-offtostr.c
-open-safer.c
-open.c
-openat-die.c
-openat-priv.h
-openat-proc.c
-openat.c
-openat.h
-pathmax.h
-paxerror.c
-paxexit.c
-paxlib.h
-paxnames.c
-pipe-safer.c
-printf-args.c
-printf-args.h
-printf-parse.c
-printf-parse.h
-quote.c
-quote.h
-quotearg.c
-quotearg.h
-rawmemchr.c
-rawmemchr.valgrind
-readlink.c
-realloc.c
-ref-add.sed
-ref-add.sin
-ref-del.sed
-ref-del.sin
-regcomp.c
-regex.c
-regex.h
-regex_internal.c
-regex_internal.h
-regexec.c
-rmdir.c
-rmt-command.h
-rmt.h
-rpmatch.c
-rtapelib.c
-safe-read.c
-safe-read.h
-safe-write.c
-safe-write.h
-same-inode.h
-save-cwd.c
-save-cwd.h
-savedir.c
-savedir.h
-setenv.c
-setenv.h
-size_max.h
-sleep.c
-snprintf.c
-stat-macros.h
-stat-time.h
-stdarg.in.h
-stdbool.h
-stdbool.in.h
-stdint.h
-stdint.in.h
-stdio-impl.h
-stdio-write.c
-stdio.h
-stdio.in.h
-stdlib.h
-stdlib.in.h
-stpcpy.c
-strcasecmp.c
-strchrnul.c
-strchrnul.valgrind
-strdup.c
-streq.h
-strerror.c
-string.h
-string.in.h
-strings.in.h
-stripslash.c
-strncasecmp.c
-strndup.c
-strnlen.c
-strnlen1.c
-strnlen1.h
-strtoimax.c
-strtol.c
-strtoll.c
-strtoul.c
-strtoull.c
-strtoumax.c
-sys
-sys_stat.h
-sys_stat.in.h
-sys_time.h
-sys_time.in.h
-sysexits.h
-sysexits.in.h
-system-ioctl.h
-system.h
-tempname.c
-tempname.h
-time.h
-time.in.h
-time_r.c
-timespec.h
-uinttostr.c
-umaxtostr.c
-unistd--.h
-unistd-safer.h
-unistd.h
-unistd.in.h
-unitypes.h
-uniwidth
-uniwidth.h
-unlinkdir.c
-unlinkdir.h
-unlocked-io.h
-unsetenv.c
-utime.c
-utimens.c
-utimens.h
-vasnprintf.c
-vasnprintf.h
-verify.h
-version-etc-fsf.c
-version-etc.c
-version-etc.h
-vsnprintf.c
-w32sock.h
-wchar.h
-wchar.in.h
-wcrtomb.c
-wctype.h
-wctype.in.h
-wcwidth.c
-write.c
-xalloc-die.c
-xalloc.h
-xgetcwd.c
-xgetcwd.h
-xmalloc.c
-xsize.h
-xstrndup.c
-xstrndup.h
-xstrtol-error.c
-xstrtol.c
-xstrtol.h
-xstrtoul.c
-xstrtoumax.c

lib/Makefile.am

@@ -1,7 +1,7 @@
 # Makefile for GNU tar library.			-*- Makefile -*-
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2003, 2004,
-# 2005, 2006, 2007 Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2009 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,19 +17,19 @@
 # with this program; if not, write to the Free Software Foundation, Inc.,
 # 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 
-include gnulib.mk
-
+noinst_LIBRARIES=libtar.a
 rmt-command.h : Makefile
 	rm -f $@-t $@
 	echo "#ifndef DEFAULT_RMT_COMMAND" >> $@-t
 	echo "# define DEFAULT_RMT_COMMAND \"$(DEFAULT_RMT_DIR)/`echo rmt | sed '$(transform)'`$(EXEEXT)\"" >> $@-t
 	echo "#endif" >> $@-t
 	mv $@-t $@
-BUILT_SOURCES += rmt-command.h
-CLEANFILES += rmt-command.h rmt-command.h-t
+BUILT_SOURCES = rmt-command.h
+CLEANFILES = rmt-command.h rmt-command.h-t
+INCLUDES = -I$(top_srcdir)/gnu -I../ -I../gnu 
 
-noinst_HEADERS += system.h system-ioctl.h rmt.h paxlib.h stdopen.h
-libtar_a_SOURCES += \
+noinst_HEADERS = system.h system-ioctl.h rmt.h paxlib.h stdopen.h
+libtar_a_SOURCES = \
   paxerror.c paxexit.c paxlib.h paxnames.c \
   prepargs.c prepargs.h \
   rtapelib.c \
@@ -37,5 +37,3 @@ libtar_a_SOURCES += \
   stdopen.c stdopen.h \
   system.h system-ioctl.h
 
-libtar_a_LIBADD += $(LIBOBJS)
-libtar_a_DEPENDENCIES += $(LIBOBJS)

lib/alloca.c

@@ -1,508 +0,0 @@
-/* alloca.c -- allocate automatically reclaimed memory
-   (Mostly) portable public-domain implementation -- D A Gwyn
-
-   This implementation of the PWB library alloca function,
-   which is used to allocate space off the run-time stack so
-   that it is automatically reclaimed upon procedure exit,
-   was inspired by discussions with J. Q. Johnson of Cornell.
-   J.Otto Tennant <jot@cray.com> contributed the Cray support.
-
-   There are some preprocessor constants that can
-   be defined when compiling for your specific system, for
-   improved efficiency; however, the defaults should be okay.
-
-   The general concept of this implementation is to keep
-   track of all alloca-allocated blocks, and reclaim any
-   that are found to be deeper in the stack than the current
-   invocation.  This heuristic does not reclaim storage as
-   soon as it becomes invalid, but it will do so eventually.
-
-   As a special case, alloca(0) reclaims storage without
-   allocating any.  It is a good idea to use alloca(0) in
-   your main control loop, etc. to force garbage collection.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if HAVE_STRING_H
-# include <string.h>
-#endif
-#if HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-
-#ifdef emacs
-# include "lisp.h"
-# include "blockinput.h"
-# define xalloc_die() memory_full ()
-# ifdef EMACS_FREE
-#  undef free
-#  define free EMACS_FREE
-# endif
-#else
-# include <xalloc.h>
-#endif
-
-/* If compiling with GCC 2, this file's not needed.  */
-#if !defined (__GNUC__) || __GNUC__ < 2
-
-/* If someone has defined alloca as a macro,
-   there must be some other way alloca is supposed to work.  */
-# ifndef alloca
-
-#  ifdef emacs
-#   ifdef static
-/* actually, only want this if static is defined as ""
-   -- this is for usg, in which emacs must undefine static
-   in order to make unexec workable
-   */
-#    ifndef STACK_DIRECTION
-you
-lose
--- must know STACK_DIRECTION at compile-time
-/* Using #error here is not wise since this file should work for
-   old and obscure compilers.  */
-#    endif /* STACK_DIRECTION undefined */
-#   endif /* static */
-#  endif /* emacs */
-
-/* If your stack is a linked list of frames, you have to
-   provide an "address metric" ADDRESS_FUNCTION macro.  */
-
-#  if defined (CRAY) && defined (CRAY_STACKSEG_END)
-long i00afunc ();
-#   define ADDRESS_FUNCTION(arg) (char *) i00afunc (&(arg))
-#  else
-#   define ADDRESS_FUNCTION(arg) &(arg)
-#  endif
-
-#  ifndef POINTER_TYPE
-#   ifdef __STDC__
-#    define POINTER_TYPE void
-#   else
-#    define POINTER_TYPE char
-#   endif
-#  endif
-typedef POINTER_TYPE *pointer;
-
-#  ifndef NULL
-#   define NULL 0
-#  endif
-
-/* Define STACK_DIRECTION if you know the direction of stack
-   growth for your system; otherwise it will be automatically
-   deduced at run-time.
-
-   STACK_DIRECTION > 0 => grows toward higher addresses
-   STACK_DIRECTION < 0 => grows toward lower addresses
-   STACK_DIRECTION = 0 => direction of growth unknown  */
-
-#  ifndef STACK_DIRECTION
-#   define STACK_DIRECTION	0	/* Direction unknown.  */
-#  endif
-
-#  if STACK_DIRECTION != 0
-
-#   define STACK_DIR	STACK_DIRECTION	/* Known at compile-time.  */
-
-#  else /* STACK_DIRECTION == 0; need run-time code.  */
-
-static int stack_dir;		/* 1 or -1 once known.  */
-#   define STACK_DIR	stack_dir
-
-static void
-find_stack_direction ()
-{
-  static char *addr = NULL;	/* Address of first `dummy', once known.  */
-  auto char dummy;		/* To get stack address.  */
-
-  if (addr == NULL)
-    {				/* Initial entry.  */
-      addr = ADDRESS_FUNCTION (dummy);
-
-      find_stack_direction ();	/* Recurse once.  */
-    }
-  else
-    {
-      /* Second entry.  */
-      if (ADDRESS_FUNCTION (dummy) > addr)
-	stack_dir = 1;		/* Stack grew upward.  */
-      else
-	stack_dir = -1;		/* Stack grew downward.  */
-    }
-}
-
-#  endif /* STACK_DIRECTION == 0 */
-
-/* An "alloca header" is used to:
-   (a) chain together all alloca'ed blocks;
-   (b) keep track of stack depth.
-
-   It is very important that sizeof(header) agree with malloc
-   alignment chunk size.  The following default should work okay.  */
-
-#  ifndef	ALIGN_SIZE
-#   define ALIGN_SIZE	sizeof(double)
-#  endif
-
-typedef union hdr
-{
-  char align[ALIGN_SIZE];	/* To force sizeof(header).  */
-  struct
-    {
-      union hdr *next;		/* For chaining headers.  */
-      char *deep;		/* For stack depth measure.  */
-    } h;
-} header;
-
-static header *last_alloca_header = NULL;	/* -> last alloca header.  */
-
-/* Return a pointer to at least SIZE bytes of storage,
-   which will be automatically reclaimed upon exit from
-   the procedure that called alloca.  Originally, this space
-   was supposed to be taken from the current stack frame of the
-   caller, but that method cannot be made to work for some
-   implementations of C, for example under Gould's UTX/32.  */
-
-pointer
-alloca (size)
-     size_t size;
-{
-  auto char probe;		/* Probes stack depth: */
-  register char *depth = ADDRESS_FUNCTION (probe);
-
-#  if STACK_DIRECTION == 0
-  if (STACK_DIR == 0)		/* Unknown growth direction.  */
-    find_stack_direction ();
-#  endif
-
-  /* Reclaim garbage, defined as all alloca'd storage that
-     was allocated from deeper in the stack than currently.  */
-
-  {
-    register header *hp;	/* Traverses linked list.  */
-
-#  ifdef emacs
-    BLOCK_INPUT;
-#  endif
-
-    for (hp = last_alloca_header; hp != NULL;)
-      if ((STACK_DIR > 0 && hp->h.deep > depth)
-	  || (STACK_DIR < 0 && hp->h.deep < depth))
-	{
-	  register header *np = hp->h.next;
-
-	  free ((pointer) hp);	/* Collect garbage.  */
-
-	  hp = np;		/* -> next header.  */
-	}
-      else
-	break;			/* Rest are not deeper.  */
-
-    last_alloca_header = hp;	/* -> last valid storage.  */
-
-#  ifdef emacs
-    UNBLOCK_INPUT;
-#  endif
-  }
-
-  if (size == 0)
-    return NULL;		/* No allocation required.  */
-
-  /* Allocate combined header + user data storage.  */
-
-  {
-    /* Address of header.  */
-    register pointer new;
-
-    size_t combined_size = sizeof (header) + size;
-    if (combined_size < sizeof (header))
-      xalloc_die ();
-
-    new = xmalloc (combined_size);
-
-    if (new == 0)
-      abort();
-
-    ((header *) new)->h.next = last_alloca_header;
-    ((header *) new)->h.deep = depth;
-
-    last_alloca_header = (header *) new;
-
-    /* User storage begins just after header.  */
-
-    return (pointer) ((char *) new + sizeof (header));
-  }
-}
-
-#  if defined (CRAY) && defined (CRAY_STACKSEG_END)
-
-#   ifdef DEBUG_I00AFUNC
-#    include <stdio.h>
-#   endif
-
-#   ifndef CRAY_STACK
-#    define CRAY_STACK
-#    ifndef CRAY2
-/* Stack structures for CRAY-1, CRAY X-MP, and CRAY Y-MP */
-struct stack_control_header
-  {
-    long shgrow:32;		/* Number of times stack has grown.  */
-    long shaseg:32;		/* Size of increments to stack.  */
-    long shhwm:32;		/* High water mark of stack.  */
-    long shsize:32;		/* Current size of stack (all segments).  */
-  };
-
-/* The stack segment linkage control information occurs at
-   the high-address end of a stack segment.  (The stack
-   grows from low addresses to high addresses.)  The initial
-   part of the stack segment linkage control information is
-   0200 (octal) words.  This provides for register storage
-   for the routine which overflows the stack.  */
-
-struct stack_segment_linkage
-  {
-    long ss[0200];		/* 0200 overflow words.  */
-    long sssize:32;		/* Number of words in this segment.  */
-    long ssbase:32;		/* Offset to stack base.  */
-    long:32;
-    long sspseg:32;		/* Offset to linkage control of previous
-				   segment of stack.  */
-    long:32;
-    long sstcpt:32;		/* Pointer to task common address block.  */
-    long sscsnm;		/* Private control structure number for
-				   microtasking.  */
-    long ssusr1;		/* Reserved for user.  */
-    long ssusr2;		/* Reserved for user.  */
-    long sstpid;		/* Process ID for pid based multi-tasking.  */
-    long ssgvup;		/* Pointer to multitasking thread giveup.  */
-    long sscray[7];		/* Reserved for Cray Research.  */
-    long ssa0;
-    long ssa1;
-    long ssa2;
-    long ssa3;
-    long ssa4;
-    long ssa5;
-    long ssa6;
-    long ssa7;
-    long sss0;
-    long sss1;
-    long sss2;
-    long sss3;
-    long sss4;
-    long sss5;
-    long sss6;
-    long sss7;
-  };
-
-#    else /* CRAY2 */
-/* The following structure defines the vector of words
-   returned by the STKSTAT library routine.  */
-struct stk_stat
-  {
-    long now;			/* Current total stack size.  */
-    long maxc;			/* Amount of contiguous space which would
-				   be required to satisfy the maximum
-				   stack demand to date.  */
-    long high_water;		/* Stack high-water mark.  */
-    long overflows;		/* Number of stack overflow ($STKOFEN) calls.  */
-    long hits;			/* Number of internal buffer hits.  */
-    long extends;		/* Number of block extensions.  */
-    long stko_mallocs;		/* Block allocations by $STKOFEN.  */
-    long underflows;		/* Number of stack underflow calls ($STKRETN).  */
-    long stko_free;		/* Number of deallocations by $STKRETN.  */
-    long stkm_free;		/* Number of deallocations by $STKMRET.  */
-    long segments;		/* Current number of stack segments.  */
-    long maxs;			/* Maximum number of stack segments so far.  */
-    long pad_size;		/* Stack pad size.  */
-    long current_address;	/* Current stack segment address.  */
-    long current_size;		/* Current stack segment size.  This
-				   number is actually corrupted by STKSTAT to
-				   include the fifteen word trailer area.  */
-    long initial_address;	/* Address of initial segment.  */
-    long initial_size;		/* Size of initial segment.  */
-  };
-
-/* The following structure describes the data structure which trails
-   any stack segment.  I think that the description in 'asdef' is
-   out of date.  I only describe the parts that I am sure about.  */
-
-struct stk_trailer
-  {
-    long this_address;		/* Address of this block.  */
-    long this_size;		/* Size of this block (does not include
-				   this trailer).  */
-    long unknown2;
-    long unknown3;
-    long link;			/* Address of trailer block of previous
-				   segment.  */
-    long unknown5;
-    long unknown6;
-    long unknown7;
-    long unknown8;
-    long unknown9;
-    long unknown10;
-    long unknown11;
-    long unknown12;
-    long unknown13;
-    long unknown14;
-  };
-
-#    endif /* CRAY2 */
-#   endif /* not CRAY_STACK */
-
-#   ifdef CRAY2
-/* Determine a "stack measure" for an arbitrary ADDRESS.
-   I doubt that "lint" will like this much.  */
-
-static long
-i00afunc (long *address)
-{
-  struct stk_stat status;
-  struct stk_trailer *trailer;
-  long *block, size;
-  long result = 0;
-
-  /* We want to iterate through all of the segments.  The first
-     step is to get the stack status structure.  We could do this
-     more quickly and more directly, perhaps, by referencing the
-     $LM00 common block, but I know that this works.  */
-
-  STKSTAT (&status);
-
-  /* Set up the iteration.  */
-
-  trailer = (struct stk_trailer *) (status.current_address
-				    + status.current_size
-				    - 15);
-
-  /* There must be at least one stack segment.  Therefore it is
-     a fatal error if "trailer" is null.  */
-
-  if (trailer == 0)
-    abort ();
-
-  /* Discard segments that do not contain our argument address.  */
-
-  while (trailer != 0)
-    {
-      block = (long *) trailer->this_address;
-      size = trailer->this_size;
-      if (block == 0 || size == 0)
-	abort ();
-      trailer = (struct stk_trailer *) trailer->link;
-      if ((block <= address) && (address < (block + size)))
-	break;
-    }
-
-  /* Set the result to the offset in this segment and add the sizes
-     of all predecessor segments.  */
-
-  result = address - block;
-
-  if (trailer == 0)
-    {
-      return result;
-    }
-
-  do
-    {
-      if (trailer->this_size <= 0)
-	abort ();
-      result += trailer->this_size;
-      trailer = (struct stk_trailer *) trailer->link;
-    }
-  while (trailer != 0);
-
-  /* We are done.  Note that if you present a bogus address (one
-     not in any segment), you will get a different number back, formed
-     from subtracting the address of the first block.  This is probably
-     not what you want.  */
-
-  return (result);
-}
-
-#   else /* not CRAY2 */
-/* Stack address function for a CRAY-1, CRAY X-MP, or CRAY Y-MP.
-   Determine the number of the cell within the stack,
-   given the address of the cell.  The purpose of this
-   routine is to linearize, in some sense, stack addresses
-   for alloca.  */
-
-static long
-i00afunc (long address)
-{
-  long stkl = 0;
-
-  long size, pseg, this_segment, stack;
-  long result = 0;
-
-  struct stack_segment_linkage *ssptr;
-
-  /* Register B67 contains the address of the end of the
-     current stack segment.  If you (as a subprogram) store
-     your registers on the stack and find that you are past
-     the contents of B67, you have overflowed the segment.
-
-     B67 also points to the stack segment linkage control
-     area, which is what we are really interested in.  */
-
-  stkl = CRAY_STACKSEG_END ();
-  ssptr = (struct stack_segment_linkage *) stkl;
-
-  /* If one subtracts 'size' from the end of the segment,
-     one has the address of the first word of the segment.
-
-     If this is not the first segment, 'pseg' will be
-     nonzero.  */
-
-  pseg = ssptr->sspseg;
-  size = ssptr->sssize;
-
-  this_segment = stkl - size;
-
-  /* It is possible that calling this routine itself caused
-     a stack overflow.  Discard stack segments which do not
-     contain the target address.  */
-
-  while (!(this_segment <= address && address <= stkl))
-    {
-#    ifdef DEBUG_I00AFUNC
-      fprintf (stderr, "%011o %011o %011o\n", this_segment, address, stkl);
-#    endif
-      if (pseg == 0)
-	break;
-      stkl = stkl - pseg;
-      ssptr = (struct stack_segment_linkage *) stkl;
-      size = ssptr->sssize;
-      pseg = ssptr->sspseg;
-      this_segment = stkl - size;
-    }
-
-  result = address - this_segment;
-
-  /* If you subtract pseg from the current end of the stack,
-     you get the address of the previous stack segment's end.
-     This seems a little convoluted to me, but I'll bet you save
-     a cycle somewhere.  */
-
-  while (pseg != 0)
-    {
-#    ifdef DEBUG_I00AFUNC
-      fprintf (stderr, "%011o %011o\n", pseg, size);
-#    endif
-      stkl = stkl - pseg;
-      ssptr = (struct stack_segment_linkage *) stkl;
-      size = ssptr->sssize;
-      pseg = ssptr->sspseg;
-      result += size;
-    }
-  return (result);
-}
-
-#   endif /* not CRAY2 */
-#  endif /* CRAY */
-
-# endif /* no alloca */
-#endif /* not GCC version 2 */

lib/argmatch.c

@@ -1,280 +0,0 @@
-/* argmatch.c -- find a match for a string in an array
-
-   Copyright (C) 1990, 1998, 1999, 2001, 2002, 2003 Free Software
-   Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by David MacKenzie <djm@ai.mit.edu>
-   Modified by Akim Demaille <demaille@inf.enst.fr> */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-/* Specification.  */
-#include "argmatch.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "gettext.h"
-#define _(msgid) gettext (msgid)
-
-#include "error.h"
-#include "quotearg.h"
-#include "quote.h"
-#include "unlocked-io.h"
-
-/* When reporting an invalid argument, show nonprinting characters
-   by using the quoting style ARGMATCH_QUOTING_STYLE.  Do not use
-   literal_quoting_style.  */
-#ifndef ARGMATCH_QUOTING_STYLE
-# define ARGMATCH_QUOTING_STYLE locale_quoting_style
-#endif
-
-#ifndef EXIT_FAILURE
-# define EXIT_FAILURE 1
-#endif
-
-/* Non failing version of argmatch call this function after failing. */
-#ifndef ARGMATCH_DIE
-# define ARGMATCH_DIE exit (EXIT_FAILURE)
-#endif
-
-#ifdef ARGMATCH_DIE_DECL
-ARGMATCH_DIE_DECL;
-#endif
-
-static void
-__argmatch_die (void)
-{
-  ARGMATCH_DIE;
-}
-
-/* Used by XARGMATCH and XARGCASEMATCH.  See description in argmatch.h.
-   Default to __argmatch_die, but allow caller to change this at run-time. */
-argmatch_exit_fn argmatch_die = __argmatch_die;
-
-
-/* If ARG is an unambiguous match for an element of the
-   null-terminated array ARGLIST, return the index in ARGLIST
-   of the matched element, else -1 if it does not match any element
-   or -2 if it is ambiguous (is a prefix of more than one element).
-
-   If VALLIST is none null, use it to resolve ambiguities limited to
-   synonyms, i.e., for
-     "yes", "yop" -> 0
-     "no", "nope" -> 1
-   "y" is a valid argument, for `0', and "n" for `1'.  */
-
-int
-argmatch (const char *arg, const char *const *arglist,
-	  const char *vallist, size_t valsize)
-{
-  int i;			/* Temporary index in ARGLIST.  */
-  size_t arglen;		/* Length of ARG.  */
-  int matchind = -1;		/* Index of first nonexact match.  */
-  int ambiguous = 0;		/* If nonzero, multiple nonexact match(es).  */
-
-  arglen = strlen (arg);
-
-  /* Test all elements for either exact match or abbreviated matches.  */
-  for (i = 0; arglist[i]; i++)
-    {
-      if (!strncmp (arglist[i], arg, arglen))
-	{
-	  if (strlen (arglist[i]) == arglen)
-	    /* Exact match found.  */
-	    return i;
-	  else if (matchind == -1)
-	    /* First nonexact match found.  */
-	    matchind = i;
-	  else
-	    {
-	      /* Second nonexact match found.  */
-	      if (vallist == NULL
-		  || memcmp (vallist + valsize * matchind,
-			     vallist + valsize * i, valsize))
-		{
-		  /* There is a real ambiguity, or we could not
-		     disambiguate. */
-		  ambiguous = 1;
-		}
-	    }
-	}
-    }
-  if (ambiguous)
-    return -2;
-  else
-    return matchind;
-}
-
-/* Error reporting for argmatch.
-   CONTEXT is a description of the type of entity that was being matched.
-   VALUE is the invalid value that was given.
-   PROBLEM is the return value from argmatch.  */
-
-void
-argmatch_invalid (const char *context, const char *value, int problem)
-{
-  char const *format = (problem == -1
-			? _("invalid argument %s for %s")
-			: _("ambiguous argument %s for %s"));
-
-  error (0, 0, format, quotearg_n_style (0, ARGMATCH_QUOTING_STYLE, value),
-	 quote_n (1, context));
-}
-
-/* List the valid arguments for argmatch.
-   ARGLIST is the same as in argmatch.
-   VALLIST is a pointer to an array of values.
-   VALSIZE is the size of the elements of VALLIST */
-void
-argmatch_valid (const char *const *arglist,
-		const char *vallist, size_t valsize)
-{
-  int i;
-  const char *last_val = NULL;
-
-  /* We try to put synonyms on the same line.  The assumption is that
-     synonyms follow each other */
-  fprintf (stderr, _("Valid arguments are:"));
-  for (i = 0; arglist[i]; i++)
-    if ((i == 0)
-	|| memcmp (last_val, vallist + valsize * i, valsize))
-      {
-	fprintf (stderr, "\n  - `%s'", arglist[i]);
-	last_val = vallist + valsize * i;
-      }
-    else
-      {
-	fprintf (stderr, ", `%s'", arglist[i]);
-      }
-  putc ('\n', stderr);
-}
-
-/* Never failing versions of the previous functions.
-
-   CONTEXT is the context for which argmatch is called (e.g.,
-   "--version-control", or "$VERSION_CONTROL" etc.).  Upon failure,
-   calls the (supposed never to return) function EXIT_FN. */
-
-int
-__xargmatch_internal (const char *context,
-		      const char *arg, const char *const *arglist,
-		      const char *vallist, size_t valsize,
-		      argmatch_exit_fn exit_fn)
-{
-  int res = argmatch (arg, arglist, vallist, valsize);
-  if (res >= 0)
-    /* Success. */
-    return res;
-
-  /* We failed.  Explain why. */
-  argmatch_invalid (context, arg, res);
-  argmatch_valid (arglist, vallist, valsize);
-  (*exit_fn) ();
-
-  return -1; /* To please the compilers. */
-}
-
-/* Look for VALUE in VALLIST, an array of objects of size VALSIZE and
-   return the first corresponding argument in ARGLIST */
-const char *
-argmatch_to_argument (const char *value,
-		      const char *const *arglist,
-		      const char *vallist, size_t valsize)
-{
-  int i;
-
-  for (i = 0; arglist[i]; i++)
-    if (!memcmp (value, vallist + valsize * i, valsize))
-      return arglist[i];
-  return NULL;
-}
-
-#ifdef TEST
-/*
- * Based on "getversion.c" by David MacKenzie <djm@gnu.ai.mit.edu>
- */
-char *program_name;
-extern const char *getenv ();
-
-/* When to make backup files.  */
-enum backup_type
-{
-  /* Never make backups.  */
-  none,
-
-  /* Make simple backups of every file.  */
-  simple,
-
-  /* Make numbered backups of files that already have numbered backups,
-     and simple backups of the others.  */
-  numbered_existing,
-
-  /* Make numbered backups of every file.  */
-  numbered
-};
-
-/* Two tables describing arguments (keys) and their corresponding
-   values */
-static const char *const backup_args[] =
-{
-  "no", "none", "off",
-  "simple", "never",
-  "existing", "nil",
-  "numbered", "t",
-  0
-};
-
-static const enum backup_type backup_vals[] =
-{
-  none, none, none,
-  simple, simple,
-  numbered_existing, numbered_existing,
-  numbered, numbered
-};
-
-int
-main (int argc, const char *const *argv)
-{
-  const char *cp;
-  enum backup_type backup_type = none;
-
-  program_name = (char *) argv[0];
-
-  if (argc > 2)
-    {
-      fprintf (stderr, "Usage: %s [VERSION_CONTROL]\n", program_name);
-      exit (1);
-    }
-
-  if ((cp = getenv ("VERSION_CONTROL")))
-    backup_type = XARGMATCH ("$VERSION_CONTROL", cp,
-			     backup_args, backup_vals);
-
-  if (argc == 2)
-    backup_type = XARGMATCH (program_name, argv[1],
-			     backup_args, backup_vals);
-
-  printf ("The version control is `%s'\n",
-	  ARGMATCH_TO_ARGUMENT (backup_type, backup_args, backup_vals));
-
-  return 0;
-}
-#endif

lib/basename.h

@@ -1,9 +0,0 @@
-#ifndef PARAMS
-# if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-#  define PARAMS(Args) Args
-# else
-#  define PARAMS(Args) ()
-# endif
-#endif
-
-char *base_name PARAMS ((char const *name));

lib/error.c

@@ -1,407 +0,0 @@
-/* Error handler for noninteractive utilities
-   Copyright (C) 1990-1998, 2000, 2001, 2002 Free Software Foundation, Inc.
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License along
-   with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by David MacKenzie <djm@gnu.ai.mit.edu>.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "gettext.h"
-#endif
-
-#ifdef _LIBC
-# include <wchar.h>
-# define mbsrtowcs __mbsrtowcs
-#endif
-
-#if HAVE_VPRINTF || HAVE_DOPRNT || _LIBC
-# if __STDC__
-#  include <stdarg.h>
-#  define VA_START(args, lastarg) va_start(args, lastarg)
-# else
-#  include <varargs.h>
-#  define VA_START(args, lastarg) va_start(args)
-# endif
-#else
-# define va_alist a1, a2, a3, a4, a5, a6, a7, a8
-# define va_dcl char *a1, *a2, *a3, *a4, *a5, *a6, *a7, *a8;
-#endif
-
-#if STDC_HEADERS || _LIBC
-# include <stdlib.h>
-# include <string.h>
-#else
-void exit ();
-#endif
-
-#include "error.h"
-
-#if !_LIBC
-# include "unlocked-io.h"
-#endif
-
-#ifndef _
-# define _(String) String
-#endif
-
-/* If NULL, error will flush stdout, then print on stderr the program
-   name, a colon and a space.  Otherwise, error will call this
-   function without parameters instead.  */
-void (*error_print_progname) (
-#if __STDC__ - 0
-			      void
-#endif
-			      );
-
-/* This variable is incremented each time `error' is called.  */
-unsigned int error_message_count;
-
-#ifdef _LIBC
-/* In the GNU C library, there is a predefined variable for this.  */
-
-# define program_name program_invocation_name
-# include <errno.h>
-# include <libio/libioP.h>
-
-/* In GNU libc we want do not want to use the common name `error' directly.
-   Instead make it a weak alias.  */
-extern void __error (int status, int errnum, const char *message, ...)
-     __attribute__ ((__format__ (__printf__, 3, 4)));
-extern void __error_at_line (int status, int errnum, const char *file_name,
-			     unsigned int line_number, const char *message,
-			     ...)
-     __attribute__ ((__format__ (__printf__, 5, 6)));;
-# define error __error
-# define error_at_line __error_at_line
-
-# ifdef USE_IN_LIBIO
-#  include <libio/iolibio.h>
-#  define fflush(s) INTUSE(_IO_fflush) (s)
-#  undef putc
-#  define putc(c, fp) INTUSE(_IO_putc) (c, fp)
-# endif
-
-#else /* not _LIBC */
-
-# if !HAVE_DECL_STRERROR_R && STRERROR_R_CHAR_P
-#  ifndef HAVE_DECL_STRERROR_R
-"this configure-time declaration test was not run"
-#  endif
-char *strerror_r ();
-# endif
-
-/* The calling program should define program_name and set it to the
-   name of the executing program.  */
-extern char *program_name;
-
-# if HAVE_STRERROR_R || defined strerror_r
-#  define __strerror_r strerror_r
-# else
-#  if HAVE_STRERROR
-#   ifndef HAVE_DECL_STRERROR
-"this configure-time declaration test was not run"
-#   endif
-#   if !HAVE_DECL_STRERROR
-char *strerror ();
-#   endif
-#  else
-static char *
-private_strerror (int errnum)
-{
-  extern char *sys_errlist[];
-  extern int sys_nerr;
-
-  if (errnum > 0 && errnum <= sys_nerr)
-    return _(sys_errlist[errnum]);
-  return _("Unknown system error");
-}
-#   define strerror private_strerror
-#  endif /* HAVE_STRERROR */
-# endif	/* HAVE_STRERROR_R || defined strerror_r */
-#endif	/* not _LIBC */
-
-static void
-print_errno_message (int errnum)
-{
-  char const *s;
-
-#if defined HAVE_STRERROR_R || _LIBC
-  char errbuf[1024];
-# if STRERROR_R_CHAR_P || _LIBC
-  s = __strerror_r (errnum, errbuf, sizeof errbuf);
-# else
-  if (__strerror_r (errnum, errbuf, sizeof errbuf) == 0)
-    s = errbuf;
-  else
-    s = 0;
-# endif
-#else
-  s = strerror (errnum);
-#endif
-
-#if !_LIBC
-  if (! s)
-    s = _("Unknown system error");
-#endif
-
-#if _LIBC && USE_IN_LIBIO
-  if (_IO_fwide (stderr, 0) > 0)
-    {
-      __fwprintf (stderr, L": %s", s);
-      return;
-    }
-#endif
-
-  fprintf (stderr, ": %s", s);
-}
-
-#ifdef VA_START
-static void
-error_tail (int status, int errnum, const char *message, va_list args)
-{
-# if HAVE_VPRINTF || _LIBC
-#  if _LIBC && USE_IN_LIBIO
-  if (_IO_fwide (stderr, 0) > 0)
-    {
-#   define ALLOCA_LIMIT	2000
-      size_t len = strlen (message) + 1;
-      wchar_t *wmessage = NULL;
-      mbstate_t st;
-      size_t res;
-      const char *tmp;
-
-      do
-	{
-	  if (len < ALLOCA_LIMIT)
-	    wmessage = (wchar_t *) alloca (len * sizeof (wchar_t));
-	  else
-	    {
-	      if (wmessage != NULL && len / 2 < ALLOCA_LIMIT)
-		wmessage = NULL;
-
-	      wmessage = (wchar_t *) realloc (wmessage,
-					      len * sizeof (wchar_t));
-
-	      if (wmessage == NULL)
-		{
-		  fputws_unlocked (L"out of memory\n", stderr);
-		  return;
-		}
-	    }
-
-	  memset (&st, '\0', sizeof (st));
-	  tmp =message;
-	}
-      while ((res = mbsrtowcs (wmessage, &tmp, len, &st)) == len);
-
-      if (res == (size_t) -1)
-	/* The string cannot be converted.  */
-	wmessage = (wchar_t *) L"???";
-
-      __vfwprintf (stderr, wmessage, args);
-    }
-  else
-#  endif
-    vfprintf (stderr, message, args);
-# else
-  _doprnt (message, args, stderr);
-# endif
-  va_end (args);
-
-  ++error_message_count;
-  if (errnum)
-    print_errno_message (errnum);
-# if _LIBC && USE_IN_LIBIO
-  if (_IO_fwide (stderr, 0) > 0)
-    putwc (L'\n', stderr);
-  else
-# endif
-    putc ('\n', stderr);
-  fflush (stderr);
-  if (status)
-    exit (status);
-}
-#endif
-
-
-/* Print the program name and error message MESSAGE, which is a printf-style
-   format string with optional args.
-   If ERRNUM is nonzero, print its corresponding system error message.
-   Exit with status STATUS if it is nonzero.  */
-/* VARARGS */
-void
-#if defined VA_START && __STDC__
-error (int status, int errnum, const char *message, ...)
-#else
-error (status, errnum, message, va_alist)
-     int status;
-     int errnum;
-     char *message;
-     va_dcl
-#endif
-{
-#ifdef VA_START
-  va_list args;
-#endif
-
-  fflush (stdout);
-#ifdef _LIBC
-# ifdef USE_IN_LIBIO
-  _IO_flockfile (stderr);
-# else
-  __flockfile (stderr);
-# endif
-#endif
-  if (error_print_progname)
-    (*error_print_progname) ();
-  else
-    {
-#if _LIBC && USE_IN_LIBIO
-      if (_IO_fwide (stderr, 0) > 0)
-	__fwprintf (stderr, L"%s: ", program_name);
-      else
-#endif
-	fprintf (stderr, "%s: ", program_name);
-    }
-
-#ifdef VA_START
-  VA_START (args, message);
-  error_tail (status, errnum, message, args);
-#else
-  fprintf (stderr, message, a1, a2, a3, a4, a5, a6, a7, a8);
-
-  ++error_message_count;
-  if (errnum)
-    print_errno_message (errnum);
-  putc ('\n', stderr);
-  fflush (stderr);
-  if (status)
-    exit (status);
-#endif
-
-#ifdef _LIBC
-# ifdef USE_IN_LIBIO
-  _IO_funlockfile (stderr);
-# else
-  __funlockfile (stderr);
-# endif
-#endif
-}
-
-/* Sometimes we want to have at most one error per line.  This
-   variable controls whether this mode is selected or not.  */
-int error_one_per_line;
-
-void
-#if defined VA_START && __STDC__
-error_at_line (int status, int errnum, const char *file_name,
-	       unsigned int line_number, const char *message, ...)
-#else
-error_at_line (status, errnum, file_name, line_number, message, va_alist)
-     int status;
-     int errnum;
-     const char *file_name;
-     unsigned int line_number;
-     char *message;
-     va_dcl
-#endif
-{
-#ifdef VA_START
-  va_list args;
-#endif
-
-  if (error_one_per_line)
-    {
-      static const char *old_file_name;
-      static unsigned int old_line_number;
-
-      if (old_line_number == line_number
-	  && (file_name == old_file_name
-	      || strcmp (old_file_name, file_name) == 0))
-	/* Simply return and print nothing.  */
-	return;
-
-      old_file_name = file_name;
-      old_line_number = line_number;
-    }
-
-  fflush (stdout);
-#ifdef _LIBC
-# ifdef USE_IN_LIBIO
-  _IO_flockfile (stderr);
-# else
-  __flockfile (stderr);
-# endif
-#endif
-  if (error_print_progname)
-    (*error_print_progname) ();
-  else
-    {
-#if _LIBC && USE_IN_LIBIO
-      if (_IO_fwide (stderr, 0) > 0)
-	__fwprintf (stderr, L"%s: ", program_name);
-      else
-#endif
-	fprintf (stderr, "%s:", program_name);
-    }
-
-  if (file_name != NULL)
-    {
-#if _LIBC && USE_IN_LIBIO
-      if (_IO_fwide (stderr, 0) > 0)
-	__fwprintf (stderr, L"%s:%d: ", file_name, line_number);
-      else
-#endif
-	fprintf (stderr, "%s:%d: ", file_name, line_number);
-    }
-
-#ifdef VA_START
-  VA_START (args, message);
-  error_tail (status, errnum, message, args);
-#else
-  fprintf (stderr, message, a1, a2, a3, a4, a5, a6, a7, a8);
-
-  ++error_message_count;
-  if (errnum)
-    print_errno_message (errnum);
-  putc ('\n', stderr);
-  fflush (stderr);
-  if (status)
-    exit (status);
-#endif
-
-#ifdef _LIBC
-# ifdef USE_IN_LIBIO
-  _IO_funlockfile (stderr);
-# else
-  __funlockfile (stderr);
-# endif
-#endif
-}
-
-#ifdef _LIBC
-/* Make the weak alias.  */
-# undef error
-# undef error_at_line
-weak_alias (__error, error)
-weak_alias (__error_at_line, error_at_line)
-#endif

lib/exclude.c

@@ -1,267 +0,0 @@
-/* exclude.c -- exclude file names
-
-   Copyright (C) 1992, 1993, 1994, 1997, 1999, 2000, 2001, 2002, 2003 Free
-   Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; see the file COPYING.
-   If not, write to the Free Software Foundation,
-   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by Paul Eggert <eggert@twinsun.com>  */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdbool.h>
-
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-#include <stddef.h>
-#include <stdio.h>
-#if HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-#if HAVE_STRING_H
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-#  include <stdint.h>
-# endif
-#endif
-
-#include "exclude.h"
-#include "fnmatch.h"
-#include "unlocked-io.h"
-#include "xalloc.h"
-
-#ifndef SIZE_MAX
-# define SIZE_MAX ((size_t) -1)
-#endif
-
-/* Verify a requirement at compile-time (unlike assert, which is runtime).  */
-#define verify(name, assertion) struct name { char a[(assertion) ? 1 : -1]; }
-
-/* Non-GNU systems lack these options, so we don't need to check them.  */
-#ifndef FNM_CASEFOLD
-# define FNM_CASEFOLD 0
-#endif
-#ifndef FNM_LEADING_DIR
-# define FNM_LEADING_DIR 0
-#endif
-
-verify (EXCLUDE_macros_do_not_collide_with_FNM_macros,
-	(((EXCLUDE_ANCHORED | EXCLUDE_INCLUDE | EXCLUDE_WILDCARDS)
-	  & (FNM_PATHNAME | FNM_NOESCAPE | FNM_PERIOD | FNM_LEADING_DIR
-	     | FNM_CASEFOLD))
-	 == 0));
-
-/* An exclude pattern-options pair.  The options are fnmatch options
-   ORed with EXCLUDE_* options.  */
-
-struct patopts
-  {
-    char const *pattern;
-    int options;
-  };
-
-/* An exclude list, of pattern-options pairs.  */
-
-struct exclude
-  {
-    struct patopts *exclude;
-    size_t exclude_alloc;
-    size_t exclude_count;
-  };
-
-/* Return a newly allocated and empty exclude list.  */
-
-struct exclude *
-new_exclude (void)
-{
-  struct exclude *ex = xmalloc (sizeof *ex);
-  ex->exclude_count = 0;
-  ex->exclude_alloc = (1 << 6); /* This must be a power of 2.  */
-  ex->exclude = xmalloc (ex->exclude_alloc * sizeof ex->exclude[0]);
-  return ex;
-}
-
-/* Free the storage associated with an exclude list.  */
-
-void
-free_exclude (struct exclude *ex)
-{
-  free (ex->exclude);
-  free (ex);
-}
-
-/* Return zero if PATTERN matches F, obeying OPTIONS, except that
-   (unlike fnmatch) wildcards are disabled in PATTERN.  */
-
-static int
-fnmatch_no_wildcards (char const *pattern, char const *f, int options)
-{
-  if (! (options & FNM_LEADING_DIR))
-    return ((options & FNM_CASEFOLD)
-	    ? strcasecmp (pattern, f)
-	    : strcmp (pattern, f));
-  else
-    {
-      size_t patlen = strlen (pattern);
-      int r = ((options & FNM_CASEFOLD)
-		? strncasecmp (pattern, f, patlen)
-		: strncmp (pattern, f, patlen));
-      if (! r)
-	{
-	  r = f[patlen];
-	  if (r == '/')
-	    r = 0;
-	}
-      return r;
-    }
-}
-
-/* Return true if EX excludes F.  */
-
-bool
-excluded_filename (struct exclude const *ex, char const *f)
-{
-  size_t exclude_count = ex->exclude_count;
-
-  /* If no options are given, the default is to include.  */
-  if (exclude_count == 0)
-    return false;
-  else
-    {
-      struct patopts const *exclude = ex->exclude;
-      size_t i;
-
-      /* Otherwise, the default is the opposite of the first option.  */
-      bool excluded = !! (exclude[0].options & EXCLUDE_INCLUDE);
-
-      /* Scan through the options, seeing whether they change F from
-	 excluded to included or vice versa.  */
-      for (i = 0;  i < exclude_count;  i++)
-	{
-	  char const *pattern = exclude[i].pattern;
-	  int options = exclude[i].options;
-	  if (excluded == !! (options & EXCLUDE_INCLUDE))
-	    {
-	      int (*matcher) (char const *, char const *, int) =
-		(options & EXCLUDE_WILDCARDS
-		 ? fnmatch
-		 : fnmatch_no_wildcards);
-	      bool matched = ((*matcher) (pattern, f, options) == 0);
-	      char const *p;
-
-	      if (! (options & EXCLUDE_ANCHORED))
-		for (p = f; *p && ! matched; p++)
-		  if (*p == '/' && p[1] != '/')
-		    matched = ((*matcher) (pattern, p + 1, options) == 0);
-
-	      excluded ^= matched;
-	    }
-	}
-
-      return excluded;
-    }
-}
-
-/* Append to EX the exclusion PATTERN with OPTIONS.  */
-
-void
-add_exclude (struct exclude *ex, char const *pattern, int options)
-{
-  struct patopts *patopts;
-
-  if (ex->exclude_alloc <= ex->exclude_count)
-    {
-      size_t s = 2 * ex->exclude_alloc;
-      if (! (0 < s && s <= SIZE_MAX / sizeof ex->exclude[0]))
-	xalloc_die ();
-      ex->exclude_alloc = s;
-      ex->exclude = xrealloc (ex->exclude, s * sizeof ex->exclude[0]);
-    }
-
-  patopts = &ex->exclude[ex->exclude_count++];
-  patopts->pattern = pattern;
-  patopts->options = options;
-}
-
-/* Use ADD_FUNC to append to EX the patterns in FILENAME, each with
-   OPTIONS.  LINE_END terminates each pattern in the file.  Return -1
-   on failure, 0 on success.  */
-
-int
-add_exclude_file (void (*add_func) (struct exclude *, char const *, int),
-		  struct exclude *ex, char const *filename, int options,
-		  char line_end)
-{
-  bool use_stdin = filename[0] == '-' && !filename[1];
-  FILE *in;
-  char *buf;
-  char *p;
-  char const *pattern;
-  char const *lim;
-  size_t buf_alloc = (1 << 10);  /* This must be a power of two.  */
-  size_t buf_count = 0;
-  int c;
-  int e = 0;
-
-  if (use_stdin)
-    in = stdin;
-  else if (! (in = fopen (filename, "r")))
-    return -1;
-
-  buf = xmalloc (buf_alloc);
-
-  while ((c = getc (in)) != EOF)
-    {
-      buf[buf_count++] = c;
-      if (buf_count == buf_alloc)
-	{
-	  buf_alloc *= 2;
-	  if (! buf_alloc)
-	    xalloc_die ();
-	  buf = xrealloc (buf, buf_alloc);
-	}
-    }
-
-  if (ferror (in))
-    e = errno;
-
-  if (!use_stdin && fclose (in) != 0)
-    e = errno;
-
-  buf = xrealloc (buf, buf_count + 1);
-
-  for (pattern = p = buf, lim = buf + buf_count;  p <= lim;  p++)
-    if (p < lim ? *p == line_end : buf < p && p[-1])
-      {
-	*p = '\0';
-	(*add_func) (ex, pattern, options);
-	pattern = p + 1;
-      }
-
-  errno = e;
-  return e ? -1 : 0;
-}

lib/exclude.h

@@ -1,43 +0,0 @@
-/* exclude.h -- declarations for excluding file names
-
-   Copyright (C) 1992, 1993, 1994, 1997, 1999, 2001, 2002, 2003 Free
-   Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; see the file COPYING.
-   If not, write to the Free Software Foundation,
-   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by Paul Eggert <eggert@twinsun.com>  */
-
-/* Exclude options, which can be ORed with fnmatch options.  */
-
-/* Patterns must match the start of file names, instead of matching
-   anywhere after a '/'.  */
-#define EXCLUDE_ANCHORED (1 << 30)
-
-/* Include instead of exclude.  */
-#define EXCLUDE_INCLUDE (1 << 29)
-
-/* '?', '*', '[', and '\\' are special in patterns.  Without this
-   option, these characters are ordinary and fnmatch is not used.  */
-#define EXCLUDE_WILDCARDS (1 << 28)
-
-struct exclude;
-
-struct exclude *new_exclude (void);
-void free_exclude (struct exclude *);
-void add_exclude (struct exclude *, char const *, int);
-int add_exclude_file (void (*) (struct exclude *, char const *, int),
-		      struct exclude *, char const *, int, char);
-bool excluded_filename (struct exclude const *, char const *);

lib/fnmatch.c

@@ -1,385 +0,0 @@
-/* Copyright (C) 1991, 1992, 1993, 1996, 1997, 1998, 1999, 2000, 2001,
-   2002 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-/* Enable GNU extensions in fnmatch.h.  */
-#ifndef _GNU_SOURCE
-# define _GNU_SOURCE	1
-#endif
-
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-# define HAVE_ALLOCA 1
-#else
-# if defined HAVE_ALLOCA_H || defined _LIBC
-#  include <alloca.h>
-# else
-#  ifdef _AIX
- #  pragma alloca
-#  else
-#   ifndef alloca
-char *alloca ();
-#   endif
-#  endif
-# endif
-#endif
-
-#if ! defined __builtin_expect && __GNUC__ < 3
-# define __builtin_expect(expr, expected) (expr)
-#endif
-
-#include <assert.h>
-#include <errno.h>
-#include <fnmatch.h>
-#include <ctype.h>
-
-#if HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# if HAVE_STRINGS_H
-#  include <strings.h>
-# endif
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stddef.h>
-# include <stdlib.h>
-#endif
-
-#define WIDE_CHAR_SUPPORT (HAVE_WCTYPE_H && HAVE_WCHAR_H && HAVE_BTOWC)
-
-/* For platform which support the ISO C amendement 1 functionality we
-   support user defined character classes.  */
-#if defined _LIBC || WIDE_CHAR_SUPPORT
-/* Solaris 2.5 has a bug: <wchar.h> must be included before <wctype.h>.  */
-# include <wchar.h>
-# include <wctype.h>
-#endif
-
-/* We need some of the locale data (the collation sequence information)
-   but there is no interface to get this information in general.  Therefore
-   we support a correct implementation only in glibc.  */
-#ifdef _LIBC
-# include "../locale/localeinfo.h"
-# include "../locale/elem-hash.h"
-# include "../locale/coll-lookup.h"
-# include <shlib-compat.h>
-
-# define CONCAT(a,b) __CONCAT(a,b)
-# define mbsinit __mbsinit
-# define mbsrtowcs __mbsrtowcs
-# define fnmatch __fnmatch
-extern int fnmatch (const char *pattern, const char *string, int flags);
-#endif
-
-/* We often have to test for FNM_FILE_NAME and FNM_PERIOD being both set.  */
-#define NO_LEADING_PERIOD(flags) \
-  ((flags & (FNM_FILE_NAME | FNM_PERIOD)) == (FNM_FILE_NAME | FNM_PERIOD))
-
-/* Comment out all this code if we are using the GNU C Library, are not
-   actually compiling the library itself, and have not detected a bug
-   in the library.  This code is part of the GNU C
-   Library, but also included in many other GNU distributions.  Compiling
-   and linking in this code is a waste when using the GNU C library
-   (especially if it is a shared library).  Rather than having every GNU
-   program understand `configure --with-gnu-libc' and omit the object files,
-   it is simpler to just do this in the source for each such file.  */
-
-#if defined _LIBC || !defined __GNU_LIBRARY__ || !HAVE_FNMATCH_GNU
-
-
-# if defined STDC_HEADERS || !defined isascii
-#  define ISASCII(c) 1
-# else
-#  define ISASCII(c) isascii(c)
-# endif
-
-# ifdef isblank
-#  define ISBLANK(c) (ISASCII (c) && isblank (c))
-# else
-#  define ISBLANK(c) ((c) == ' ' || (c) == '\t')
-# endif
-# ifdef isgraph
-#  define ISGRAPH(c) (ISASCII (c) && isgraph (c))
-# else
-#  define ISGRAPH(c) (ISASCII (c) && isprint (c) && !isspace (c))
-# endif
-
-# define ISPRINT(c) (ISASCII (c) && isprint (c))
-# define ISDIGIT(c) (ISASCII (c) && isdigit (c))
-# define ISALNUM(c) (ISASCII (c) && isalnum (c))
-# define ISALPHA(c) (ISASCII (c) && isalpha (c))
-# define ISCNTRL(c) (ISASCII (c) && iscntrl (c))
-# define ISLOWER(c) (ISASCII (c) && islower (c))
-# define ISPUNCT(c) (ISASCII (c) && ispunct (c))
-# define ISSPACE(c) (ISASCII (c) && isspace (c))
-# define ISUPPER(c) (ISASCII (c) && isupper (c))
-# define ISXDIGIT(c) (ISASCII (c) && isxdigit (c))
-
-# define STREQ(s1, s2) ((strcmp (s1, s2) == 0))
-
-# if defined _LIBC || WIDE_CHAR_SUPPORT
-/* The GNU C library provides support for user-defined character classes
-   and the functions from ISO C amendement 1.  */
-#  ifdef CHARCLASS_NAME_MAX
-#   define CHAR_CLASS_MAX_LENGTH CHARCLASS_NAME_MAX
-#  else
-/* This shouldn't happen but some implementation might still have this
-   problem.  Use a reasonable default value.  */
-#   define CHAR_CLASS_MAX_LENGTH 256
-#  endif
-
-#  ifdef _LIBC
-#   define IS_CHAR_CLASS(string) __wctype (string)
-#  else
-#   define IS_CHAR_CLASS(string) wctype (string)
-#  endif
-
-#  ifdef _LIBC
-#   define ISWCTYPE(WC, WT)	__iswctype (WC, WT)
-#  else
-#   define ISWCTYPE(WC, WT)	iswctype (WC, WT)
-#  endif
-
-#  if (HAVE_MBSTATE_T && HAVE_MBSRTOWCS) || _LIBC
-/* In this case we are implementing the multibyte character handling.  */
-#   define HANDLE_MULTIBYTE	1
-#  endif
-
-# else
-#  define CHAR_CLASS_MAX_LENGTH  6 /* Namely, `xdigit'.  */
-
-#  define IS_CHAR_CLASS(string)						      \
-   (STREQ (string, "alpha") || STREQ (string, "upper")			      \
-    || STREQ (string, "lower") || STREQ (string, "digit")		      \
-    || STREQ (string, "alnum") || STREQ (string, "xdigit")		      \
-    || STREQ (string, "space") || STREQ (string, "print")		      \
-    || STREQ (string, "punct") || STREQ (string, "graph")		      \
-    || STREQ (string, "cntrl") || STREQ (string, "blank"))
-# endif
-
-/* Avoid depending on library functions or files
-   whose names are inconsistent.  */
-
-# if !defined _LIBC && !defined getenv && !HAVE_DECL_GETENV
-extern char *getenv ();
-# endif
-
-# ifndef errno
-extern int errno;
-# endif
-
-/* Global variable.  */
-static int posixly_correct;
-
-# ifndef internal_function
-/* Inside GNU libc we mark some function in a special way.  In other
-   environments simply ignore the marking.  */
-#  define internal_function
-# endif
-
-/* Note that this evaluates C many times.  */
-# ifdef _LIBC
-#  define FOLD(c) ((flags & FNM_CASEFOLD) ? tolower (c) : (c))
-# else
-#  define FOLD(c) ((flags & FNM_CASEFOLD) && ISUPPER (c) ? tolower (c) : (c))
-# endif
-# define CHAR	char
-# define UCHAR	unsigned char
-# define INT	int
-# define FCT	internal_fnmatch
-# define EXT	ext_match
-# define END	end_pattern
-# define L(CS)	CS
-# ifdef _LIBC
-#  define BTOWC(C)	__btowc (C)
-# else
-#  define BTOWC(C)	btowc (C)
-# endif
-# define STRLEN(S) strlen (S)
-# define STRCAT(D, S) strcat (D, S)
-# ifdef _LIBC
-#  define MEMPCPY(D, S, N) __mempcpy (D, S, N)
-# else
-#  if HAVE_MEMPCPY
-#   define MEMPCPY(D, S, N) mempcpy (D, S, N)
-#  else
-#   define MEMPCPY(D, S, N) ((void *) ((char *) memcpy (D, S, N) + (N)))
-#  endif
-# endif
-# define MEMCHR(S, C, N) memchr (S, C, N)
-# define STRCOLL(S1, S2) strcoll (S1, S2)
-# include "fnmatch_loop.c"
-
-
-# if HANDLE_MULTIBYTE
-#  define FOLD(c) ((flags & FNM_CASEFOLD) ? towlower (c) : (c))
-#  define CHAR	wchar_t
-#  define UCHAR	wint_t
-#  define INT	wint_t
-#  define FCT	internal_fnwmatch
-#  define EXT	ext_wmatch
-#  define END	end_wpattern
-#  define L(CS)	L##CS
-#  define BTOWC(C)	(C)
-#  ifdef _LIBC
-#   define STRLEN(S) __wcslen (S)
-#   define STRCAT(D, S) __wcscat (D, S)
-#   define MEMPCPY(D, S, N) __wmempcpy (D, S, N)
-#  else
-#   define STRLEN(S) wcslen (S)
-#   define STRCAT(D, S) wcscat (D, S)
-#   if HAVE_WMEMPCPY
-#    define MEMPCPY(D, S, N) wmempcpy (D, S, N)
-#   else
-#    define MEMPCPY(D, S, N) (wmemcpy (D, S, N) + (N))
-#   endif
-#  endif
-#  define MEMCHR(S, C, N) wmemchr (S, C, N)
-#  define STRCOLL(S1, S2) wcscoll (S1, S2)
-#  define WIDE_CHAR_VERSION 1
-
-#  undef IS_CHAR_CLASS
-/* We have to convert the wide character string in a multibyte string.  But
-   we know that the character class names consist of alphanumeric characters
-   from the portable character set, and since the wide character encoding
-   for a member of the portable character set is the same code point as
-   its single-byte encoding, we can use a simplified method to convert the
-   string to a multibyte character string.  */
-static wctype_t
-is_char_class (const wchar_t *wcs)
-{
-  char s[CHAR_CLASS_MAX_LENGTH + 1];
-  char *cp = s;
-
-  do
-    {
-      /* Test for a printable character from the portable character set.  */
-#  ifdef _LIBC
-      if (*wcs < 0x20 || *wcs > 0x7e
-	  || *wcs == 0x24 || *wcs == 0x40 || *wcs == 0x60)
-	return (wctype_t) 0;
-#  else
-      switch (*wcs)
-	{
-	case L' ': case L'!': case L'"': case L'#': case L'%':
-	case L'&': case L'\'': case L'(': case L')': case L'*':
-	case L'+': case L',': case L'-': case L'.': case L'/':
-	case L'0': case L'1': case L'2': case L'3': case L'4':
-	case L'5': case L'6': case L'7': case L'8': case L'9':
-	case L':': case L';': case L'<': case L'=': case L'>':
-	case L'?':
-	case L'A': case L'B': case L'C': case L'D': case L'E':
-	case L'F': case L'G': case L'H': case L'I': case L'J':
-	case L'K': case L'L': case L'M': case L'N': case L'O':
-	case L'P': case L'Q': case L'R': case L'S': case L'T':
-	case L'U': case L'V': case L'W': case L'X': case L'Y':
-	case L'Z':
-	case L'[': case L'\\': case L']': case L'^': case L'_':
-	case L'a': case L'b': case L'c': case L'd': case L'e':
-	case L'f': case L'g': case L'h': case L'i': case L'j':
-	case L'k': case L'l': case L'm': case L'n': case L'o':
-	case L'p': case L'q': case L'r': case L's': case L't':
-	case L'u': case L'v': case L'w': case L'x': case L'y':
-	case L'z': case L'{': case L'|': case L'}': case L'~':
-	  break;
-	default:
-	  return (wctype_t) 0;
-	}
-#  endif
-
-      /* Avoid overrunning the buffer.  */
-      if (cp == s + CHAR_CLASS_MAX_LENGTH)
-	return (wctype_t) 0;
-
-      *cp++ = (char) *wcs++;
-    }
-  while (*wcs != L'\0');
-
-  *cp = '\0';
-
-#  ifdef _LIBC
-  return __wctype (s);
-#  else
-  return wctype (s);
-#  endif
-}
-#  define IS_CHAR_CLASS(string) is_char_class (string)
-
-#  include "fnmatch_loop.c"
-# endif
-
-
-int
-fnmatch (pattern, string, flags)
-     const char *pattern;
-     const char *string;
-     int flags;
-{
-# if HANDLE_MULTIBYTE
-  if (__builtin_expect (MB_CUR_MAX, 1) != 1)
-    {
-      mbstate_t ps;
-      size_t n;
-      wchar_t *wpattern;
-      wchar_t *wstring;
-
-      /* Convert the strings into wide characters.  */
-      memset (&ps, '\0', sizeof (ps));
-      n = mbsrtowcs (NULL, &pattern, 0, &ps);
-      if (__builtin_expect (n, 0) == (size_t) -1)
-	/* Something wrong.
-	   XXX Do we have to set `errno' to something which mbsrtows hasn't
-	   already done?  */
-	return -1;
-      wpattern = (wchar_t *) alloca ((n + 1) * sizeof (wchar_t));
-      assert (mbsinit (&ps));
-      (void) mbsrtowcs (wpattern, &pattern, n + 1, &ps);
-
-      assert (mbsinit (&ps));
-      n = mbsrtowcs (NULL, &string, 0, &ps);
-      if (__builtin_expect (n, 0) == (size_t) -1)
-	/* Something wrong.
-	   XXX Do we have to set `errno' to something which mbsrtows hasn't
-	   already done?  */
-	return -1;
-      wstring = (wchar_t *) alloca ((n + 1) * sizeof (wchar_t));
-      assert (mbsinit (&ps));
-      (void) mbsrtowcs (wstring, &string, n + 1, &ps);
-
-      return internal_fnwmatch (wpattern, wstring, wstring + n,
-				flags & FNM_PERIOD, flags);
-    }
-# endif  /* mbstate_t and mbsrtowcs or _LIBC.  */
-
-  return internal_fnmatch (pattern, string, string + strlen (string),
-			   flags & FNM_PERIOD, flags);
-}
-
-# ifdef _LIBC
-#  undef fnmatch
-versioned_symbol (libc, __fnmatch, fnmatch, GLIBC_2_2_3);
-#  if SHLIB_COMPAT(libc, GLIBC_2_0, GLIBC_2_2_3)
-strong_alias (__fnmatch, __fnmatch_old)
-compat_symbol (libc, __fnmatch_old, fnmatch, GLIBC_2_0);
-#  endif
-# endif
-
-#endif	/* _LIBC or not __GNU_LIBRARY__.  */

lib/fnmatch.hin

@@ -1,84 +0,0 @@
-/* Copyright (C) 1991, 92, 93, 96, 97, 98 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-#ifndef	_FNMATCH_H
-#define	_FNMATCH_H	1
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-#if defined __cplusplus || (defined __STDC__ && __STDC__) || defined WINDOWS32
-# if !defined __GLIBC__ || !defined __P
-#  undef	__P
-#  define __P(protos)	protos
-# endif
-#else /* Not C++ or ANSI C.  */
-# undef	__P
-# define __P(protos)	()
-/* We can get away without defining `const' here only because in this file
-   it is used only inside the prototype for `fnmatch', which is elided in
-   non-ANSI C where `const' is problematical.  */
-#endif /* C++ or ANSI C.  */
-
-#ifndef const
-# if (defined __STDC__ && __STDC__) || defined __cplusplus
-#  define __const	const
-# else
-#  define __const
-# endif
-#endif
-
-/* We #undef these before defining them because some losing systems
-   (HP-UX A.08.07 for example) define these in <unistd.h>.  */
-#undef	FNM_PATHNAME
-#undef	FNM_NOESCAPE
-#undef	FNM_PERIOD
-
-/* Bits set in the FLAGS argument to `fnmatch'.  */
-#define	FNM_PATHNAME	(1 << 0) /* No wildcard can ever match `/'.  */
-#define	FNM_NOESCAPE	(1 << 1) /* Backslashes don't quote special chars.  */
-#define	FNM_PERIOD	(1 << 2) /* Leading `.' is matched only explicitly.  */
-
-#if !defined _POSIX_C_SOURCE || _POSIX_C_SOURCE < 2 || defined _GNU_SOURCE
-# define FNM_FILE_NAME	 FNM_PATHNAME	/* Preferred GNU name.  */
-# define FNM_LEADING_DIR (1 << 3)	/* Ignore `/...' after a match.  */
-# define FNM_CASEFOLD	 (1 << 4)	/* Compare without regard to case.  */
-#endif
-
-/* Value returned by `fnmatch' if STRING does not match PATTERN.  */
-#define	FNM_NOMATCH	1
-
-/* This value is returned if the implementation does not support
-   `fnmatch'.  Since this is not the case here it will never be
-   returned but the conformance test suites still require the symbol
-   to be defined.  */
-#ifdef _XOPEN_SOURCE
-# define FNM_NOSYS	(-1)
-#endif
-
-/* Match STRING against the filename pattern PATTERN,
-   returning zero if it matches, FNM_NOMATCH if not.  */
-extern int fnmatch __P ((__const char *__pattern, __const char *__string,
-			 int __flags));
-
-#ifdef	__cplusplus
-}
-#endif
-
-#endif /* fnmatch.h */

lib/fnmatch_loop.c

@@ -1,474 +0,0 @@
-/* Copyright (C) 1991-1993, 1996-1999, 2000 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   This library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   This library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with this library; see the file COPYING.LIB.  If not,
-   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* Match STRING against the filename pattern PATTERN, returning zero if
-   it matches, nonzero if not.  */
-static int FCT (const CHAR *pattern, const CHAR *string,
-		int no_leading_period, int flags) internal_function;
-
-static int
-internal_function
-FCT (pattern, string, no_leading_period, flags)
-     const CHAR *pattern;
-     const CHAR *string;
-     int no_leading_period;
-     int flags;
-{
-  register const CHAR *p = pattern, *n = string;
-  register UCHAR c;
-#ifdef _LIBC
-  const UCHAR *collseq = (const UCHAR *)
-    _NL_CURRENT(LC_COLLATE, CONCAT(_NL_COLLATE_COLLSEQ,SUFFIX));
-# ifdef WIDE_CHAR_VERSION
-  const wint_t *names = (const wint_t *)
-    _NL_CURRENT (LC_COLLATE, _NL_COLLATE_NAMES);
-  size_t size = _NL_CURRENT_WORD (LC_COLLATE, _NL_COLLATE_HASH_SIZE);
-  size_t layers = _NL_CURRENT_WORD (LC_COLLATE, _NL_COLLATE_HASH_LAYERS);
-# endif
-#endif
-
-  while ((c = *p++) != L('\0'))
-    {
-      c = FOLD (c);
-
-      switch (c)
-	{
-	case L('?'):
-	  if (*n == L('\0'))
-	    return FNM_NOMATCH;
-	  else if (*n == L('/') && (flags & FNM_FILE_NAME))
-	    return FNM_NOMATCH;
-	  else if (*n == L('.') && no_leading_period
-		   && (n == string
-		       || (n[-1] == L('/') && (flags & FNM_FILE_NAME))))
-	    return FNM_NOMATCH;
-	  break;
-
-	case L('\\'):
-	  if (!(flags & FNM_NOESCAPE))
-	    {
-	      c = *p++;
-	      if (c == L('\0'))
-		/* Trailing \ loses.  */
-		return FNM_NOMATCH;
-	      c = FOLD (c);
-	    }
-	  if (FOLD ((UCHAR) *n) != c)
-	    return FNM_NOMATCH;
-	  break;
-
-	case L('*'):
-	  if (*n == L('.') && no_leading_period
-	      && (n == string
-		  || (n[-1] == L('/') && (flags & FNM_FILE_NAME))))
-	    return FNM_NOMATCH;
-
-	  for (c = *p++; c == L('?') || c == L('*'); c = *p++)
-	    {
-	      if (*n == L('/') && (flags & FNM_FILE_NAME))
-		/* A slash does not match a wildcard under FNM_FILE_NAME.  */
-		return FNM_NOMATCH;
-	      else if (c == L('?'))
-		{
-		  /* A ? needs to match one character.  */
-		  if (*n == L('\0'))
-		    /* There isn't another character; no match.  */
-		    return FNM_NOMATCH;
-		  else
-		    /* One character of the string is consumed in matching
-		       this ? wildcard, so *??? won't match if there are
-		       less than three characters.  */
-		    ++n;
-		}
-	    }
-
-	  if (c == L('\0'))
-	    /* The wildcard(s) is/are the last element of the pattern.
-	       If the name is a file name and contains another slash
-	       this does mean it cannot match.  If the FNM_LEADING_DIR
-	       flag is set and exactly one slash is following, we have
-	       a match.  */
-	    {
-	      int result = (flags & FNM_FILE_NAME) == 0 ? 0 : FNM_NOMATCH;
-
-	      if (flags & FNM_FILE_NAME)
-		{
-		  const CHAR *slashp = STRCHR (n, L('/'));
-
-		  if (flags & FNM_LEADING_DIR)
-		    {
-		      if (slashp != NULL
-			  && STRCHR (slashp + 1, L('/')) == NULL)
-			result = 0;
-		    }
-		  else
-		    {
-		      if (slashp == NULL)
-			result = 0;
-		    }
-		}
-
-	      return result;
-	    }
-	  else
-	    {
-	      const CHAR *endp;
-
-	      endp = STRCHRNUL (n, (flags & FNM_FILE_NAME) ? L('/') : L('\0'));
-
-	      if (c == L('['))
-		{
-		  int flags2 = ((flags & FNM_FILE_NAME)
-				? flags : (flags & ~FNM_PERIOD));
-
-		  for (--p; n < endp; ++n)
-		    if (FCT (p, n, (no_leading_period
-				    && (n == string
-					|| (n[-1] == L('/')
-					    && (flags & FNM_FILE_NAME)))),
-			     flags2) == 0)
-		      return 0;
-		}
-	      else if (c == L('/') && (flags & FNM_FILE_NAME))
-		{
-		  while (*n != L('\0') && *n != L('/'))
-		    ++n;
-		  if (*n == L('/')
-		      && (FCT (p, n + 1, flags & FNM_PERIOD, flags) == 0))
-		    return 0;
-		}
-	      else
-		{
-		  int flags2 = ((flags & FNM_FILE_NAME)
-				? flags : (flags & ~FNM_PERIOD));
-
-		  if (c == L('\\') && !(flags & FNM_NOESCAPE))
-		    c = *p;
-		  c = FOLD (c);
-		  for (--p; n < endp; ++n)
-		    if (FOLD ((UCHAR) *n) == c
-			&& (FCT (p, n, (no_leading_period
-					&& (n == string
-					    || (n[-1] == L('/')
-						&& (flags & FNM_FILE_NAME)))),
-				 flags2) == 0))
-		      return 0;
-		}
-	    }
-
-	  /* If we come here no match is possible with the wildcard.  */
-	  return FNM_NOMATCH;
-
-	case L('['):
-	  {
-	    /* Nonzero if the sense of the character class is inverted.  */
-	    static int posixly_correct;
-	    register int not;
-	    CHAR cold;
-
-	    if (posixly_correct == 0)
-	      posixly_correct = getenv ("POSIXLY_CORRECT") != NULL ? 1 : -1;
-
-	    if (*n == L('\0'))
-	      return FNM_NOMATCH;
-
-	    if (*n == L('.') && no_leading_period
-		&& (n == string
-		    || (n[-1] == L('/') && (flags & FNM_FILE_NAME))))
-	      return FNM_NOMATCH;
-
-	    if (*n == L('/') && (flags & FNM_FILE_NAME))
-	      /* `/' cannot be matched.  */
-	      return FNM_NOMATCH;
-
-	    not = (*p == L('!') || (posixly_correct < 0 && *p == L('^')));
-	    if (not)
-	      ++p;
-
-	    c = *p++;
-	    for (;;)
-	      {
-		UCHAR fn = FOLD ((UCHAR) *n);
-
-		if (!(flags & FNM_NOESCAPE) && c == L('\\'))
-		  {
-		    if (*p == L('\0'))
-		      return FNM_NOMATCH;
-		    c = FOLD ((UCHAR) *p);
-		    ++p;
-
-		    if (c == fn)
-		      goto matched;
-		  }
-		else if (c == L('[') && *p == L(':'))
-		  {
-		    /* Leave room for the null.  */
-		    CHAR str[CHAR_CLASS_MAX_LENGTH + 1];
-		    size_t c1 = 0;
-#if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
-		    wctype_t wt;
-#endif
-		    const CHAR *startp = p;
-
-		    for (;;)
-		      {
-			if (c1 == CHAR_CLASS_MAX_LENGTH)
-			  /* The name is too long and therefore the pattern
-			     is ill-formed.  */
-			  return FNM_NOMATCH;
-
-			c = *++p;
-			if (c == L(':') && p[1] == L(']'))
-			  {
-			    p += 2;
-			    break;
-			  }
-			if (c < L('a') || c >= L('z'))
-			  {
-			    /* This cannot possibly be a character class name.
-			       Match it as a normal range.  */
-			    p = startp;
-			    c = L('[');
-			    goto normal_bracket;
-			  }
-			str[c1++] = c;
-		      }
-		    str[c1] = L('\0');
-
-#if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
-		    wt = IS_CHAR_CLASS (str);
-		    if (wt == 0)
-		      /* Invalid character class name.  */
-		      return FNM_NOMATCH;
-
-		    if (ISWCTYPE (BTOWC ((UCHAR) *n), wt))
-		      goto matched;
-#else
-		    if ((STREQ (str, L("alnum")) && ISALNUM ((UCHAR) *n))
-			|| (STREQ (str, L("alpha")) && ISALPHA ((UCHAR) *n))
-			|| (STREQ (str, L("blank")) && ISBLANK ((UCHAR) *n))
-			|| (STREQ (str, L("cntrl")) && ISCNTRL ((UCHAR) *n))
-			|| (STREQ (str, L("digit")) && ISDIGIT ((UCHAR) *n))
-			|| (STREQ (str, L("graph")) && ISGRAPH ((UCHAR) *n))
-			|| (STREQ (str, L("lower")) && ISLOWER ((UCHAR) *n))
-			|| (STREQ (str, L("print")) && ISPRINT ((UCHAR) *n))
-			|| (STREQ (str, L("punct")) && ISPUNCT ((UCHAR) *n))
-			|| (STREQ (str, L("space")) && ISSPACE ((UCHAR) *n))
-			|| (STREQ (str, L("upper")) && ISUPPER ((UCHAR) *n))
-			|| (STREQ (str, L("xdigit")) && ISXDIGIT ((UCHAR) *n)))
-		      goto matched;
-#endif
-		  }
-		else if (c == L('\0'))
-		  /* [ (unterminated) loses.  */
-		  return FNM_NOMATCH;
-		else
-		  {
-		    c = FOLD (c);
-		  normal_bracket:
-		    if (c == fn)
-		      goto matched;
-
-		    cold = c;
-		    c = *p++;
-
-		    if (c == L('-') && *p != L(']'))
-		      {
-#if _LIBC
-			/* We have to find the collation sequence
-			   value for C.  Collation sequence is nothing
-			   we can regularly access.  The sequence
-			   value is defined by the order in which the
-			   definitions of the collation values for the
-			   various characters appear in the source
-			   file.  A strange concept, nowhere
-			   documented.  */
-			int32_t fseqidx;
-			int32_t lseqidx;
-			UCHAR cend = *p++;
-# ifdef WIDE_CHAR_VERSION
-			size_t cnt;
-# endif
-
-			if (!(flags & FNM_NOESCAPE) && cend == L('\\'))
-			  cend = *p++;
-			if (cend == L('\0'))
-			  return FNM_NOMATCH;
-
-# ifdef WIDE_CHAR_VERSION
-			/* Search in the `names' array for the characters.  */
-			fseqidx = fn % size;
-			cnt = 0;
-			while (names[fseqidx] != fn)
-			  {
-			    if (++cnt == layers)
-			      /* XXX We don't know anything about
-				 the character we are supposed to
-				 match.  This means we are failing.  */
-			      goto range_not_matched;
-
-			    fseqidx += size;
-			  }
-			lseqidx = cold % size;
-			cnt = 0;
-			while (names[lseqidx] != cold)
-			  {
-			    if (++cnt == layers)
-			      {
-				lseqidx = -1;
-				break;
-			      }
-			    lseqidx += size;
-			  }
-# else
-			fseqidx = fn;
-			lseqidx = cold;
-# endif
-
-			/* XXX It is not entirely clear to me how to handle
-			   characters which are not mentioned in the
-			   collation specification.  */
-			if (
-# ifdef WIDE_CHAR_VERSION
-			    lseqidx == -1 ||
-# endif
-			    collseq[lseqidx] <= collseq[fseqidx])
-			  {
-			    /* We have to look at the upper bound.  */
-			    int32_t hseqidx;
-
-			    cend = FOLD (cend);
-# ifdef WIDE_CHAR_VERSION
-			    hseqidx = cend % size;
-			    cnt = 0;
-			    while (names[hseqidx] != cend)
-			      {
-				if (++cnt == layers)
-				  {
-				    /* Hum, no information about the upper
-				       bound.  The matching succeeds if the
-				       lower bound is matched exactly.  */
-				    if (lseqidx == -1 || cold != fn)
-				      goto range_not_matched;
-
-				    goto matched;
-				  }
-			      }
-# else
-			    hseqidx = cend;
-# endif
-
-			    if (
-# ifdef WIDE_CHAR_VERSION
-				(lseqidx == -1
-				 && collseq[fseqidx] == collseq[hseqidx]) ||
-# endif
-				collseq[fseqidx] <= collseq[hseqidx])
-			      goto matched;
-			  }
-# ifdef WIDE_CHAR_VERSION
-		      range_not_matched:
-# endif
-#else
-			/* We use a boring value comparison of the character
-			   values.  This is better than comparing using
-			   `strcoll' since the latter would have surprising
-			   and sometimes fatal consequences.  */
-			UCHAR cend = *p++;
-
-			if (!(flags & FNM_NOESCAPE) && cend == L('\\'))
-			  cend = *p++;
-			if (cend == L('\0'))
-			  return FNM_NOMATCH;
-
-			/* It is a range.  */
-			if (cold <= fc && fc <= c)
-			  goto matched;
-#endif
-
-			c = *p++;
-		      }
-		  }
-
-		if (c == L(']'))
-		  break;
-	      }
-
-	    if (!not)
-	      return FNM_NOMATCH;
-	    break;
-
-	  matched:
-	    /* Skip the rest of the [...] that already matched.  */
-	    while (c != L(']'))
-	      {
-		if (c == L('\0'))
-		  /* [... (unterminated) loses.  */
-		  return FNM_NOMATCH;
-
-		c = *p++;
-		if (!(flags & FNM_NOESCAPE) && c == L('\\'))
-		  {
-		    if (*p == L('\0'))
-		      return FNM_NOMATCH;
-		    /* XXX 1003.2d11 is unclear if this is right.  */
-		    ++p;
-		  }
-		else if (c == L('[') && *p == L(':'))
-		  {
-		    do
-		      if (*++p == L('\0'))
-			return FNM_NOMATCH;
-		    while (*p != L(':') || p[1] == L(']'));
-		    p += 2;
-		    c = *p;
-		  }
-	      }
-	    if (not)
-	      return FNM_NOMATCH;
-	  }
-	  break;
-
-	default:
-	  if (c != FOLD ((UCHAR) *n))
-	    return FNM_NOMATCH;
-	}
-
-      ++n;
-    }
-
-  if (*n == '\0')
-    return 0;
-
-  if ((flags & FNM_LEADING_DIR) && *n == L('/'))
-    /* The FNM_LEADING_DIR flag says that "foo*" matches "foobar/frobozz".  */
-    return 0;
-
-  return FNM_NOMATCH;
-}
-
-#undef FOLD
-#undef CHAR
-#undef UCHAR
-#undef FCT
-#undef STRCHR
-#undef STRCHRNUL
-#undef STRCOLL
-#undef L
-#undef BTOWC
-#undef SUFFIX

lib/full-read.c

@@ -1,50 +0,0 @@
-/* full-read.c -- an interface to read that retries after interrupts
-   Copyright (C) 1993, 1994, 1997, 1999 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-   */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <sys/types.h>
-
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-
-/* Read LEN bytes at PTR from descriptor DESC, retrying if interrupted.
-   Return the actual number of bytes read, zero for EOF, or negative
-   for an error.  */
-
-ssize_t
-full_read (int desc, char *ptr, size_t len)
-{
-  for (;;)
-    {
-      ssize_t n = read (desc, ptr, len);
-#ifdef EINTR
-      if (n < 0 && errno == EINTR)
-	continue;
-#endif
-      return n;
-    }
-}

lib/full-write.c

@@ -1,85 +0,0 @@
-/* An interface to read and write that retries (if necessary) until complete.
-
-   Copyright (C) 1993, 1994, 1997-2003 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-/* Specification.  */
-#ifdef FULL_READ
-# include "full-read.h"
-#else
-# include "full-write.h"
-#endif
-
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-
-#ifdef FULL_READ
-# include "safe-read.h"
-# define safe_rw safe_read
-# define full_rw full_read
-# undef const
-# define const /* empty */
-#else
-# include "safe-write.h"
-# define safe_rw safe_write
-# define full_rw full_write
-#endif
-
-#ifdef FULL_READ
-/* Set errno to zero upon EOF.  */
-# define ZERO_BYTE_TRANSFER_ERRNO 0
-#else
-/* Some buggy drivers return 0 when one tries to write beyond
-   a device's end.  (Example: Linux 1.2.13 on /dev/fd0.)
-   Set errno to ENOSPC so they get a sensible diagnostic.  */
-# define ZERO_BYTE_TRANSFER_ERRNO ENOSPC
-#endif
-
-/* Write(read) COUNT bytes at BUF to(from) descriptor FD, retrying if
-   interrupted or if a partial write(read) occurs.  Return the number
-   of bytes transferred.
-   When writing, set errno if fewer than COUNT bytes are written.
-   When reading, if fewer than COUNT bytes are read, you must examine
-   errno to distinguish failure from EOF (errno == 0).  */
-size_t
-full_rw (int fd, const void *buf, size_t count)
-{
-  size_t total = 0;
-  const char *ptr = buf;
-
-  while (count > 0)
-    {
-      size_t n_rw = safe_rw (fd, ptr, count);
-      if (n_rw == (size_t) -1)
-	break;
-      if (n_rw == 0)
-	{
-	  errno = ZERO_BYTE_TRANSFER_ERRNO;
-	  break;
-	}
-      total += n_rw;
-      ptr += n_rw;
-      count -= n_rw;
-    }
-
-  return total;
-}

lib/full-write.h

@@ -1,24 +0,0 @@
-/* An interface to write() that writes all it is asked to write.
-
-   Copyright (C) 2002 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stddef.h>
-
-/* Write COUNT bytes at BUF to descriptor FD, retrying if interrupted
-   or if partial writes occur.  Return the number of bytes successfully
-   written, setting errno if that is less than COUNT.  */
-extern size_t full_write (int fd, const void *buf, size_t count);

lib/getdate.y

@@ -1,1114 +0,0 @@
-%{
-/* Parse a string into an internal time stamp.
-   Copyright (C) 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Originally written by Steven M. Bellovin <smb@research.att.com> while
-   at the University of North Carolina at Chapel Hill.  Later tweaked by
-   a couple of people on Usenet.  Completely overhauled by Rich $alz
-   <rsalz@bbn.com> and Jim Berets <jberets@bbn.com> in August, 1990.
-
-   Modified by Paul Eggert <eggert@twinsun.com> in August 1999 to do
-   the right thing about local DST.  Unlike previous versions, this
-   version is reentrant.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <alloca.h>
-
-/* Since the code of getdate.y is not included in the Emacs executable
-   itself, there is no need to #define static in this file.  Even if
-   the code were included in the Emacs executable, it probably
-   wouldn't do any harm to #undef it here; this will only cause
-   problems if we try to write to a static variable, which I don't
-   think this code needs to do.  */
-#ifdef emacs
-# undef static
-#endif
-
-#include <ctype.h>
-
-#if HAVE_STDLIB_H
-# include <stdlib.h> /* for `free'; used by Bison 1.27 */
-#endif
-
-#if STDC_HEADERS || (! defined isascii && ! HAVE_ISASCII)
-# define IN_CTYPE_DOMAIN(c) 1
-#else
-# define IN_CTYPE_DOMAIN(c) isascii (c)
-#endif
-
-#define ISSPACE(c) (IN_CTYPE_DOMAIN (c) && isspace (c))
-#define ISALPHA(c) (IN_CTYPE_DOMAIN (c) && isalpha (c))
-#define ISLOWER(c) (IN_CTYPE_DOMAIN (c) && islower (c))
-#define ISDIGIT_LOCALE(c) (IN_CTYPE_DOMAIN (c) && isdigit (c))
-
-/* ISDIGIT differs from ISDIGIT_LOCALE, as follows:
-   - Its arg may be any int or unsigned int; it need not be an unsigned char.
-   - It's guaranteed to evaluate its argument exactly once.
-   - It's typically faster.
-   POSIX says that only '0' through '9' are digits.  Prefer ISDIGIT to
-   ISDIGIT_LOCALE unless it's important to use the locale's definition
-   of `digit' even when the host does not conform to POSIX.  */
-#define ISDIGIT(c) ((unsigned) (c) - '0' <= 9)
-
-#if STDC_HEADERS || HAVE_STRING_H
-# include <string.h>
-#endif
-
-#if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) || __STRICT_ANSI__
-# define __attribute__(x)
-#endif
-
-#ifndef ATTRIBUTE_UNUSED
-# define ATTRIBUTE_UNUSED __attribute__ ((__unused__))
-#endif
-
-#define EPOCH_YEAR 1970
-#define TM_YEAR_BASE 1900
-
-#define HOUR(x) ((x) * 60)
-
-/* An integer value, and the number of digits in its textual
-   representation.  */
-typedef struct
-{
-  int value;
-  int digits;
-} textint;
-
-/* An entry in the lexical lookup table.  */
-typedef struct
-{
-  char const *name;
-  int type;
-  int value;
-} table;
-
-/* Meridian: am, pm, or 24-hour style.  */
-enum { MERam, MERpm, MER24 };
-
-/* Information passed to and from the parser.  */
-typedef struct
-{
-  /* The input string remaining to be parsed. */
-  const char *input;
-
-  /* N, if this is the Nth Tuesday.  */
-  int day_ordinal;
-
-  /* Day of week; Sunday is 0.  */
-  int day_number;
-
-  /* tm_isdst flag for the local zone.  */
-  int local_isdst;
-
-  /* Time zone, in minutes east of UTC.  */
-  int time_zone;
-
-  /* Style used for time.  */
-  int meridian;
-
-  /* Gregorian year, month, day, hour, minutes, and seconds.  */
-  textint year;
-  int month;
-  int day;
-  int hour;
-  int minutes;
-  int seconds;
-
-  /* Relative year, month, day, hour, minutes, and seconds.  */
-  int rel_year;
-  int rel_month;
-  int rel_day;
-  int rel_hour;
-  int rel_minutes;
-  int rel_seconds;
-
-  /* Counts of nonterminals of various flavors parsed so far.  */
-  int dates_seen;
-  int days_seen;
-  int local_zones_seen;
-  int rels_seen;
-  int times_seen;
-  int zones_seen;
-
-  /* Table of local time zone abbrevations, terminated by a null entry.  */
-  table local_time_zone_table[3];
-} parser_control;
-
-#define PC (* (parser_control *) parm)
-#define YYLEX_PARAM parm
-#define YYPARSE_PARAM parm
-
-static int yyerror ();
-static int yylex ();
-
-%}
-
-/* We want a reentrant parser.  */
-%pure_parser
-
-/* This grammar has 13 shift/reduce conflicts. */
-%expect 13
-
-%union
-{
-  int intval;
-  textint textintval;
-}
-
-%token tAGO tDST
-
-%token <intval> tDAY tDAY_UNIT tDAYZONE tHOUR_UNIT tLOCAL_ZONE tMERIDIAN
-%token <intval> tMINUTE_UNIT tMONTH tMONTH_UNIT tSEC_UNIT tYEAR_UNIT tZONE
-
-%token <textintval> tSNUMBER tUNUMBER
-
-%type <intval> o_merid
-
-%%
-
-spec:
-    /* empty */
-  | spec item
-  ;
-
-item:
-    time
-      { PC.times_seen++; }
-  | local_zone
-      { PC.local_zones_seen++; }
-  | zone
-      { PC.zones_seen++; }
-  | date
-      { PC.dates_seen++; }
-  | day
-      { PC.days_seen++; }
-  | rel
-      { PC.rels_seen++; }
-  | number
-  ;
-
-time:
-    tUNUMBER tMERIDIAN
-      {
-	PC.hour = $1.value;
-	PC.minutes = 0;
-	PC.seconds = 0;
-	PC.meridian = $2;
-      }
-  | tUNUMBER ':' tUNUMBER o_merid
-      {
-	PC.hour = $1.value;
-	PC.minutes = $3.value;
-	PC.seconds = 0;
-	PC.meridian = $4;
-      }
-  | tUNUMBER ':' tUNUMBER tSNUMBER
-      {
-	PC.hour = $1.value;
-	PC.minutes = $3.value;
-	PC.meridian = MER24;
-	PC.zones_seen++;
-	PC.time_zone = $4.value % 100 + ($4.value / 100) * 60;
-      }
-  | tUNUMBER ':' tUNUMBER ':' tUNUMBER o_merid
-      {
-	PC.hour = $1.value;
-	PC.minutes = $3.value;
-	PC.seconds = $5.value;
-	PC.meridian = $6;
-      }
-  | tUNUMBER ':' tUNUMBER ':' tUNUMBER tSNUMBER
-      {
-	PC.hour = $1.value;
-	PC.minutes = $3.value;
-	PC.seconds = $5.value;
-	PC.meridian = MER24;
-	PC.zones_seen++;
-	PC.time_zone = $6.value % 100 + ($6.value / 100) * 60;
-      }
-  ;
-
-local_zone:
-    tLOCAL_ZONE
-      { PC.local_isdst = $1; }
-  | tLOCAL_ZONE tDST
-      { PC.local_isdst = $1 < 0 ? 1 : $1 + 1; }
-  ;
-
-zone:
-    tZONE
-      { PC.time_zone = $1; }
-  | tDAYZONE
-      { PC.time_zone = $1 + 60; }
-  | tZONE tDST
-      { PC.time_zone = $1 + 60; }
-  ;
-
-day:
-    tDAY
-      {
-	PC.day_ordinal = 1;
-	PC.day_number = $1;
-      }
-  | tDAY ','
-      {
-	PC.day_ordinal = 1;
-	PC.day_number = $1;
-      }
-  | tUNUMBER tDAY
-      {
-	PC.day_ordinal = $1.value;
-	PC.day_number = $2;
-      }
-  ;
-
-date:
-    tUNUMBER '/' tUNUMBER
-      {
-	PC.month = $1.value;
-	PC.day = $3.value;
-      }
-  | tUNUMBER '/' tUNUMBER '/' tUNUMBER
-      {
-	/* Interpret as YYYY/MM/DD if the first value has 4 or more digits,
-	   otherwise as MM/DD/YY.
-	   The goal in recognizing YYYY/MM/DD is solely to support legacy
-	   machine-generated dates like those in an RCS log listing.  If
-	   you want portability, use the ISO 8601 format.  */
-	if (4 <= $1.digits)
-	  {
-	    PC.year = $1;
-	    PC.month = $3.value;
-	    PC.day = $5.value;
-	  }
-	else
-	  {
-	    PC.month = $1.value;
-	    PC.day = $3.value;
-	    PC.year = $5;
-	  }
-      }
-  | tUNUMBER tSNUMBER tSNUMBER
-      {
-	/* ISO 8601 format.  YYYY-MM-DD.  */
-	PC.year = $1;
-	PC.month = -$2.value;
-	PC.day = -$3.value;
-      }
-  | tUNUMBER tMONTH tSNUMBER
-      {
-	/* e.g. 17-JUN-1992.  */
-	PC.day = $1.value;
-	PC.month = $2;
-	PC.year.value = -$3.value;
-	PC.year.digits = $3.digits;
-      }
-  | tMONTH tUNUMBER
-      {
-	PC.month = $1;
-	PC.day = $2.value;
-      }
-  | tMONTH tUNUMBER ',' tUNUMBER
-      {
-	PC.month = $1;
-	PC.day = $2.value;
-	PC.year = $4;
-      }
-  | tUNUMBER tMONTH
-      {
-	PC.day = $1.value;
-	PC.month = $2;
-      }
-  | tUNUMBER tMONTH tUNUMBER
-      {
-	PC.day = $1.value;
-	PC.month = $2;
-	PC.year = $3;
-      }
-  ;
-
-rel:
-    relunit tAGO
-      {
-	PC.rel_seconds = -PC.rel_seconds;
-	PC.rel_minutes = -PC.rel_minutes;
-	PC.rel_hour = -PC.rel_hour;
-	PC.rel_day = -PC.rel_day;
-	PC.rel_month = -PC.rel_month;
-	PC.rel_year = -PC.rel_year;
-      }
-  | relunit
-  ;
-
-relunit:
-    tUNUMBER tYEAR_UNIT
-      { PC.rel_year += $1.value * $2; }
-  | tSNUMBER tYEAR_UNIT
-      { PC.rel_year += $1.value * $2; }
-  | tYEAR_UNIT
-      { PC.rel_year += $1; }
-  | tUNUMBER tMONTH_UNIT
-      { PC.rel_month += $1.value * $2; }
-  | tSNUMBER tMONTH_UNIT
-      { PC.rel_month += $1.value * $2; }
-  | tMONTH_UNIT
-      { PC.rel_month += $1; }
-  | tUNUMBER tDAY_UNIT
-      { PC.rel_day += $1.value * $2; }
-  | tSNUMBER tDAY_UNIT
-      { PC.rel_day += $1.value * $2; }
-  | tDAY_UNIT
-      { PC.rel_day += $1; }
-  | tUNUMBER tHOUR_UNIT
-      { PC.rel_hour += $1.value * $2; }
-  | tSNUMBER tHOUR_UNIT
-      { PC.rel_hour += $1.value * $2; }
-  | tHOUR_UNIT
-      { PC.rel_hour += $1; }
-  | tUNUMBER tMINUTE_UNIT
-      { PC.rel_minutes += $1.value * $2; }
-  | tSNUMBER tMINUTE_UNIT
-      { PC.rel_minutes += $1.value * $2; }
-  | tMINUTE_UNIT
-      { PC.rel_minutes += $1; }
-  | tUNUMBER tSEC_UNIT
-      { PC.rel_seconds += $1.value * $2; }
-  | tSNUMBER tSEC_UNIT
-      { PC.rel_seconds += $1.value * $2; }
-  | tSEC_UNIT
-      { PC.rel_seconds += $1; }
-  ;
-
-number:
-    tUNUMBER
-      {
-	if (PC.dates_seen
-	    && ! PC.rels_seen && (PC.times_seen || 2 < $1.digits))
-	  PC.year = $1;
-	else
-	  {
-	    if (4 < $1.digits)
-	      {
-		PC.dates_seen++;
-		PC.day = $1.value % 100;
-		PC.month = ($1.value / 100) % 100;
-		PC.year.value = $1.value / 10000;
-		PC.year.digits = $1.digits - 4;
-	      }
-	    else
-	      {
-		PC.times_seen++;
-		if ($1.digits <= 2)
-		  {
-		    PC.hour = $1.value;
-		    PC.minutes = 0;
-		  }
-		else
-		  {
-		    PC.hour = $1.value / 100;
-		    PC.minutes = $1.value % 100;
-		  }
-		PC.seconds = 0;
-		PC.meridian = MER24;
-	      }
-	  }
-      }
-  ;
-
-o_merid:
-    /* empty */
-      { $$ = MER24; }
-  | tMERIDIAN
-      { $$ = $1; }
-  ;
-
-%%
-
-/* Include this file down here because bison inserts code above which
-   may define-away `const'.  We want the prototype for get_date to have
-   the same signature as the function definition.  */
-#include "getdate.h"
-#include "unlocked-io.h"
-
-#ifndef gmtime
-struct tm *gmtime ();
-#endif
-#ifndef localtime
-struct tm *localtime ();
-#endif
-#ifndef mktime
-time_t mktime ();
-#endif
-
-static table const meridian_table[] =
-{
-  { "AM",   tMERIDIAN, MERam },
-  { "A.M.", tMERIDIAN, MERam },
-  { "PM",   tMERIDIAN, MERpm },
-  { "P.M.", tMERIDIAN, MERpm },
-  { 0, 0, 0 }
-};
-
-static table const dst_table[] =
-{
-  { "DST", tDST, 0 }
-};
-
-static table const month_and_day_table[] =
-{
-  { "JANUARY",	tMONTH,	 1 },
-  { "FEBRUARY",	tMONTH,	 2 },
-  { "MARCH",	tMONTH,	 3 },
-  { "APRIL",	tMONTH,	 4 },
-  { "MAY",	tMONTH,	 5 },
-  { "JUNE",	tMONTH,	 6 },
-  { "JULY",	tMONTH,	 7 },
-  { "AUGUST",	tMONTH,	 8 },
-  { "SEPTEMBER",tMONTH,	 9 },
-  { "SEPT",	tMONTH,	 9 },
-  { "OCTOBER",	tMONTH,	10 },
-  { "NOVEMBER",	tMONTH,	11 },
-  { "DECEMBER",	tMONTH,	12 },
-  { "SUNDAY",	tDAY,	 0 },
-  { "MONDAY",	tDAY,	 1 },
-  { "TUESDAY",	tDAY,	 2 },
-  { "TUES",	tDAY,	 2 },
-  { "WEDNESDAY",tDAY,	 3 },
-  { "WEDNES",	tDAY,	 3 },
-  { "THURSDAY",	tDAY,	 4 },
-  { "THUR",	tDAY,	 4 },
-  { "THURS",	tDAY,	 4 },
-  { "FRIDAY",	tDAY,	 5 },
-  { "SATURDAY",	tDAY,	 6 },
-  { 0, 0, 0 }
-};
-
-static table const time_units_table[] =
-{
-  { "YEAR",	tYEAR_UNIT,	 1 },
-  { "MONTH",	tMONTH_UNIT,	 1 },
-  { "FORTNIGHT",tDAY_UNIT,	14 },
-  { "WEEK",	tDAY_UNIT,	 7 },
-  { "DAY",	tDAY_UNIT,	 1 },
-  { "HOUR",	tHOUR_UNIT,	 1 },
-  { "MINUTE",	tMINUTE_UNIT,	 1 },
-  { "MIN",	tMINUTE_UNIT,	 1 },
-  { "SECOND",	tSEC_UNIT,	 1 },
-  { "SEC",	tSEC_UNIT,	 1 },
-  { 0, 0, 0 }
-};
-
-/* Assorted relative-time words. */
-static table const relative_time_table[] =
-{
-  { "TOMORROW",	tMINUTE_UNIT,	24 * 60 },
-  { "YESTERDAY",tMINUTE_UNIT,	- (24 * 60) },
-  { "TODAY",	tMINUTE_UNIT,	 0 },
-  { "NOW",	tMINUTE_UNIT,	 0 },
-  { "LAST",	tUNUMBER,	-1 },
-  { "THIS",	tUNUMBER,	 0 },
-  { "NEXT",	tUNUMBER,	 1 },
-  { "FIRST",	tUNUMBER,	 1 },
-/*{ "SECOND",	tUNUMBER,	 2 }, */
-  { "THIRD",	tUNUMBER,	 3 },
-  { "FOURTH",	tUNUMBER,	 4 },
-  { "FIFTH",	tUNUMBER,	 5 },
-  { "SIXTH",	tUNUMBER,	 6 },
-  { "SEVENTH",	tUNUMBER,	 7 },
-  { "EIGHTH",	tUNUMBER,	 8 },
-  { "NINTH",	tUNUMBER,	 9 },
-  { "TENTH",	tUNUMBER,	10 },
-  { "ELEVENTH",	tUNUMBER,	11 },
-  { "TWELFTH",	tUNUMBER,	12 },
-  { "AGO",	tAGO,		 1 },
-  { 0, 0, 0 }
-};
-
-/* The time zone table.  This table is necessarily incomplete, as time
-   zone abbreviations are ambiguous; e.g. Australians interpret "EST"
-   as Eastern time in Australia, not as US Eastern Standard Time.
-   You cannot rely on getdate to handle arbitrary time zone
-   abbreviations; use numeric abbreviations like `-0500' instead.  */
-static table const time_zone_table[] =
-{
-  { "GMT",	tZONE,     HOUR ( 0) },	/* Greenwich Mean */
-  { "UT",	tZONE,     HOUR ( 0) },	/* Universal (Coordinated) */
-  { "UTC",	tZONE,     HOUR ( 0) },
-  { "WET",	tZONE,     HOUR ( 0) },	/* Western European */
-  { "WEST",	tDAYZONE,  HOUR ( 0) },	/* Western European Summer */
-  { "BST",	tDAYZONE,  HOUR ( 0) },	/* British Summer */
-  { "ART",	tZONE,	  -HOUR ( 3) },	/* Argentina */
-  { "BRT",	tZONE,	  -HOUR ( 3) },	/* Brazil */
-  { "BRST",	tDAYZONE, -HOUR ( 3) },	/* Brazil Summer */
-  { "NST",	tZONE,	 -(HOUR ( 3) + 30) },	/* Newfoundland Standard */
-  { "NDT",	tDAYZONE,-(HOUR ( 3) + 30) },	/* Newfoundland Daylight */
-  { "AST",	tZONE,    -HOUR ( 4) },	/* Atlantic Standard */
-  { "ADT",	tDAYZONE, -HOUR ( 4) },	/* Atlantic Daylight */
-  { "CLT",	tZONE,    -HOUR ( 4) },	/* Chile */
-  { "CLST",	tDAYZONE, -HOUR ( 4) },	/* Chile Summer */
-  { "EST",	tZONE,    -HOUR ( 5) },	/* Eastern Standard */
-  { "EDT",	tDAYZONE, -HOUR ( 5) },	/* Eastern Daylight */
-  { "CST",	tZONE,    -HOUR ( 6) },	/* Central Standard */
-  { "CDT",	tDAYZONE, -HOUR ( 6) },	/* Central Daylight */
-  { "MST",	tZONE,    -HOUR ( 7) },	/* Mountain Standard */
-  { "MDT",	tDAYZONE, -HOUR ( 7) },	/* Mountain Daylight */
-  { "PST",	tZONE,    -HOUR ( 8) },	/* Pacific Standard */
-  { "PDT",	tDAYZONE, -HOUR ( 8) },	/* Pacific Daylight */
-  { "AKST",	tZONE,    -HOUR ( 9) },	/* Alaska Standard */
-  { "AKDT",	tDAYZONE, -HOUR ( 9) },	/* Alaska Daylight */
-  { "HST",	tZONE,    -HOUR (10) },	/* Hawaii Standard */
-  { "HAST",	tZONE,	  -HOUR (10) },	/* Hawaii-Aleutian Standard */
-  { "HADT",	tDAYZONE, -HOUR (10) },	/* Hawaii-Aleutian Daylight */
-  { "SST",	tZONE,    -HOUR (12) },	/* Samoa Standard */
-  { "WAT",	tZONE,     HOUR ( 1) },	/* West Africa */
-  { "CET",	tZONE,     HOUR ( 1) },	/* Central European */
-  { "CEST",	tDAYZONE,  HOUR ( 1) },	/* Central European Summer */
-  { "MET",	tZONE,     HOUR ( 1) },	/* Middle European */
-  { "MEZ",	tZONE,     HOUR ( 1) },	/* Middle European */
-  { "MEST",	tDAYZONE,  HOUR ( 1) },	/* Middle European Summer */
-  { "MESZ",	tDAYZONE,  HOUR ( 1) },	/* Middle European Summer */
-  { "EET",	tZONE,     HOUR ( 2) },	/* Eastern European */
-  { "EEST",	tDAYZONE,  HOUR ( 2) },	/* Eastern European Summer */
-  { "CAT",	tZONE,	   HOUR ( 2) },	/* Central Africa */
-  { "SAST",	tZONE,	   HOUR ( 2) },	/* South Africa Standard */
-  { "EAT",	tZONE,	   HOUR ( 3) },	/* East Africa */
-  { "MSK",	tZONE,	   HOUR ( 3) },	/* Moscow */
-  { "MSD",	tDAYZONE,  HOUR ( 3) },	/* Moscow Daylight */
-  { "IST",	tZONE,	  (HOUR ( 5) + 30) },	/* India Standard */
-  { "SGT",	tZONE,     HOUR ( 8) },	/* Singapore */
-  { "KST",	tZONE,     HOUR ( 9) },	/* Korea Standard */
-  { "JST",	tZONE,     HOUR ( 9) },	/* Japan Standard */
-  { "GST",	tZONE,     HOUR (10) },	/* Guam Standard */
-  { "NZST",	tZONE,     HOUR (12) },	/* New Zealand Standard */
-  { "NZDT",	tDAYZONE,  HOUR (12) },	/* New Zealand Daylight */
-  { 0, 0, 0  }
-};
-
-/* Military time zone table. */
-static table const military_table[] =
-{
-  { "A", tZONE,	-HOUR ( 1) },
-  { "B", tZONE,	-HOUR ( 2) },
-  { "C", tZONE,	-HOUR ( 3) },
-  { "D", tZONE,	-HOUR ( 4) },
-  { "E", tZONE,	-HOUR ( 5) },
-  { "F", tZONE,	-HOUR ( 6) },
-  { "G", tZONE,	-HOUR ( 7) },
-  { "H", tZONE,	-HOUR ( 8) },
-  { "I", tZONE,	-HOUR ( 9) },
-  { "K", tZONE,	-HOUR (10) },
-  { "L", tZONE,	-HOUR (11) },
-  { "M", tZONE,	-HOUR (12) },
-  { "N", tZONE,	 HOUR ( 1) },
-  { "O", tZONE,	 HOUR ( 2) },
-  { "P", tZONE,	 HOUR ( 3) },
-  { "Q", tZONE,	 HOUR ( 4) },
-  { "R", tZONE,	 HOUR ( 5) },
-  { "S", tZONE,	 HOUR ( 6) },
-  { "T", tZONE,	 HOUR ( 7) },
-  { "U", tZONE,	 HOUR ( 8) },
-  { "V", tZONE,	 HOUR ( 9) },
-  { "W", tZONE,	 HOUR (10) },
-  { "X", tZONE,	 HOUR (11) },
-  { "Y", tZONE,	 HOUR (12) },
-  { "Z", tZONE,	 HOUR ( 0) },
-  { 0, 0, 0 }
-};
-
-
-
-static int
-to_hour (int hours, int meridian)
-{
-  switch (meridian)
-    {
-    case MER24:
-      return 0 <= hours && hours < 24 ? hours : -1;
-    case MERam:
-      return 0 < hours && hours < 12 ? hours : hours == 12 ? 0 : -1;
-    case MERpm:
-      return 0 < hours && hours < 12 ? hours + 12 : hours == 12 ? 12 : -1;
-    default:
-      abort ();
-    }
-  /* NOTREACHED */
-}
-
-static int
-to_year (textint textyear)
-{
-  int year = textyear.value;
-
-  if (year < 0)
-    year = -year;
-
-  /* XPG4 suggests that years 00-68 map to 2000-2068, and
-     years 69-99 map to 1969-1999.  */
-  if (textyear.digits == 2)
-    year += year < 69 ? 2000 : 1900;
-
-  return year;
-}
-
-static table const *
-lookup_zone (parser_control const *pc, char const *name)
-{
-  table const *tp;
-
-  /* Try local zone abbreviations first; they're more likely to be right.  */
-  for (tp = pc->local_time_zone_table; tp->name; tp++)
-    if (strcmp (name, tp->name) == 0)
-      return tp;
-
-  for (tp = time_zone_table; tp->name; tp++)
-    if (strcmp (name, tp->name) == 0)
-      return tp;
-
-  return 0;
-}
-
-#if ! HAVE_TM_GMTOFF
-/* Yield the difference between *A and *B,
-   measured in seconds, ignoring leap seconds.
-   The body of this function is taken directly from the GNU C Library;
-   see src/strftime.c.  */
-static int
-tm_diff (struct tm const *a, struct tm const *b)
-{
-  /* Compute intervening leap days correctly even if year is negative.
-     Take care to avoid int overflow in leap day calculations,
-     but it's OK to assume that A and B are close to each other.  */
-  int a4 = (a->tm_year >> 2) + (TM_YEAR_BASE >> 2) - ! (a->tm_year & 3);
-  int b4 = (b->tm_year >> 2) + (TM_YEAR_BASE >> 2) - ! (b->tm_year & 3);
-  int a100 = a4 / 25 - (a4 % 25 < 0);
-  int b100 = b4 / 25 - (b4 % 25 < 0);
-  int a400 = a100 >> 2;
-  int b400 = b100 >> 2;
-  int intervening_leap_days = (a4 - b4) - (a100 - b100) + (a400 - b400);
-  int years = a->tm_year - b->tm_year;
-  int days = (365 * years + intervening_leap_days
-	      + (a->tm_yday - b->tm_yday));
-  return (60 * (60 * (24 * days + (a->tm_hour - b->tm_hour))
-		+ (a->tm_min - b->tm_min))
-	  + (a->tm_sec - b->tm_sec));
-}
-#endif /* ! HAVE_TM_GMTOFF */
-
-static table const *
-lookup_word (parser_control const *pc, char *word)
-{
-  char *p;
-  char *q;
-  size_t wordlen;
-  table const *tp;
-  int i;
-  int abbrev;
-
-  /* Make it uppercase.  */
-  for (p = word; *p; p++)
-    if (ISLOWER ((unsigned char) *p))
-      *p = toupper ((unsigned char) *p);
-
-  for (tp = meridian_table; tp->name; tp++)
-    if (strcmp (word, tp->name) == 0)
-      return tp;
-
-  /* See if we have an abbreviation for a month. */
-  wordlen = strlen (word);
-  abbrev = wordlen == 3 || (wordlen == 4 && word[3] == '.');
-
-  for (tp = month_and_day_table; tp->name; tp++)
-    if ((abbrev ? strncmp (word, tp->name, 3) : strcmp (word, tp->name)) == 0)
-      return tp;
-
-  if ((tp = lookup_zone (pc, word)))
-    return tp;
-
-  if (strcmp (word, dst_table[0].name) == 0)
-    return dst_table;
-
-  for (tp = time_units_table; tp->name; tp++)
-    if (strcmp (word, tp->name) == 0)
-      return tp;
-
-  /* Strip off any plural and try the units table again. */
-  if (word[wordlen - 1] == 'S')
-    {
-      word[wordlen - 1] = '\0';
-      for (tp = time_units_table; tp->name; tp++)
-	if (strcmp (word, tp->name) == 0)
-	  return tp;
-      word[wordlen - 1] = 'S';	/* For "this" in relative_time_table.  */
-    }
-
-  for (tp = relative_time_table; tp->name; tp++)
-    if (strcmp (word, tp->name) == 0)
-      return tp;
-
-  /* Military time zones. */
-  if (wordlen == 1)
-    for (tp = military_table; tp->name; tp++)
-      if (word[0] == tp->name[0])
-	return tp;
-
-  /* Drop out any periods and try the time zone table again. */
-  for (i = 0, p = q = word; (*p = *q); q++)
-    if (*q == '.')
-      i = 1;
-    else
-      p++;
-  if (i && (tp = lookup_zone (pc, word)))
-    return tp;
-
-  return 0;
-}
-
-static int
-yylex (YYSTYPE *lvalp, parser_control *pc)
-{
-  unsigned char c;
-  int count;
-
-  for (;;)
-    {
-      while (c = *pc->input, ISSPACE (c))
-	pc->input++;
-
-      if (ISDIGIT (c) || c == '-' || c == '+')
-	{
-	  char const *p;
-	  int sign;
-	  int value;
-	  if (c == '-' || c == '+')
-	    {
-	      sign = c == '-' ? -1 : 1;
-	      c = *++pc->input;
-	      if (! ISDIGIT (c))
-		/* skip the '-' sign */
-		continue;
-	    }
-	  else
-	    sign = 0;
-	  p = pc->input;
-	  value = 0;
-	  do
-	    {
-	      value = 10 * value + c - '0';
-	      c = *++p;
-	    }
-	  while (ISDIGIT (c));
-	  lvalp->textintval.value = sign < 0 ? -value : value;
-	  lvalp->textintval.digits = p - pc->input;
-	  pc->input = p;
-	  return sign ? tSNUMBER : tUNUMBER;
-	}
-
-      if (ISALPHA (c))
-	{
-	  char buff[20];
-	  char *p = buff;
-	  table const *tp;
-
-	  do
-	    {
-	      if (p < buff + sizeof buff - 1)
-		*p++ = c;
-	      c = *++pc->input;
-	    }
-	  while (ISALPHA (c) || c == '.');
-
-	  *p = '\0';
-	  tp = lookup_word (pc, buff);
-	  if (! tp)
-	    return '?';
-	  lvalp->intval = tp->value;
-	  return tp->type;
-	}
-
-      if (c != '(')
-	return *pc->input++;
-      count = 0;
-      do
-	{
-	  c = *pc->input++;
-	  if (c == '\0')
-	    return c;
-	  if (c == '(')
-	    count++;
-	  else if (c == ')')
-	    count--;
-	}
-      while (count > 0);
-    }
-}
-
-/* Do nothing if the parser reports an error.  */
-static int
-yyerror (char *s ATTRIBUTE_UNUSED)
-{
-  return 0;
-}
-
-/* Parse a date/time string P.  Return the corresponding time_t value,
-   or (time_t) -1 if there is an error.  P can be an incomplete or
-   relative time specification; if so, use *NOW as the basis for the
-   returned time.  */
-time_t
-get_date (const char *p, const time_t *now)
-{
-  time_t Start = now ? *now : time (0);
-  struct tm *tmp = localtime (&Start);
-  struct tm tm;
-  struct tm tm0;
-  parser_control pc;
-
-  if (! tmp)
-    return -1;
-
-  pc.input = p;
-  pc.year.value = tmp->tm_year + TM_YEAR_BASE;
-  pc.year.digits = 4;
-  pc.month = tmp->tm_mon + 1;
-  pc.day = tmp->tm_mday;
-  pc.hour = tmp->tm_hour;
-  pc.minutes = tmp->tm_min;
-  pc.seconds = tmp->tm_sec;
-  tm.tm_isdst = tmp->tm_isdst;
-
-  pc.meridian = MER24;
-  pc.rel_seconds = 0;
-  pc.rel_minutes = 0;
-  pc.rel_hour = 0;
-  pc.rel_day = 0;
-  pc.rel_month = 0;
-  pc.rel_year = 0;
-  pc.dates_seen = 0;
-  pc.days_seen = 0;
-  pc.rels_seen = 0;
-  pc.times_seen = 0;
-  pc.local_zones_seen = 0;
-  pc.zones_seen = 0;
-
-#if HAVE_STRUCT_TM_TM_ZONE
-  pc.local_time_zone_table[0].name = tmp->tm_zone;
-  pc.local_time_zone_table[0].type = tLOCAL_ZONE;
-  pc.local_time_zone_table[0].value = tmp->tm_isdst;
-  pc.local_time_zone_table[1].name = 0;
-
-  /* Probe the names used in the next three calendar quarters, looking
-     for a tm_isdst different from the one we already have.  */
-  {
-    int quarter;
-    for (quarter = 1; quarter <= 3; quarter++)
-      {
-	time_t probe = Start + quarter * (90 * 24 * 60 * 60);
-	struct tm *probe_tm = localtime (&probe);
-	if (probe_tm && probe_tm->tm_zone
-	    && probe_tm->tm_isdst != pc.local_time_zone_table[0].value)
-	  {
-	      {
-		pc.local_time_zone_table[1].name = probe_tm->tm_zone;
-		pc.local_time_zone_table[1].type = tLOCAL_ZONE;
-		pc.local_time_zone_table[1].value = probe_tm->tm_isdst;
-		pc.local_time_zone_table[2].name = 0;
-	      }
-	    break;
-	  }
-      }
-  }
-#else
-#if HAVE_TZNAME
-  {
-# ifndef tzname
-    extern char *tzname[];
-# endif
-    int i;
-    for (i = 0; i < 2; i++)
-      {
-	pc.local_time_zone_table[i].name = tzname[i];
-	pc.local_time_zone_table[i].type = tLOCAL_ZONE;
-	pc.local_time_zone_table[i].value = i;
-      }
-    pc.local_time_zone_table[i].name = 0;
-  }
-#else
-  pc.local_time_zone_table[0].name = 0;
-#endif
-#endif
-
-  if (pc.local_time_zone_table[0].name && pc.local_time_zone_table[1].name
-      && ! strcmp (pc.local_time_zone_table[0].name,
-		   pc.local_time_zone_table[1].name))
-    {
-      /* This locale uses the same abbrevation for standard and
-	 daylight times.  So if we see that abbreviation, we don't
-	 know whether it's daylight time.  */
-      pc.local_time_zone_table[0].value = -1;
-      pc.local_time_zone_table[1].name = 0;
-    }
-
-  if (yyparse (&pc) != 0
-      || 1 < pc.times_seen || 1 < pc.dates_seen || 1 < pc.days_seen
-      || 1 < (pc.local_zones_seen + pc.zones_seen)
-      || (pc.local_zones_seen && 1 < pc.local_isdst))
-    return -1;
-
-  tm.tm_year = to_year (pc.year) - TM_YEAR_BASE + pc.rel_year;
-  tm.tm_mon = pc.month - 1 + pc.rel_month;
-  tm.tm_mday = pc.day + pc.rel_day;
-  if (pc.times_seen || (pc.rels_seen && ! pc.dates_seen && ! pc.days_seen))
-    {
-      tm.tm_hour = to_hour (pc.hour, pc.meridian);
-      if (tm.tm_hour < 0)
-	return -1;
-      tm.tm_min = pc.minutes;
-      tm.tm_sec = pc.seconds;
-    }
-  else
-    {
-      tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
-    }
-
-  /* Let mktime deduce tm_isdst if we have an absolute time stamp,
-     or if the relative time stamp mentions days, months, or years.  */
-  if (pc.dates_seen | pc.days_seen | pc.times_seen | pc.rel_day
-      | pc.rel_month | pc.rel_year)
-    tm.tm_isdst = -1;
-
-  /* But if the input explicitly specifies local time with or without
-     DST, give mktime that information.  */
-  if (pc.local_zones_seen)
-    tm.tm_isdst = pc.local_isdst;
-
-  tm0 = tm;
-
-  Start = mktime (&tm);
-
-  if (Start == (time_t) -1)
-    {
-
-      /* Guard against falsely reporting errors near the time_t boundaries
-         when parsing times in other time zones.  For example, if the min
-         time_t value is 1970-01-01 00:00:00 UTC and we are 8 hours ahead
-         of UTC, then the min localtime value is 1970-01-01 08:00:00; if
-         we apply mktime to 1970-01-01 00:00:00 we will get an error, so
-         we apply mktime to 1970-01-02 08:00:00 instead and adjust the time
-         zone by 24 hours to compensate.  This algorithm assumes that
-         there is no DST transition within a day of the time_t boundaries.  */
-      if (pc.zones_seen)
-	{
-	  tm = tm0;
-	  if (tm.tm_year <= EPOCH_YEAR - TM_YEAR_BASE)
-	    {
-	      tm.tm_mday++;
-	      pc.time_zone += 24 * 60;
-	    }
-	  else
-	    {
-	      tm.tm_mday--;
-	      pc.time_zone -= 24 * 60;
-	    }
-	  Start = mktime (&tm);
-	}
-
-      if (Start == (time_t) -1)
-	return Start;
-    }
-
-  if (pc.days_seen && ! pc.dates_seen)
-    {
-      tm.tm_mday += ((pc.day_number - tm.tm_wday + 7) % 7
-		     + 7 * (pc.day_ordinal - (0 < pc.day_ordinal)));
-      tm.tm_isdst = -1;
-      Start = mktime (&tm);
-      if (Start == (time_t) -1)
-	return Start;
-    }
-
-  if (pc.zones_seen)
-    {
-      int delta = pc.time_zone * 60;
-#ifdef HAVE_TM_GMTOFF
-      delta -= tm.tm_gmtoff;
-#else
-      struct tm *gmt = gmtime (&Start);
-      if (! gmt)
-	return -1;
-      delta -= tm_diff (&tm, gmt);
-#endif
-      if ((Start < Start - delta) != (delta < 0))
-	return -1;	/* time_t overflow */
-      Start -= delta;
-    }
-
-  /* Add relative hours, minutes, and seconds.  Ignore leap seconds;
-     i.e. "+ 10 minutes" means 600 seconds, even if one of them is a
-     leap second.  Typically this is not what the user wants, but it's
-     too hard to do it the other way, because the time zone indicator
-     must be applied before relative times, and if mktime is applied
-     again the time zone will be lost.  */
-  {
-    time_t t0 = Start;
-    long d1 = 60 * 60 * (long) pc.rel_hour;
-    time_t t1 = t0 + d1;
-    long d2 = 60 * (long) pc.rel_minutes;
-    time_t t2 = t1 + d2;
-    int d3 = pc.rel_seconds;
-    time_t t3 = t2 + d3;
-    if ((d1 / (60 * 60) ^ pc.rel_hour)
-	| (d2 / 60 ^ pc.rel_minutes)
-	| ((t0 + d1 < t0) ^ (d1 < 0))
-	| ((t1 + d2 < t1) ^ (d2 < 0))
-	| ((t2 + d3 < t2) ^ (d3 < 0)))
-      return -1;
-    Start = t3;
-  }
-
-  return Start;
-}
-
-#if TEST
-
-#include <stdio.h>
-
-int
-main (int ac, char **av)
-{
-  char buff[BUFSIZ];
-  time_t d;
-
-  printf ("Enter date, or blank line to exit.\n\t> ");
-  fflush (stdout);
-
-  buff[BUFSIZ - 1] = 0;
-  while (fgets (buff, BUFSIZ - 1, stdin) && buff[0])
-    {
-      d = get_date (buff, 0);
-      if (d == (time_t) -1)
-	printf ("Bad format - couldn't convert.\n");
-      else
-	printf ("%s", ctime (&d));
-      printf ("\t> ");
-      fflush (stdout);
-    }
-  return 0;
-}
-#endif /* defined TEST */

lib/human.c

@@ -1,366 +0,0 @@
-/* human.c -- print human readable file size
-
-   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 Free Software
-   Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Originally contributed by lm@sgi.com;
-   --si, output block size selection, and large file support
-   added by eggert@twinsun.com.  */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <sys/types.h>
-#include <stdio.h>
-
-#if HAVE_LIMITS_H
-# include <limits.h>
-#endif
-
-#if HAVE_STRING_H
-# include <string.h>
-#else
-# include <strings.h>
-#endif
-
-#ifndef CHAR_BIT
-# define CHAR_BIT 8
-#endif
-#if HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-
-#ifndef HAVE_DECL_GETENV
-"this configure-time declaration test was not run"
-#endif
-#if !HAVE_DECL_GETENV
-char *getenv ();
-#endif
-
-#if ENABLE_NLS
-# include <libintl.h>
-# define _(Text) gettext (Text)
-#else
-# define _(Text) Text
-#endif
-
-#include <argmatch.h>
-#include <error.h>
-#include <xstrtol.h>
-
-#include "human.h"
-
-static const char suffixes[] =
-{
-  0,	/* not used */
-  'K',	/* kibi ('k' for kilo is a special case) */
-  'M',	/* mega or mebi */
-  'G',	/* giga or gibi */
-  'T',	/* tera or tebi */
-  'P',	/* peta or pebi */
-  'E',	/* exa or exbi */
-  'Z',	/* zetta or 2**70 */
-  'Y'	/* yotta or 2**80 */
-};
-
-/* Generate into P[-1] (and possibly P[-2]) the proper suffix for
-   POWER and BASE.  Return the address of the generated suffix.  */
-static char *
-generate_suffix_backwards (char *p, int power, int base)
-{
-  char letter = suffixes[power];
-
-  if (base == 1000)
-    {
-      *--p = 'B';
-      if (power == 1)
-	letter = 'k';
-    }
-
-  *--p = letter;
-  return p;
-}
-
-/* If INEXACT_STYLE is not human_round_to_even, and if easily
-   possible, adjust VALUE according to the style.  */
-static double
-adjust_value (enum human_inexact_style inexact_style, double value)
-{
-  /* Do not use the floor or ceil functions, as that would mean
-     linking with the standard math library, which is a porting pain.
-     So leave the value alone if it is too large to easily round.  */
-  if (inexact_style != human_round_to_even && value < (uintmax_t) -1)
-    {
-      uintmax_t u = value;
-      value = u + (inexact_style == human_ceiling && u != value);
-    }
-
-  return value;
-}
-
-/* Like human_readable_inexact, except always round to even.  */
-char *
-human_readable (uintmax_t n, char *buf,
-		int from_block_size, int output_block_size)
-{
-  return human_readable_inexact (n, buf, from_block_size, output_block_size,
-				 human_round_to_even);
-}
-
-/* Convert N to a human readable format in BUF.
-
-   N is expressed in units of FROM_BLOCK_SIZE.  FROM_BLOCK_SIZE must
-   be nonnegative.
-
-   OUTPUT_BLOCK_SIZE must be nonzero.  If it is positive, use units of
-   OUTPUT_BLOCK_SIZE in the output number.
-
-   Use INEXACT_STYLE to determine whether to take the ceiling or floor
-   of any result that cannot be expressed exactly.
-
-   If OUTPUT_BLOCK_SIZE is negative, use a format like "127K" if
-   possible, using powers of -OUTPUT_BLOCK_SIZE; otherwise, use
-   ordinary decimal format.  Normally -OUTPUT_BLOCK_SIZE is either
-   1000 or 1024; it must be at least 2.  Most people visually process
-   strings of 3-4 digits effectively, but longer strings of digits are
-   more prone to misinterpretation.  Hence, converting to an
-   abbreviated form usually improves readability.  Use a suffix
-   indicating which power is being used.  For example, assuming
-   -OUTPUT_BLOCK_SIZE is 1024, 8500 would be converted to 8.3K,
-   133456345 to 127M, 56990456345 to 53G, and so on.  Numbers smaller
-   than -OUTPUT_BLOCK_SIZE aren't modified.  If -OUTPUT_BLOCK_SIZE is
-   1024, append a "B" after any size letter.  */
-
-char *
-human_readable_inexact (uintmax_t n, char *buf,
-			int from_block_size, int output_block_size,
-			enum human_inexact_style inexact_style)
-{
-  uintmax_t amt;
-  int base;
-  int to_block_size;
-  int tenths = 0;
-  int power;
-  char *p;
-
-  /* 0 means adjusted N == AMT.TENTHS;
-     1 means AMT.TENTHS < adjusted N < AMT.TENTHS + 0.05;
-     2 means adjusted N == AMT.TENTHS + 0.05;
-     3 means AMT.TENTHS + 0.05 < adjusted N < AMT.TENTHS + 0.1.  */
-  int rounding = 0;
-
-  if (output_block_size < 0)
-    {
-      base = -output_block_size;
-      to_block_size = 1;
-    }
-  else
-    {
-      base = 0;
-      to_block_size = output_block_size;
-    }
-
-  p = buf + LONGEST_HUMAN_READABLE;
-  *p = '\0';
-
-#ifdef lint
-  /* Suppress `used before initialized' warning.  */
-  power = 0;
-#endif
-
-  /* Adjust AMT out of FROM_BLOCK_SIZE units and into TO_BLOCK_SIZE units.  */
-
-  {
-    int multiplier;
-    int divisor;
-    int r2;
-    int r10;
-    if (to_block_size <= from_block_size
-	? (from_block_size % to_block_size != 0
-	   || (multiplier = from_block_size / to_block_size,
-	       (amt = n * multiplier) / multiplier != n))
-	: (from_block_size == 0
-	   || to_block_size % from_block_size != 0
-	   || (divisor = to_block_size / from_block_size,
-	       r10 = (n % divisor) * 10,
-	       r2 = (r10 % divisor) * 2,
-	       amt = n / divisor,
-	       tenths = r10 / divisor,
-	       rounding = r2 < divisor ? 0 < r2 : 2 + (divisor < r2),
-	       0)))
-      {
-	/* Either the result cannot be computed easily using uintmax_t,
-	   or from_block_size is zero.  Fall back on floating point.
-	   FIXME: This can yield answers that are slightly off.  */
-
-	double damt = n * (from_block_size / (double) to_block_size);
-
-	if (! base)
-	  sprintf (buf, "%.0f", adjust_value (inexact_style, damt));
-	else
-	  {
-	    char suffix[3];
-	    char const *psuffix;
-	    double e = 1;
-	    power = 0;
-
-	    do
-	      {
-		e *= base;
-		power++;
-	      }
-	    while (e * base <= damt && power < sizeof suffixes - 1);
-
-	    damt /= e;
-
-	    suffix[2] = '\0';
-	    psuffix = generate_suffix_backwards (suffix + 2, power, base);
-	    sprintf (buf, "%.1f%s",
-		     adjust_value (inexact_style, damt), psuffix);
-	    if (4 + (base == 1000) < strlen (buf))
-	      sprintf (buf, "%.0f%s",
-		       adjust_value (inexact_style, damt * 10) / 10, psuffix);
-	  }
-
-	return buf;
-      }
-  }
-
-  /* Use power of BASE notation if adjusted AMT is large enough.  */
-
-  if (base && base <= amt)
-    {
-      power = 0;
-
-      do
-	{
-	  int r10 = (amt % base) * 10 + tenths;
-	  int r2 = (r10 % base) * 2 + (rounding >> 1);
-	  amt /= base;
-	  tenths = r10 / base;
-	  rounding = (r2 < base
-		      ? 0 < r2 + rounding
-		      : 2 + (base < r2 + rounding));
-	  power++;
-	}
-      while (base <= amt && power < sizeof suffixes - 1);
-
-      p = generate_suffix_backwards (p, power, base);
-
-      if (amt < 10)
-	{
-	  if (2 * (1 - (int) inexact_style)
-	      < rounding + (tenths & (inexact_style == human_round_to_even)))
-	    {
-	      tenths++;
-	      rounding = 0;
-
-	      if (tenths == 10)
-		{
-		  amt++;
-		  tenths = 0;
-		}
-	    }
-
-	  if (amt < 10)
-	    {
-	      *--p = '0' + tenths;
-	      *--p = '.';
-	      tenths = rounding = 0;
-	    }
-	}
-    }
-
-  if (inexact_style == human_ceiling
-      ? 0 < tenths + rounding
-      : inexact_style == human_round_to_even
-      ? 5 < tenths + (2 < rounding + (amt & 1))
-      : /* inexact_style == human_floor */ 0)
-    {
-      amt++;
-
-      if (amt == base && power < sizeof suffixes - 1)
-	{
-	  *p = suffixes[power + 1];
-	  *--p = '0';
-	  *--p = '.';
-	  amt = 1;
-	}
-    }
-
-  do
-    *--p = '0' + (int) (amt % 10);
-  while ((amt /= 10) != 0);
-
-  return p;
-}
-
-
-/* The default block size used for output.  This number may change in
-   the future as disks get larger.  */
-#ifndef DEFAULT_BLOCK_SIZE
-# define DEFAULT_BLOCK_SIZE 1024
-#endif
-
-static char const *const block_size_args[] = { "human-readable", "si", 0 };
-static int const block_size_types[] = { -1024, -1000 };
-
-static int
-default_block_size (void)
-{
-  return getenv ("POSIXLY_CORRECT") ? 512 : DEFAULT_BLOCK_SIZE;
-}
-
-static strtol_error
-humblock (char const *spec, int *block_size)
-{
-  int i;
-
-  if (! spec && ! (spec = getenv ("BLOCK_SIZE")))
-    *block_size = default_block_size ();
-  else if (0 <= (i = ARGMATCH (spec, block_size_args, block_size_types)))
-    *block_size = block_size_types[i];
-  else
-    {
-      char *ptr;
-      unsigned long val;
-      strtol_error e = xstrtoul (spec, &ptr, 0, &val, "eEgGkKmMpPtTyYzZ0");
-      if (e != LONGINT_OK)
-	return e;
-      if (*ptr)
-	return LONGINT_INVALID_SUFFIX_CHAR;
-      if ((int) val < 0 || val != (int) val)
-	return LONGINT_OVERFLOW;
-      *block_size = (int) val;
-    }
-
-  return LONGINT_OK;
-}
-
-void
-human_block_size (char const *spec, int report_errors, int *block_size)
-{
-  strtol_error e = humblock (spec, block_size);
-  if (*block_size == 0)
-    {
-      *block_size = default_block_size ();
-      e = LONGINT_INVALID;
-    }
-  if (e != LONGINT_OK && report_errors)
-    STRTOL_FATAL_ERROR (spec, _("block size"), e);
-}

lib/human.h

@@ -1,46 +0,0 @@
-#ifndef HUMAN_H_
-# define HUMAN_H_ 1
-
-# if HAVE_CONFIG_H
-#  include <config.h>
-# endif
-
-# if HAVE_INTTYPES_H
-#  include <inttypes.h>
-# endif
-
-# if HAVE_LIMITS_H
-#  include <limits.h>
-# endif
-# ifndef CHAR_BIT
-#  define CHAR_BIT 8
-# endif
-
-/* A conservative bound on the maximum length of a human-readable string.
-   The output can be the product of the largest uintmax_t and the largest int,
-   so add their sizes before converting to a bound on digits.  */
-# define LONGEST_HUMAN_READABLE ((sizeof (uintmax_t) + sizeof (int)) \
-				 * CHAR_BIT / 3)
-
-# ifndef PARAMS
-#  if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-#   define PARAMS(Args) Args
-#  else
-#   define PARAMS(Args) ()
-#  endif
-# endif
-
-enum human_inexact_style
-{
-  human_floor = -1,
-  human_round_to_even = 0,
-  human_ceiling = 1
-};
-
-char *human_readable PARAMS ((uintmax_t, char *, int, int));
-char *human_readable_inexact PARAMS ((uintmax_t, char *, int, int,
-				      enum human_inexact_style));
-
-void human_block_size PARAMS ((char const *, int, int *));
-
-#endif /* HUMAN_H_ */

lib/lchown.h

@@ -1,9 +0,0 @@
-/* Some systems don't have ENOSYS.  */
-#ifndef ENOSYS
-# ifdef ENOTSUP
-#  define ENOSYS ENOTSUP
-# else
-/* Some systems don't have ENOTSUP either.  */
-#  define ENOSYS ENOMSG
-# endif
-#endif

lib/print-copyr.c

@@ -1,57 +0,0 @@
-/* Print a copyright notice suitable for the current locale.
-   Copyright (C) 2001 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by Paul Eggert.  */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include "print-copyr.h"
-#include <stdio.h>
-
-#if ENABLE_NLS
-# include "unicodeio.h"
-#else
-# define unicode_to_mb(code, callback, error_callback, callback_arg) \
-    error_callback (code, callback_arg)
-#endif
-
-#define COPYRIGHT_SIGN 0x00A9
-
-/* Print "(C)".  */
-
-static int
-print_parenthesized_c (unsigned int code, void *callback_arg)
-{
-  FILE *stream = callback_arg;
-  return fputs ("(C)", stream);
-}
-
-/* Print "Copyright (C) " followed by NOTICE and then a newline,
-   transliterating "(C)" to an actual copyright sign (C-in-a-circle)
-   if possible.  */
-
-void
-print_copyright (char const *notice)
-{
-  fputs ("Copyright ", stdout);
-  unicode_to_mb (COPYRIGHT_SIGN, print_unicode_char, print_parenthesized_c,
-		 stdout);
-  fputc (' ', stdout);
-  puts (notice);
-}

lib/print-copyr.h

@@ -1,9 +0,0 @@
-# ifndef PARAMS
-#  if PROTOTYPES || (defined (__STDC__) && __STDC__)
-#   define PARAMS(args) args
-#  else
-#   define PARAMS(args) ()
-#  endif
-# endif
-
-void print_copyright PARAMS((char const *));

lib/quotearg.c

@@ -1,658 +0,0 @@
-/* quotearg.c - quote arguments for output
-   Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by Paul Eggert <eggert@twinsun.com> */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if HAVE_STDDEF_H
-# include <stddef.h>  /* For the definition of size_t on windows w/MSVC.  */
-#endif
-#include <sys/types.h>
-#include <quotearg.h>
-#include <xalloc.h>
-
-#include <ctype.h>
-
-#if ENABLE_NLS
-# include <libintl.h>
-# define _(text) gettext (text)
-#else
-# define _(text) text
-#endif
-#define N_(text) text
-
-#if HAVE_LIMITS_H
-# include <limits.h>
-#endif
-#ifndef CHAR_BIT
-# define CHAR_BIT 8
-#endif
-#ifndef SIZE_MAX
-# define SIZE_MAX ((size_t) -1)
-#endif
-#ifndef UCHAR_MAX
-# define UCHAR_MAX ((unsigned char) -1)
-#endif
-#ifndef UINT_MAX
-# define UINT_MAX ((unsigned int) -1)
-#endif
-
-#if HAVE_C_BACKSLASH_A
-# define ALERT_CHAR '\a'
-#else
-# define ALERT_CHAR '\7'
-#endif
-
-#if HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-
-#if HAVE_STRING_H
-# include <string.h>
-#endif
-
-#if HAVE_WCHAR_H
-
-/* BSD/OS 4.1 wchar.h requires FILE and struct tm to be declared.  */
-# include <stdio.h>
-# include <time.h>
-
-# include <wchar.h>
-#endif
-
-#if !HAVE_MBRTOWC
-/* Disable multibyte processing entirely.  Since MB_CUR_MAX is 1, the
-   other macros are defined only for documentation and to satisfy C
-   syntax.  */
-# undef MB_CUR_MAX
-# define MB_CUR_MAX 1
-# define mbrtowc(pwc, s, n, ps) ((*(pwc) = *(s)) != 0)
-# define mbsinit(ps) 1
-# define iswprint(wc) ISPRINT ((unsigned char) (wc))
-#endif
-
-#ifndef iswprint
-# if HAVE_WCTYPE_H
-#  include <wctype.h>
-# endif
-# if !defined iswprint && !HAVE_ISWPRINT
-#  define iswprint(wc) 1
-# endif
-#endif
-
-#define INT_BITS (sizeof (int) * CHAR_BIT)
-
-#if defined (STDC_HEADERS) || (!defined (isascii) && !defined (HAVE_ISASCII))
-# define IN_CTYPE_DOMAIN(c) 1
-#else
-# define IN_CTYPE_DOMAIN(c) isascii(c)
-#endif
-
-/* Undefine to protect against the definition in wctype.h of solaris2.6.   */
-#undef ISPRINT
-#define ISPRINT(c) (IN_CTYPE_DOMAIN (c) && isprint (c))
-
-struct quoting_options
-{
-  /* Basic quoting style.  */
-  enum quoting_style style;
-
-  /* Quote the characters indicated by this bit vector even if the
-     quoting style would not normally require them to be quoted.  */
-  int quote_these_too[(UCHAR_MAX / INT_BITS) + 1];
-};
-
-/* Names of quoting styles.  */
-char const *const quoting_style_args[] =
-{
-  "literal",
-  "shell",
-  "shell-always",
-  "c",
-  "escape",
-  "locale",
-  "clocale",
-  0
-};
-
-/* Correspondences to quoting style names.  */
-enum quoting_style const quoting_style_vals[] =
-{
-  literal_quoting_style,
-  shell_quoting_style,
-  shell_always_quoting_style,
-  c_quoting_style,
-  escape_quoting_style,
-  locale_quoting_style,
-  clocale_quoting_style
-};
-
-/* The default quoting options.  */
-static struct quoting_options default_quoting_options;
-
-/* Allocate a new set of quoting options, with contents initially identical
-   to O if O is not null, or to the default if O is null.
-   It is the caller's responsibility to free the result.  */
-struct quoting_options *
-clone_quoting_options (struct quoting_options *o)
-{
-  struct quoting_options *p
-    = (struct quoting_options *) xmalloc (sizeof (struct quoting_options));
-  *p = *(o ? o : &default_quoting_options);
-  return p;
-}
-
-/* Get the value of O's quoting style.  If O is null, use the default.  */
-enum quoting_style
-get_quoting_style (struct quoting_options *o)
-{
-  return (o ? o : &default_quoting_options)->style;
-}
-
-/* In O (or in the default if O is null),
-   set the value of the quoting style to S.  */
-void
-set_quoting_style (struct quoting_options *o, enum quoting_style s)
-{
-  (o ? o : &default_quoting_options)->style = s;
-}
-
-/* In O (or in the default if O is null),
-   set the value of the quoting options for character C to I.
-   Return the old value.  Currently, the only values defined for I are
-   0 (the default) and 1 (which means to quote the character even if
-   it would not otherwise be quoted).  */
-int
-set_char_quoting (struct quoting_options *o, char c, int i)
-{
-  unsigned char uc = c;
-  int *p = (o ? o : &default_quoting_options)->quote_these_too + uc / INT_BITS;
-  int shift = uc % INT_BITS;
-  int r = (*p >> shift) & 1;
-  *p ^= ((i & 1) ^ r) << shift;
-  return r;
-}
-
-/* MSGID approximates a quotation mark.  Return its translation if it
-   has one; otherwise, return either it or "\"", depending on S.  */
-static char const *
-gettext_quote (char const *msgid, enum quoting_style s)
-{
-  char const *translation = _(msgid);
-  if (translation == msgid && s == clocale_quoting_style)
-    translation = "\"";
-  return translation;
-}
-
-/* Place into buffer BUFFER (of size BUFFERSIZE) a quoted version of
-   argument ARG (of size ARGSIZE), using QUOTING_STYLE and the
-   non-quoting-style part of O to control quoting.
-   Terminate the output with a null character, and return the written
-   size of the output, not counting the terminating null.
-   If BUFFERSIZE is too small to store the output string, return the
-   value that would have been returned had BUFFERSIZE been large enough.
-   If ARGSIZE is -1, use the string length of the argument for ARGSIZE.
-
-   This function acts like quotearg_buffer (BUFFER, BUFFERSIZE, ARG,
-   ARGSIZE, O), except it uses QUOTING_STYLE instead of the quoting
-   style specified by O, and O may not be null.  */
-
-static size_t
-quotearg_buffer_restyled (char *buffer, size_t buffersize,
-			  char const *arg, size_t argsize,
-			  enum quoting_style quoting_style,
-			  struct quoting_options const *o)
-{
-  size_t i;
-  size_t len = 0;
-  char const *quote_string = 0;
-  size_t quote_string_len = 0;
-  int backslash_escapes = 0;
-  int unibyte_locale = MB_CUR_MAX == 1;
-
-#define STORE(c) \
-    do \
-      { \
-	if (len < buffersize) \
-	  buffer[len] = (c); \
-	len++; \
-      } \
-    while (0)
-
-  switch (quoting_style)
-    {
-    case c_quoting_style:
-      STORE ('"');
-      backslash_escapes = 1;
-      quote_string = "\"";
-      quote_string_len = 1;
-      break;
-
-    case escape_quoting_style:
-      backslash_escapes = 1;
-      break;
-
-    case locale_quoting_style:
-    case clocale_quoting_style:
-      {
-	/* Get translations for open and closing quotation marks.
-
-	   The message catalog should translate "`" to a left
-	   quotation mark suitable for the locale, and similarly for
-	   "'".  If the catalog has no translation,
-	   locale_quoting_style quotes `like this', and
-	   clocale_quoting_style quotes "like this".
-
-	   For example, an American English Unicode locale should
-	   translate "`" to U+201C (LEFT DOUBLE QUOTATION MARK), and
-	   should translate "'" to U+201D (RIGHT DOUBLE QUOTATION
-	   MARK).  A British English Unicode locale should instead
-	   translate these to U+2018 (LEFT SINGLE QUOTATION MARK) and
-	   U+2019 (RIGHT SINGLE QUOTATION MARK), respectively.  */
-
-	char const *left = gettext_quote (N_("`"), quoting_style);
-	char const *right = gettext_quote (N_("'"), quoting_style);
-	for (quote_string = left; *quote_string; quote_string++)
-	  STORE (*quote_string);
-	backslash_escapes = 1;
-	quote_string = right;
-	quote_string_len = strlen (quote_string);
-      }
-      break;
-
-    case shell_always_quoting_style:
-      STORE ('\'');
-      quote_string = "'";
-      quote_string_len = 1;
-      break;
-
-    default:
-      break;
-    }
-
-  for (i = 0;  ! (argsize == (size_t) -1 ? arg[i] == '\0' : i == argsize);  i++)
-    {
-      unsigned char c;
-      unsigned char esc;
-
-      if (backslash_escapes
-	  && quote_string_len
-	  && i + quote_string_len <= argsize
-	  && memcmp (arg + i, quote_string, quote_string_len) == 0)
-	STORE ('\\');
-
-      c = arg[i];
-      switch (c)
-	{
-	case '\0':
-	  if (backslash_escapes)
-	    {
-	      STORE ('\\');
-	      STORE ('0');
-	      STORE ('0');
-	      c = '0';
-	    }
-	  break;
-
-	case '?':
-	  switch (quoting_style)
-	    {
-	    case shell_quoting_style:
-	      goto use_shell_always_quoting_style;
-
-	    case c_quoting_style:
-	      if (i + 2 < argsize && arg[i + 1] == '?')
-		switch (arg[i + 2])
-		  {
-		  case '!': case '\'':
-		  case '(': case ')': case '-': case '/':
-		  case '<': case '=': case '>':
-		    /* Escape the second '?' in what would otherwise be
-		       a trigraph.  */
-		    i += 2;
-		    c = arg[i + 2];
-		    STORE ('?');
-		    STORE ('\\');
-		    STORE ('?');
-		    break;
-		  }
-	      break;
-
-	    default:
-	      break;
-	    }
-	  break;
-
-	case ALERT_CHAR: esc = 'a'; goto c_escape;
-	case '\b': esc = 'b'; goto c_escape;
-	case '\f': esc = 'f'; goto c_escape;
-	case '\n': esc = 'n'; goto c_and_shell_escape;
-	case '\r': esc = 'r'; goto c_and_shell_escape;
-	case '\t': esc = 't'; goto c_and_shell_escape;
-	case '\v': esc = 'v'; goto c_escape;
-	case '\\': esc = c; goto c_and_shell_escape;
-
-	c_and_shell_escape:
-	  if (quoting_style == shell_quoting_style)
-	    goto use_shell_always_quoting_style;
-	c_escape:
-	  if (backslash_escapes)
-	    {
-	      c = esc;
-	      goto store_escape;
-	    }
-	  break;
-
-	case '#': case '~':
-	  if (i != 0)
-	    break;
-	  /* Fall through.  */
-	case ' ':
-	case '!': /* special in bash */
-	case '"': case '$': case '&':
-	case '(': case ')': case '*': case ';':
-	case '<': case '>': case '[':
-	case '^': /* special in old /bin/sh, e.g. SunOS 4.1.4 */
-	case '`': case '|':
-	  /* A shell special character.  In theory, '$' and '`' could
-	     be the first bytes of multibyte characters, which means
-	     we should check them with mbrtowc, but in practice this
-	     doesn't happen so it's not worth worrying about.  */
-	  if (quoting_style == shell_quoting_style)
-	    goto use_shell_always_quoting_style;
-	  break;
-
-	case '\'':
-	  switch (quoting_style)
-	    {
-	    case shell_quoting_style:
-	      goto use_shell_always_quoting_style;
-
-	    case shell_always_quoting_style:
-	      STORE ('\'');
-	      STORE ('\\');
-	      STORE ('\'');
-	      break;
-
-	    default:
-	      break;
-	    }
-	  break;
-
-	case '%': case '+': case ',': case '-': case '.': case '/':
-	case '0': case '1': case '2': case '3': case '4': case '5':
-	case '6': case '7': case '8': case '9': case ':': case '=':
-	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
-	case 'G': case 'H': case 'I': case 'J': case 'K': case 'L':
-	case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R':
-	case 'S': case 'T': case 'U': case 'V': case 'W': case 'X':
-	case 'Y': case 'Z': case ']': case '_': case 'a': case 'b':
-	case 'c': case 'd': case 'e': case 'f': case 'g': case 'h':
-	case 'i': case 'j': case 'k': case 'l': case 'm': case 'n':
-	case 'o': case 'p': case 'q': case 'r': case 's': case 't':
-	case 'u': case 'v': case 'w': case 'x': case 'y': case 'z':
-	case '{': case '}':
-	  /* These characters don't cause problems, no matter what the
-	     quoting style is.  They cannot start multibyte sequences.  */
-	  break;
-
-	default:
-	  /* If we have a multibyte sequence, copy it until we reach
-	     its end, find an error, or come back to the initial shift
-	     state.  For C-like styles, if the sequence has
-	     unprintable characters, escape the whole sequence, since
-	     we can't easily escape single characters within it.  */
-	  {
-	    /* Length of multibyte sequence found so far.  */
-	    size_t m;
-
-	    int printable;
-
-	    if (unibyte_locale)
-	      {
-		m = 1;
-		printable = ISPRINT (c);
-	      }
-	    else
-	      {
-		mbstate_t mbstate;
-		memset (&mbstate, 0, sizeof mbstate);
-
-		m = 0;
-		printable = 1;
-		if (argsize == (size_t) -1)
-		  argsize = strlen (arg);
-
-		do
-		  {
-		    wchar_t w;
-		    size_t bytes = mbrtowc (&w, &arg[i + m],
-					    argsize - (i + m), &mbstate);
-		    if (bytes == 0)
-		      break;
-		    else if (bytes == (size_t) -1)
-		      {
-			printable = 0;
-			break;
-		      }
-		    else if (bytes == (size_t) -2)
-		      {
-			printable = 0;
-			while (i + m < argsize && arg[i + m])
-			  m++;
-			break;
-		      }
-		    else
-		      {
-			if (! iswprint (w))
-			  printable = 0;
-			m += bytes;
-		      }
-		  }
-		while (! mbsinit (&mbstate));
-	      }
-
-	    if (1 < m || (backslash_escapes && ! printable))
-	      {
-		/* Output a multibyte sequence, or an escaped
-		   unprintable unibyte character.  */
-		size_t ilim = i + m;
-
-		for (;;)
-		  {
-		    if (backslash_escapes && ! printable)
-		      {
-			STORE ('\\');
-			STORE ('0' + (c >> 6));
-			STORE ('0' + ((c >> 3) & 7));
-			c = '0' + (c & 7);
-		      }
-		    if (ilim <= i + 1)
-		      break;
-		    STORE (c);
-		    c = arg[++i];
-		  }
-
-		goto store_c;
-	      }
-	  }
-	}
-
-      if (! (backslash_escapes
-	     && o->quote_these_too[c / INT_BITS] & (1 << (c % INT_BITS))))
-	goto store_c;
-
-    store_escape:
-      STORE ('\\');
-
-    store_c:
-      STORE (c);
-    }
-
-  if (quote_string)
-    for (; *quote_string; quote_string++)
-      STORE (*quote_string);
-
-  if (len < buffersize)
-    buffer[len] = '\0';
-  return len;
-
- use_shell_always_quoting_style:
-  return quotearg_buffer_restyled (buffer, buffersize, arg, argsize,
-				   shell_always_quoting_style, o);
-}
-
-/* Place into buffer BUFFER (of size BUFFERSIZE) a quoted version of
-   argument ARG (of size ARGSIZE), using O to control quoting.
-   If O is null, use the default.
-   Terminate the output with a null character, and return the written
-   size of the output, not counting the terminating null.
-   If BUFFERSIZE is too small to store the output string, return the
-   value that would have been returned had BUFFERSIZE been large enough.
-   If ARGSIZE is -1, use the string length of the argument for ARGSIZE.  */
-size_t
-quotearg_buffer (char *buffer, size_t buffersize,
-		 char const *arg, size_t argsize,
-		 struct quoting_options const *o)
-{
-  struct quoting_options const *p = o ? o : &default_quoting_options;
-  return quotearg_buffer_restyled (buffer, buffersize, arg, argsize,
-				   p->style, p);
-}
-
-/* Use storage slot N to return a quoted version of argument ARG.
-   ARG is of size ARGSIZE, but if that is -1, ARG is a null-terminated string.
-   OPTIONS specifies the quoting options.
-   The returned value points to static storage that can be
-   reused by the next call to this function with the same value of N.
-   N must be nonnegative.  N is deliberately declared with type "int"
-   to allow for future extensions (using negative values).  */
-static char *
-quotearg_n_options (int n, char const *arg, size_t argsize,
-		    struct quoting_options const *options)
-{
-  /* Preallocate a slot 0 buffer, so that the caller can always quote
-     one small component of a "memory exhausted" message in slot 0.  */
-  static char slot0[256];
-  static unsigned int nslots = 1;
-  unsigned int n0 = n;
-  struct slotvec
-    {
-      size_t size;
-      char *val;
-    };
-  static struct slotvec slotvec0 = {sizeof slot0, slot0};
-  static struct slotvec *slotvec = &slotvec0;
-
-  if (n < 0)
-    abort ();
-
-  if (nslots <= n0)
-    {
-      unsigned int n1 = n0 + 1;
-      size_t s = n1 * sizeof *slotvec;
-
-      if (SIZE_MAX / UINT_MAX <= sizeof *slotvec
-	  && n1 != s / sizeof *slotvec)
-	xalloc_die ();
-
-      if (slotvec == &slotvec0)
-	{
-	  slotvec = (struct slotvec *) xmalloc (sizeof *slotvec);
-	  *slotvec = slotvec0;
-	}
-      slotvec = (struct slotvec *) xrealloc (slotvec, s);
-      memset (slotvec + nslots, 0, (n1 - nslots) * sizeof *slotvec);
-      nslots = n1;
-    }
-
-  {
-    size_t size = slotvec[n].size;
-    char *val = slotvec[n].val;
-    size_t qsize = quotearg_buffer (val, size, arg, argsize, options);
-
-    if (size <= qsize)
-      {
-	slotvec[n].size = size = qsize + 1;
-	slotvec[n].val = val = xrealloc (val == slot0 ? 0 : val, size);
-	quotearg_buffer (val, size, arg, argsize, options);
-      }
-
-    return val;
-  }
-}
-
-char *
-quotearg_n (int n, char const *arg)
-{
-  return quotearg_n_options (n, arg, (size_t) -1, &default_quoting_options);
-}
-
-char *
-quotearg (char const *arg)
-{
-  return quotearg_n (0, arg);
-}
-
-/* Return quoting options for STYLE, with no extra quoting.  */
-static struct quoting_options
-quoting_options_from_style (enum quoting_style style)
-{
-  struct quoting_options o;
-  o.style = style;
-  memset (o.quote_these_too, 0, sizeof o.quote_these_too);
-  return o;
-}
-
-char *
-quotearg_n_style (int n, enum quoting_style s, char const *arg)
-{
-  struct quoting_options const o = quoting_options_from_style (s);
-  return quotearg_n_options (n, arg, (size_t) -1, &o);
-}
-
-char *
-quotearg_n_style_mem (int n, enum quoting_style s,
-		      char const *arg, size_t argsize)
-{
-  struct quoting_options const o = quoting_options_from_style (s);
-  return quotearg_n_options (n, arg, argsize, &o);
-}
-
-char *
-quotearg_style (enum quoting_style s, char const *arg)
-{
-  return quotearg_n_style (0, s, arg);
-}
-
-char *
-quotearg_char (char const *arg, char ch)
-{
-  struct quoting_options options;
-  options = default_quoting_options;
-  set_char_quoting (&options, ch, 1);
-  return quotearg_n_options (0, arg, (size_t) -1, &options);
-}
-
-char *
-quotearg_colon (char const *arg)
-{
-  return quotearg_char (arg, ':');
-}

lib/quotearg.h

@@ -1,100 +0,0 @@
-/* quotearg.h - quote arguments for output
-   Copyright (C) 1998, 1999 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by Paul Eggert <eggert@twinsun.com> */
-
-/* Basic quoting styles.  */
-enum quoting_style
-  {
-    literal_quoting_style,	/* --quoting-style=literal */
-    shell_quoting_style,	/* --quoting-style=shell */
-    shell_always_quoting_style,	/* --quoting-style=shell-always */
-    c_quoting_style,		/* --quoting-style=c */
-    escape_quoting_style	/* --quoting-style=escape */
-  };
-
-/* For now, --quoting-style=literal is the default, but
-   this is planned to change to --quoting-style=shell in the future.  */
-#ifndef DEFAULT_QUOTING_STYLE
-# define DEFAULT_QUOTING_STYLE literal_quoting_style
-#endif
-
-/* Names of quoting styles and their corresponding values.  */
-extern char const *const quoting_style_args[];
-extern enum quoting_style const quoting_style_vals[];
-
-struct quoting_options;
-
-#ifndef PARAMS
-# if defined PROTOTYPES || defined __STDC__
-#  define PARAMS(Args) Args
-# else
-#  define PARAMS(Args) ()
-# endif
-#endif
-
-/* The functions listed below set and use a hidden variable
-   that contains the default quoting style options.  */
-
-/* Allocate a new set of quoting options, with contents initially identical
-   to O if O is not null, or to the default if O is null.
-   It is the caller's responsibility to free the result.  */
-struct quoting_options *clone_quoting_options
-   PARAMS ((struct quoting_options *o));
-
-/* Get the value of O's quoting style.  If O is null, use the default.  */
-enum quoting_style get_quoting_style PARAMS ((struct quoting_options *o));
-
-/* In O (or in the default if O is null),
-   set the value of the quoting style to S.  */
-void set_quoting_style PARAMS ((struct quoting_options *o,
-				enum quoting_style s));
-
-/* In O (or in the default if O is null),
-   set the value of the quoting options for character C to I.
-   Return the old value.  Currently, the only values defined for I are
-   0 (the default) and 1 (which means to quote the character even if
-   it would not otherwise be quoted).  */
-int set_char_quoting PARAMS ((struct quoting_options *o, char c, int i));
-
-/* Place into buffer BUFFER (of size BUFFERSIZE) a quoted version of
-   argument ARG (of size ARGSIZE), using O to control quoting.
-   If O is null, use the default.
-   Terminate the output with a null character, and return the written
-   size of the output, not counting the terminating null.
-   If BUFFERSIZE is too small to store the output string, return the
-   value that would have been returned had BUFFERSIZE been large enough.
-   If ARGSIZE is -1, use the string length of the argument for ARGSIZE.  */
-size_t quotearg_buffer PARAMS ((char *buffer, size_t buffersize,
-				char const *arg, size_t argsize,
-				struct quoting_options const *o));
-
-/* Use storage slot N to return a quoted version of the string ARG.
-   Use the default quoting options.
-   The returned value points to static storage that can be
-   reused by the next call to this function with the same value of N.
-   N must be nonnegative.  */
-char *quotearg_n PARAMS ((unsigned int n, char const *arg));
-
-/* Equivalent to quotearg_n (0, ARG).  */
-char *quotearg PARAMS ((char const *arg));
-
-/* Like quotearg (ARG), except also quote any instances of CH.  */
-char *quotearg_char PARAMS ((char const *arg, char ch));
-
-/* Equivalent to quotearg_char (ARG, ':').  */
-char *quotearg_colon PARAMS ((char const *arg));

lib/safe-read.h

@@ -1,10 +0,0 @@
-#ifndef PARAMS
-# if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-#  define PARAMS(Args) Args
-# else
-#  define PARAMS(Args) ()
-# endif
-#endif
-
-ssize_t full_write PARAMS ((int desc, const char *ptr, size_t len));
-ssize_t safe_read PARAMS ((int desc, void *ptr, size_t len));

lib/savedir.c

@@ -1,129 +0,0 @@
-/* savedir.c -- save the list of files in a directory in a string
-
-   Copyright 1990, 1997, 1998, 1999, 2000, 2001 Free Software
-   Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by David MacKenzie <djm@gnu.ai.mit.edu>. */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <sys/types.h>
-
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-
-#if HAVE_DIRENT_H
-# include <dirent.h>
-#else
-# define dirent direct
-# if HAVE_SYS_NDIR_H
-#  include <sys/ndir.h>
-# endif
-# if HAVE_SYS_DIR_H
-#  include <sys/dir.h>
-# endif
-# if HAVE_NDIR_H
-#  include <ndir.h>
-# endif
-#endif
-
-#ifdef CLOSEDIR_VOID
-/* Fake a return value. */
-# define CLOSEDIR(d) (closedir (d), 0)
-#else
-# define CLOSEDIR(d) closedir (d)
-#endif
-
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <string.h>
-#endif
-#ifndef NULL
-# define NULL 0
-#endif
-
-#include "savedir.h"
-#include "xalloc.h"
-
-/* Return a freshly allocated string containing the filenames
-   in directory DIR, separated by '\0' characters;
-   the end is marked by two '\0' characters in a row.
-   Return NULL (setting errno) if DIR cannot be opened, read, or closed.  */
-
-#ifndef NAME_SIZE_DEFAULT
-# define NAME_SIZE_DEFAULT 512
-#endif
-
-char *
-savedir (const char *dir)
-{
-  DIR *dirp;
-  struct dirent *dp;
-  char *name_space;
-  size_t allocated = NAME_SIZE_DEFAULT;
-  size_t used = 0;
-  int save_errno;
-
-  dirp = opendir (dir);
-  if (dirp == NULL)
-    return NULL;
-
-  name_space = xmalloc (allocated);
-
-  errno = 0;
-  while ((dp = readdir (dirp)) != NULL)
-    {
-      /* Skip "", ".", and "..".  "" is returned by at least one buggy
-         implementation: Solaris 2.4 readdir on NFS filesystems.  */
-      char const *entry = dp->d_name;
-      if (entry[entry[0] != '.' ? 0 : entry[1] != '.' ? 1 : 2] != '\0')
-	{
-	  size_t entry_size = strlen (entry) + 1;
-	  if (used + entry_size < used)
-	    xalloc_die ();
-	  if (allocated <= used + entry_size)
-	    {
-	      do
-		{
-		  if (2 * allocated < allocated)
-		    xalloc_die ();
-		  allocated *= 2;
-		}
-	      while (allocated <= used + entry_size);
-
-	      name_space = xrealloc (name_space, allocated);
-	    }
-	  memcpy (name_space + used, entry, entry_size);
-	  used += entry_size;
-	}
-    }
-  name_space[used] = '\0';
-  save_errno = errno;
-  if (CLOSEDIR (dirp) != 0)
-    save_errno = errno;
-  if (save_errno != 0)
-    {
-      free (name_space);
-      errno = save_errno;
-      return NULL;
-    }
-  return name_space;
-}

lib/savedir.h

@@ -1,14 +0,0 @@
-#if !defined SAVEDIR_H_
-# define SAVEDIR_H_
-
-# ifndef PARAMS
-#  if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-#   define PARAMS(Args) Args
-#  else
-#   define PARAMS(Args) ()
-#  endif
-# endif
-
-char *savedir PARAMS ((const char *dir));
-
-#endif

lib/strtoimax.c

@@ -1,101 +0,0 @@
-/* Convert string representation of a number into an intmax_t value.
-
-   Copyright (C) 1999, 2001 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by Paul Eggert. */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-
-#if HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-
-#ifndef PARAMS
-# if defined PROTOTYPES || defined __STDC__
-#  define PARAMS(Args) Args
-# else
-#  define PARAMS(Args) ()
-# endif
-#endif
-
-/* Verify a requirement at compile-time (unlike assert, which is runtime).  */
-#define verify(name, assertion) struct name { char a[(assertion) ? 1 : -1]; }
-
-#ifdef UNSIGNED
-# ifndef HAVE_DECL_STRTOUL
-"this configure-time declaration test was not run"
-# endif
-# if !HAVE_DECL_STRTOUL
-unsigned long strtoul PARAMS ((char const *, char **, int));
-# endif
-# ifndef HAVE_DECL_STRTOULL
-"this configure-time declaration test was not run"
-# endif
-# if !HAVE_DECL_STRTOULL && HAVE_UNSIGNED_LONG_LONG
-unsigned long long strtoull PARAMS ((char const *, char **, int));
-# endif
-
-#else
-
-# ifndef HAVE_DECL_STRTOL
-"this configure-time declaration test was not run"
-# endif
-# if !HAVE_DECL_STRTOL
-long strtol PARAMS ((char const *, char **, int));
-# endif
-# ifndef HAVE_DECL_STRTOLL
-"this configure-time declaration test was not run"
-# endif
-# if !HAVE_DECL_STRTOLL && HAVE_LONG_LONG
-long long strtoll PARAMS ((char const *, char **, int));
-# endif
-#endif
-
-#ifdef UNSIGNED
-# undef HAVE_LONG_LONG
-# define HAVE_LONG_LONG HAVE_UNSIGNED_LONG_LONG
-# define INT uintmax_t
-# define strtoimax strtoumax
-# define strtol strtoul
-# define strtoll strtoull
-#else
-# define INT intmax_t
-#endif
-
-INT
-strtoimax (char const *ptr, char **endptr, int base)
-{
-#if HAVE_LONG_LONG
-  verify (size_is_that_of_long_or_long_long,
-	  (sizeof (INT) == sizeof (long)
-	   || sizeof (INT) == sizeof (long long)));
-
-  if (sizeof (INT) != sizeof (long))
-    return strtoll (ptr, endptr, base);
-#else
-  verify (size_is_that_of_long,
-	  sizeof (INT) == sizeof (long));
-#endif
-
-  return strtol (ptr, endptr, base);
-}

lib/strtoumax.c

@@ -1,2 +0,0 @@
-#define UNSIGNED 1
-#include "strtoimax.c"

lib/unicodeio.c

@@ -1,263 +0,0 @@
-/* Unicode character output to streams with locale dependent encoding.
-
-   Copyright (C) 2000-2002 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU Library General Public License as published
-   by the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-   USA.  */
-
-/* Written by Bruno Haible <haible@clisp.cons.org>.  */
-
-/* Note: This file requires the locale_charset() function.  See in
-   libiconv-1.7/libcharset/INTEGRATE for how to obtain it.  */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if HAVE_STDDEF_H
-# include <stddef.h>
-#endif
-
-#include <stdio.h>
-#if HAVE_STRING_H
-# include <string.h>
-#else
-# include <strings.h>
-#endif
-
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-
-#if HAVE_ICONV
-# include <iconv.h>
-#endif
-
-#include <error.h>
-
-#if ENABLE_NLS
-# include <libintl.h>
-#else
-# define gettext(Text) Text
-#endif
-#define _(Text) gettext (Text)
-#define N_(Text) Text
-
-/* Specification.  */
-#include "unicodeio.h"
-
-/* When we pass a Unicode character to iconv(), we must pass it in a
-   suitable encoding. The standardized Unicode encodings are
-   UTF-8, UCS-2, UCS-4, UTF-16, UTF-16BE, UTF-16LE, UTF-7.
-   UCS-2 supports only characters up to \U0000FFFF.
-   UTF-16 and variants support only characters up to \U0010FFFF.
-   UTF-7 is way too complex and not supported by glibc-2.1.
-   UCS-4 specification leaves doubts about endianness and byte order
-   mark. glibc currently interprets it as big endian without byte order
-   mark, but this is not backed by an RFC.
-   So we use UTF-8. It supports characters up to \U7FFFFFFF and is
-   unambiguously defined.  */
-
-/* Stores the UTF-8 representation of the Unicode character wc in r[0..5].
-   Returns the number of bytes stored, or -1 if wc is out of range.  */
-static int
-utf8_wctomb (unsigned char *r, unsigned int wc)
-{
-  int count;
-
-  if (wc < 0x80)
-    count = 1;
-  else if (wc < 0x800)
-    count = 2;
-  else if (wc < 0x10000)
-    count = 3;
-  else if (wc < 0x200000)
-    count = 4;
-  else if (wc < 0x4000000)
-    count = 5;
-  else if (wc <= 0x7fffffff)
-    count = 6;
-  else
-    return -1;
-
-  switch (count)
-    {
-      /* Note: code falls through cases! */
-      case 6: r[5] = 0x80 | (wc & 0x3f); wc = wc >> 6; wc |= 0x4000000;
-      case 5: r[4] = 0x80 | (wc & 0x3f); wc = wc >> 6; wc |= 0x200000;
-      case 4: r[3] = 0x80 | (wc & 0x3f); wc = wc >> 6; wc |= 0x10000;
-      case 3: r[2] = 0x80 | (wc & 0x3f); wc = wc >> 6; wc |= 0x800;
-      case 2: r[1] = 0x80 | (wc & 0x3f); wc = wc >> 6; wc |= 0xc0;
-      case 1: r[0] = wc;
-    }
-
-  return count;
-}
-
-/* Luckily, the encoding's name is platform independent.  */
-#define UTF8_NAME "UTF-8"
-
-/* Converts the Unicode character CODE to its multibyte representation
-   in the current locale and calls the SUCCESS callback on the resulting
-   byte sequence.  If an error occurs, invokes the FAILURE callback instead,
-   passing it CODE and an English error string.
-   Returns whatever the callback returned.
-   Assumes that the locale doesn't change between two calls.  */
-long
-unicode_to_mb (unsigned int code,
-	       long (*success) PARAMS ((const char *buf, size_t buflen,
-					void *callback_arg)),
-	       long (*failure) PARAMS ((unsigned int code, const char *msg,
-					void *callback_arg)),
-	       void *callback_arg)
-{
-  static int initialized;
-  static int is_utf8;
-#if HAVE_ICONV
-  static iconv_t utf8_to_local;
-#endif
-
-  char inbuf[6];
-  int count;
-
-  if (!initialized)
-    {
-      extern const char *locale_charset PARAMS ((void));
-      const char *charset = locale_charset ();
-
-      is_utf8 = !strcmp (charset, UTF8_NAME);
-#if HAVE_ICONV
-      if (!is_utf8)
-	{
-	  utf8_to_local = iconv_open (charset, UTF8_NAME);
-	  if (utf8_to_local == (iconv_t)(-1))
-	    /* For an unknown encoding, assume ASCII.  */
-	    utf8_to_local = iconv_open ("ASCII", UTF8_NAME);
-	}
-#endif
-      initialized = 1;
-    }
-
-  /* Test whether the utf8_to_local converter is available at all.  */
-  if (!is_utf8)
-    {
-#if HAVE_ICONV
-      if (utf8_to_local == (iconv_t)(-1))
-	return failure (code, N_("iconv function not usable"), callback_arg);
-#else
-      return failure (code, N_("iconv function not available"), callback_arg);
-#endif
-    }
-
-  /* Convert the character to UTF-8.  */
-  count = utf8_wctomb ((unsigned char *) inbuf, code);
-  if (count < 0)
-    return failure (code, N_("character out of range"), callback_arg);
-
-#if HAVE_ICONV
-  if (!is_utf8)
-    {
-      char outbuf[25];
-      const char *inptr;
-      size_t inbytesleft;
-      char *outptr;
-      size_t outbytesleft;
-      size_t res;
-
-      inptr = inbuf;
-      inbytesleft = count;
-      outptr = outbuf;
-      outbytesleft = sizeof (outbuf);
-
-      /* Convert the character from UTF-8 to the locale's charset.  */
-      res = iconv (utf8_to_local,
-		   (ICONV_CONST char **)&inptr, &inbytesleft,
-		   &outptr, &outbytesleft);
-      if (inbytesleft > 0 || res == (size_t)(-1)
-	  /* Irix iconv() inserts a NUL byte if it cannot convert. */
-# if !defined _LIBICONV_VERSION && (defined sgi || defined __sgi)
-	  || (res > 0 && code != 0 && outptr - outbuf == 1 && *outbuf == '\0')
-# endif
-         )
-	return failure (code, NULL, callback_arg);
-
-      /* Avoid glibc-2.1 bug and Solaris 2.7 bug.  */
-# if defined _LIBICONV_VERSION \
-    || !((__GLIBC__ - 0 == 2 && __GLIBC_MINOR__ - 0 <= 1) || defined __sun)
-
-      /* Get back to the initial shift state.  */
-      res = iconv (utf8_to_local, NULL, NULL, &outptr, &outbytesleft);
-      if (res == (size_t)(-1))
-	return failure (code, NULL, callback_arg);
-# endif
-
-      return success (outbuf, outptr - outbuf, callback_arg);
-    }
-#endif
-
-  /* At this point, is_utf8 is true, so no conversion is needed.  */
-  return success (inbuf, count, callback_arg);
-}
-
-/* Simple success callback that outputs the converted string.
-   The STREAM is passed as callback_arg.  */
-long
-fwrite_success_callback (const char *buf, size_t buflen, void *callback_arg)
-{
-  FILE *stream = (FILE *) callback_arg;
-
-  fwrite (buf, 1, buflen, stream);
-  return 0;
-}
-
-/* Simple failure callback that displays an error and exits.  */
-static long
-exit_failure_callback (unsigned int code, const char *msg, void *callback_arg)
-{
-  if (msg == NULL)
-    error (1, 0, _("cannot convert U+%04X to local character set"), code);
-  else
-    error (1, 0, _("cannot convert U+%04X to local character set: %s"), code,
-	   gettext (msg));
-  return -1;
-}
-
-/* Simple failure callback that displays a fallback representation in plain
-   ASCII, using the same notation as ISO C99 strings.  */
-static long
-fallback_failure_callback (unsigned int code, const char *msg, void *callback_arg)
-{
-  FILE *stream = (FILE *) callback_arg;
-
-  if (code < 0x10000)
-    fprintf (stream, "\\u%04X", code);
-  else
-    fprintf (stream, "\\U%08X", code);
-  return -1;
-}
-
-/* Outputs the Unicode character CODE to the output stream STREAM.
-   Upon failure, exit if exit_on_error is true, otherwise output a fallback
-   notation.  */
-void
-print_unicode_char (FILE *stream, unsigned int code, int exit_on_error)
-{
-  unicode_to_mb (code, fwrite_success_callback,
-		 exit_on_error
-		 ? exit_failure_callback
-		 : fallback_failure_callback,
-		 stream);
-}

lib/unicodeio.h

@@ -1,44 +0,0 @@
-/* Unicode character output to streams with locale dependent encoding.
-
-   Copyright (C) 2000-2002 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU Library General Public License as published
-   by the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
-   USA.  */
-
-#ifndef UNICODEIO_H
-# define UNICODEIO_H
-
-# include <stdio.h>
-
-# ifndef PARAMS
-#  if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-#   define PARAMS(Args) Args
-#  else
-#   define PARAMS(Args) ()
-#  endif
-# endif
-
-/* Outputs the Unicode character CODE to the output stream STREAM.
-   Upon failure, exit if exit_on_error is true, otherwise output a fallback
-   notation.  */
-extern void print_unicode_char PARAMS ((FILE *stream, unsigned int code,
-					int exit_on_error));
-
-/* Simple success callback that outputs the converted string.
-   The STREAM is passed as callback_arg.  */
-extern long fwrite_success_callback PARAMS ((const char *buf, size_t buflen,
-					     void *callback_arg));
-
-#endif

lib/waitpid.c

@@ -1,75 +0,0 @@
-/* Emulate waitpid on systems that just have wait.
-   Copyright 1994, 1995, 1998, 1999, 2007 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; see the file COPYING.
-   If not, write to the Free Software Foundation, 
-   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-
-#define WAITPID_CHILDREN 8
-static pid_t waited_pid[WAITPID_CHILDREN];
-static int waited_status[WAITPID_CHILDREN];
-
-pid_t
-waitpid (pid_t pid, int *stat_loc, int options)
-{
-  int i;
-  pid_t p;
-
-  if (!options && (pid == -1 || 0 < pid))
-    {
-      /* If we have already waited for this child, return it immediately.  */
-      for (i = 0;  i < WAITPID_CHILDREN;  i++)
-	{
-	  p = waited_pid[i];
-	  if (p && (p == pid || pid == -1))
-	    {
-	      waited_pid[i] = 0;
-	      goto success;
-	    }
-	}
-
-      /* The child has not returned yet; wait for it, accumulating status.  */
-      for (i = 0;  i < WAITPID_CHILDREN;  i++)
-	if (! waited_pid[i])
-	  {
-	    p = wait (&waited_status[i]);
-	    if (p < 0)
-	      return p;
-	    if (p == pid || pid == -1)
-	      goto success;
-	    waited_pid[i] = p;
-	  }
-    }
-
-  /* We cannot emulate this wait call, e.g. because of too many children.  */
-  errno = EINVAL;
-  return -1;
-
-success:
-  if (stat_loc)
-    *stat_loc = waited_status[i];
-  return p;
-}

lib/xalloc.h

@@ -1,87 +0,0 @@
-/* xalloc.h -- malloc with out-of-memory checking
-   Copyright (C) 1990-1998, 1999, 2000 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef XALLOC_H_
-# define XALLOC_H_
-
-# ifndef PARAMS
-#  if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-#   define PARAMS(Args) Args
-#  else
-#   define PARAMS(Args) ()
-#  endif
-# endif
-
-# ifndef __attribute__
-#  if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) || __STRICT_ANSI__
-#   define __attribute__(x)
-#  endif
-# endif
-
-# ifndef ATTRIBUTE_NORETURN
-#  define ATTRIBUTE_NORETURN __attribute__ ((__noreturn__))
-# endif
-
-/* Exit value when the requested amount of memory is not available.
-   It is initialized to EXIT_FAILURE, but the caller may set it to
-   some other value.  */
-extern int xalloc_exit_failure;
-
-/* If this pointer is non-zero, run the specified function upon each
-   allocation failure.  It is initialized to zero. */
-extern void (*xalloc_fail_func) PARAMS ((void));
-
-/* If XALLOC_FAIL_FUNC is undefined or a function that returns, this
-   message is output.  It is translated via gettext.
-   Its value is "memory exhausted".  */
-extern char const xalloc_msg_memory_exhausted[];
-
-/* This function is always triggered when memory is exhausted.  It is
-   in charge of honoring the three previous items.  This is the
-   function to call when one wants the program to die because of a
-   memory allocation failure.  */
-extern void xalloc_die PARAMS ((void)) ATTRIBUTE_NORETURN;
-
-void *xmalloc PARAMS ((size_t n));
-void *xcalloc PARAMS ((size_t n, size_t s));
-void *xrealloc PARAMS ((void *p, size_t n));
-char *xstrdup PARAMS ((const char *str));
-
-# define XMALLOC(Type, N_items) ((Type *) xmalloc (sizeof (Type) * (N_items)))
-# define XCALLOC(Type, N_items) ((Type *) xcalloc (sizeof (Type), (N_items)))
-# define XREALLOC(Ptr, Type, N_items) \
-  ((Type *) xrealloc ((void *) (Ptr), sizeof (Type) * (N_items)))
-
-/* Declare and alloc memory for VAR of type TYPE. */
-# define NEW(Type, Var)  Type *(Var) = XMALLOC (Type, 1)
-
-/* Free VAR only if non NULL. */
-# define XFREE(Var)	\
-   do {                 \
-      if (Var)          \
-        free (Var);     \
-   } while (0)
-
-/* Return a pointer to a malloc'ed copy of the array SRC of NUM elements. */
-# define CCLONE(Src, Num) \
-  (memcpy (xmalloc (sizeof (*Src) * (Num)), (Src), sizeof (*Src) * (Num)))
-
-/* Return a malloc'ed copy of SRC. */
-# define CLONE(Src) CCLONE (Src, 1)
-
-
-#endif /* !XALLOC_H_ */

lib/xgetcwd.c

@@ -1,79 +0,0 @@
-/* xgetcwd.c -- return current directory with unlimited length
-   Copyright (C) 1992, 1996, 2000, 2001 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by David MacKenzie <djm@gnu.ai.mit.edu>.  */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-
-#include <sys/types.h>
-
-#if HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-
-#if HAVE_GETCWD
-char *getcwd ();
-#else
-char *getwd ();
-# define getcwd(Buf, Max) getwd (Buf)
-#endif
-
-#include "xalloc.h"
-
-/* Return the current directory, newly allocated, arbitrarily long.
-   Return NULL and set errno on error. */
-
-char *
-xgetcwd ()
-{
-#if defined __GLIBC__ && __GLIBC__ >= 2
-  return getcwd (NULL, 0);
-#else
-  size_t buf_size = 128;  /* must be a power of 2 */
-  char *buf = NULL;
-
-  while (1)
-    {
-      char *cwd;
-      buf = (char *) xrealloc (buf, buf_size);
-
-      cwd = getcwd (buf, buf_size);
-      if (cwd != NULL)
-	return cwd;
-      if (errno != ERANGE)
-	{
-	  free (buf);
-	  return NULL;
-	}
-
-      buf_size *= 2;
-      if (buf_size == 0)
-	xalloc_die ();
-    }
-#endif
-}

lib/xmalloc.c

@@ -1,116 +0,0 @@
-/* xmalloc.c -- malloc with out of memory checking
-   Copyright (C) 1990-1999, 2000 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <sys/types.h>
-
-#if STDC_HEADERS
-# include <stdlib.h>
-#else
-void *calloc ();
-void *malloc ();
-void *realloc ();
-void free ();
-#endif
-
-#if ENABLE_NLS
-# include <libintl.h>
-# define _(Text) gettext (Text)
-#else
-# define textdomain(Domain)
-# define _(Text) Text
-#endif
-#define N_(Text) Text
-
-#include "error.h"
-#include "xalloc.h"
-
-#ifndef EXIT_FAILURE
-# define EXIT_FAILURE 1
-#endif
-
-#ifndef HAVE_DONE_WORKING_MALLOC_CHECK
-"you must run the autoconf test for a properly working malloc -- see malloc.m4"
-#endif
-
-#ifndef HAVE_DONE_WORKING_REALLOC_CHECK
-"you must run the autoconf test for a properly working realloc --see realloc.m4"
-#endif
-
-/* Exit value when the requested amount of memory is not available.
-   The caller may set it to some other value.  */
-int xalloc_exit_failure = EXIT_FAILURE;
-
-/* If non NULL, call this function when memory is exhausted. */
-void (*xalloc_fail_func) PARAMS ((void)) = 0;
-
-/* If XALLOC_FAIL_FUNC is NULL, or does return, display this message
-   before exiting when memory is exhausted.  Goes through gettext. */
-char const xalloc_msg_memory_exhausted[] = N_("memory exhausted");
-
-void
-xalloc_die (void)
-{
-  if (xalloc_fail_func)
-    (*xalloc_fail_func) ();
-  error (xalloc_exit_failure, 0, "%s", _(xalloc_msg_memory_exhausted));
-  /* The `noreturn' cannot be given to error, since it may return if
-     its first argument is 0.  To help compilers understand the
-     xalloc_die does terminate, call exit. */
-  exit (EXIT_FAILURE);
-}
-
-/* Allocate N bytes of memory dynamically, with error checking.  */
-
-void *
-xmalloc (size_t n)
-{
-  void *p;
-
-  p = malloc (n);
-  if (p == 0)
-    xalloc_die ();
-  return p;
-}
-
-/* Change the size of an allocated block of memory P to N bytes,
-   with error checking.  */
-
-void *
-xrealloc (void *p, size_t n)
-{
-  p = realloc (p, n);
-  if (p == 0)
-    xalloc_die ();
-  return p;
-}
-
-/* Allocate memory for N elements of S bytes, with error checking.  */
-
-void *
-xcalloc (size_t n, size_t s)
-{
-  void *p;
-
-  p = calloc (n, s);
-  if (p == 0)
-    xalloc_die ();
-  return p;
-}

lib/xstrtol.c

@@ -1,288 +0,0 @@
-/* A more useful interface to strtol.
-   Copyright (C) 1995, 1996, 1998-2001 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* Written by Jim Meyering. */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#ifndef __strtol
-# define __strtol strtol
-# define __strtol_t long int
-# define __xstrtol xstrtol
-#endif
-
-/* Some pre-ANSI implementations (e.g. SunOS 4)
-   need stderr defined if assertion checking is enabled.  */
-#include <stdio.h>
-
-#if STDC_HEADERS
-# include <stdlib.h>
-#endif
-
-#if HAVE_STRING_H
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef strchr
-#  define strchr index
-# endif
-#endif
-
-#include <assert.h>
-#include <ctype.h>
-
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-
-#if HAVE_LIMITS_H
-# include <limits.h>
-#endif
-
-#ifndef CHAR_BIT
-# define CHAR_BIT 8
-#endif
-
-/* The extra casts work around common compiler bugs.  */
-#define TYPE_SIGNED(t) (! ((t) 0 < (t) -1))
-/* The outer cast is needed to work around a bug in Cray C 5.0.3.0.
-   It is necessary at least when t == time_t.  */
-#define TYPE_MINIMUM(t) ((t) (TYPE_SIGNED (t) \
-			      ? ~ (t) 0 << (sizeof (t) * CHAR_BIT - 1) : (t) 0))
-#define TYPE_MAXIMUM(t) (~ (t) 0 - TYPE_MINIMUM (t))
-
-#if defined (STDC_HEADERS) || (!defined (isascii) && !defined (HAVE_ISASCII))
-# define IN_CTYPE_DOMAIN(c) 1
-#else
-# define IN_CTYPE_DOMAIN(c) isascii(c)
-#endif
-
-#define ISSPACE(c) (IN_CTYPE_DOMAIN (c) && isspace (c))
-
-#include "xstrtol.h"
-
-#if !HAVE_DECL_STRTOL && !defined strtol
-long int strtol ();
-#endif
-
-#if !HAVE_DECL_STRTOUL && !defined strtoul
-unsigned long int strtoul ();
-#endif
-
-#if !HAVE_DECL_STRTOIMAX && !defined strtoimax
-intmax_t strtoimax ();
-#endif
-
-#if !HAVE_DECL_STRTOUMAX && !defined strtoumax
-uintmax_t strtoumax ();
-#endif
-
-static int
-bkm_scale (__strtol_t *x, int scale_factor)
-{
-  __strtol_t product = *x * scale_factor;
-  if (*x != product / scale_factor)
-    return 1;
-  *x = product;
-  return 0;
-}
-
-static int
-bkm_scale_by_power (__strtol_t *x, int base, int power)
-{
-  while (power--)
-    if (bkm_scale (x, base))
-      return 1;
-
-  return 0;
-}
-
-/* FIXME: comment.  */
-
-strtol_error
-__xstrtol (const char *s, char **ptr, int strtol_base,
-	   __strtol_t *val, const char *valid_suffixes)
-{
-  char *t_ptr;
-  char **p;
-  __strtol_t tmp;
-
-  assert (0 <= strtol_base && strtol_base <= 36);
-
-  p = (ptr ? ptr : &t_ptr);
-
-  if (! TYPE_SIGNED (__strtol_t))
-    {
-      const char *q = s;
-      while (ISSPACE ((unsigned char) *q))
-	++q;
-      if (*q == '-')
-	return LONGINT_INVALID;
-    }
-
-  errno = 0;
-  tmp = __strtol (s, p, strtol_base);
-  if (errno != 0)
-    return LONGINT_OVERFLOW;
-  if (*p == s)
-    return LONGINT_INVALID;
-
-  /* Let valid_suffixes == NULL mean `allow any suffix'.  */
-  /* FIXME: update all callers except the ones that allow suffixes
-     after the number, changing last parameter NULL to `""'.  */
-  if (!valid_suffixes)
-    {
-      *val = tmp;
-      return LONGINT_OK;
-    }
-
-  if (**p != '\0')
-    {
-      int base = 1024;
-      int suffixes = 1;
-      int overflow;
-
-      if (!strchr (valid_suffixes, **p))
-	{
-	  *val = tmp;
-	  return LONGINT_INVALID_SUFFIX_CHAR;
-	}
-
-      if (strchr (valid_suffixes, '0'))
-	{
-	  /* The ``valid suffix'' '0' is a special flag meaning that
-	     an optional second suffix is allowed, which can change
-	     the base, e.g. "100MD" for 100 megabytes decimal.  */
-
-	  switch (p[0][1])
-	    {
-	    case 'B':
-	      suffixes++;
-	      break;
-
-	    case 'D':
-	      base = 1000;
-	      suffixes++;
-	      break;
-	    }
-	}
-
-      switch (**p)
-	{
-	case 'b':
-	  overflow = bkm_scale (&tmp, 512);
-	  break;
-
-	case 'B':
-	  overflow = bkm_scale (&tmp, 1024);
-	  break;
-
-	case 'c':
-	  overflow = 0;
-	  break;
-
-	case 'E': /* Exa */
-	  overflow = bkm_scale_by_power (&tmp, base, 6);
-	  break;
-
-	case 'G': /* Giga */
-	case 'g': /* 'g' is undocumented; for compatibility only */
-	  overflow = bkm_scale_by_power (&tmp, base, 3);
-	  break;
-
-	case 'k': /* kilo */
-	  overflow = bkm_scale_by_power (&tmp, base, 1);
-	  break;
-
-	case 'M': /* Mega */
-	case 'm': /* 'm' is undocumented; for compatibility only */
-	  overflow = bkm_scale_by_power (&tmp, base, 2);
-	  break;
-
-	case 'P': /* Peta */
-	  overflow = bkm_scale_by_power (&tmp, base, 5);
-	  break;
-
-	case 'T': /* Tera */
-	case 't': /* 't' is undocumented; for compatibility only */
-	  overflow = bkm_scale_by_power (&tmp, base, 4);
-	  break;
-
-	case 'w':
-	  overflow = bkm_scale (&tmp, 2);
-	  break;
-
-	case 'Y': /* Yotta */
-	  overflow = bkm_scale_by_power (&tmp, base, 8);
-	  break;
-
-	case 'Z': /* Zetta */
-	  overflow = bkm_scale_by_power (&tmp, base, 7);
-	  break;
-
-	default:
-	  *val = tmp;
-	  return LONGINT_INVALID_SUFFIX_CHAR;
-	  break;
-	}
-
-      if (overflow)
-	return LONGINT_OVERFLOW;
-
-      (*p) += suffixes;
-    }
-
-  *val = tmp;
-  return LONGINT_OK;
-}
-
-#ifdef TESTING_XSTRTO
-
-# include <stdio.h>
-# include "error.h"
-
-char *program_name;
-
-int
-main (int argc, char** argv)
-{
-  strtol_error s_err;
-  int i;
-
-  program_name = argv[0];
-  for (i=1; i<argc; i++)
-    {
-      char *p;
-      __strtol_t val;
-
-      s_err = __xstrtol (argv[i], &p, 0, &val, "bckmw");
-      if (s_err == LONGINT_OK)
-	{
-	  printf ("%s->%lu (%s)\n", argv[i], val, p);
-	}
-      else
-	{
-	  STRTOL_FATAL_ERROR (argv[i], "arg", s_err);
-	}
-    }
-  exit (0);
-}
-
-#endif /* TESTING_XSTRTO */

lib/xstrtol.h

@@ -1,82 +0,0 @@
-/* A more useful interface to strtol.
-   Copyright 1995, 1996, 1998, 1999, 2001 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef XSTRTOL_H_
-# define XSTRTOL_H_ 1
-
-# if HAVE_INTTYPES_H
-#  include <inttypes.h> /* for uintmax_t */
-# endif
-
-# ifndef PARAMS
-#  if defined PROTOTYPES || (defined __STDC__ && __STDC__)
-#   define PARAMS(Args) Args
-#  else
-#   define PARAMS(Args) ()
-#  endif
-# endif
-
-# ifndef _STRTOL_ERROR
-enum strtol_error
-  {
-    LONGINT_OK, LONGINT_INVALID, LONGINT_INVALID_SUFFIX_CHAR, LONGINT_OVERFLOW
-  };
-typedef enum strtol_error strtol_error;
-# endif
-
-# define _DECLARE_XSTRTOL(name, type) \
-  strtol_error \
-    name PARAMS ((const char *s, char **ptr, int base, \
-		  type *val, const char *valid_suffixes));
-_DECLARE_XSTRTOL (xstrtol, long int)
-_DECLARE_XSTRTOL (xstrtoul, unsigned long int)
-_DECLARE_XSTRTOL (xstrtoimax, intmax_t)
-_DECLARE_XSTRTOL (xstrtoumax, uintmax_t)
-
-# define _STRTOL_ERROR(Exit_code, Str, Argument_type_string, Err)	\
-  do									\
-    {									\
-      switch ((Err))							\
-	{								\
-	case LONGINT_OK:						\
-	  abort ();							\
-									\
-	case LONGINT_INVALID:						\
-	  error ((Exit_code), 0, "invalid %s `%s'",			\
-		 (Argument_type_string), (Str));			\
-	  break;							\
-									\
-	case LONGINT_INVALID_SUFFIX_CHAR:				\
-	  error ((Exit_code), 0, "invalid character following %s in `%s'", \
-		 (Argument_type_string), (Str));			\
-	  break;							\
-									\
-	case LONGINT_OVERFLOW:						\
-	  error ((Exit_code), 0, "%s `%s' too large",			\
-		 (Argument_type_string), (Str));			\
-	  break;							\
-	}								\
-    }									\
-  while (0)
-
-# define STRTOL_FATAL_ERROR(Str, Argument_type_string, Err)		\
-  _STRTOL_ERROR (2, Str, Argument_type_string, Err)
-
-# define STRTOL_FAIL_WARN(Str, Argument_type_string, Err)		\
-  _STRTOL_ERROR (0, Str, Argument_type_string, Err)
-
-#endif /* not XSTRTOL_H_ */

m4/c-bs-a.m4

@@ -1,23 +0,0 @@
-#serial 4
-
-dnl From Paul Eggert.
-
-AC_DEFUN([AC_C_BACKSLASH_A],
-[
-  AC_CACHE_CHECK([whether backslash-a works in strings], ac_cv_c_backslash_a,
-   [AC_TRY_COMPILE([],
-     [
-#if '\a' == 'a'
-      syntax error;
-#endif
-      char buf['\a' == 'a' ? -1 : 1];
-      buf[0] = '\a';
-      return buf[0] != "\a"[0];
-     ],
-     ac_cv_c_backslash_a=yes,
-     ac_cv_c_backslash_a=no)])
-  if test $ac_cv_c_backslash_a = yes; then
-    AC_DEFINE(HAVE_C_BACKSLASH_A, 1,
-      [Define if backslash-a works in C strings.])
-  fi
-])

m4/ccstdc.m4

@@ -1,95 +0,0 @@
-# The following is taken from automake 1.4,
-# except that it prefers the compiler option -Ae to "-Aa -D_HPUX_SOURCE"
-# because only the former supports 64-bit integral types on HP-UX 10.20.
-
-## ----------------------------------------- ##
-## ANSIfy the C compiler whenever possible.  ##
-## From Franc,ois Pinard                     ##
-## ----------------------------------------- ##
-
-# serial 2
-
-# @defmac AC_PROG_CC_STDC
-# @maindex PROG_CC_STDC
-# @ovindex CC
-# If the C compiler in not in ANSI C mode by default, try to add an option
-# to output variable @code{CC} to make it so.  This macro tries various
-# options that select ANSI C on some system or another.  It considers the
-# compiler to be in ANSI C mode if it handles function prototypes correctly.
-#
-# If you use this macro, you should check after calling it whether the C
-# compiler has been set to accept ANSI C; if not, the shell variable
-# @code{am_cv_prog_cc_stdc} is set to @samp{no}.  If you wrote your source
-# code in ANSI C, you can make an un-ANSIfied copy of it by using the
-# program @code{ansi2knr}, which comes with Ghostscript.
-# @end defmac
-
-AC_DEFUN(AM_PROG_CC_STDC,
-[AC_REQUIRE([AC_PROG_CC])
-AC_BEFORE([$0], [AC_C_INLINE])
-AC_BEFORE([$0], [AC_C_CONST])
-dnl Force this before AC_PROG_CPP.  Some cpp's, eg on HPUX, require
-dnl a magic option to avoid problems with ANSI preprocessor commands
-dnl like #elif.
-dnl FIXME: can't do this because then AC_AIX won't work due to a
-dnl circular dependency.
-dnl AC_BEFORE([$0], [AC_PROG_CPP])
-AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
-AC_CACHE_VAL(am_cv_prog_cc_stdc,
-[am_cv_prog_cc_stdc=no
-ac_save_CC="$CC"
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX			-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
-  CC="$ac_save_CC $ac_arg"
-  AC_TRY_COMPILE(
-[#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
-     char **p;
-     int i;
-{
-  return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
-  char *s;
-  va_list v;
-  va_start (v,p);
-  s = g (p, va_arg (v,int));
-  va_end (v);
-  return s;
-}
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-], [
-return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-],
-[am_cv_prog_cc_stdc="$ac_arg"; break])
-done
-CC="$ac_save_CC"
-])
-if test -z "$am_cv_prog_cc_stdc"; then
-  AC_MSG_RESULT([none needed])
-else
-  AC_MSG_RESULT($am_cv_prog_cc_stdc)
-fi
-case "x$am_cv_prog_cc_stdc" in
-  x|xno) ;;
-  *) CC="$CC $am_cv_prog_cc_stdc" ;;
-esac
-])

m4/decl.m4

@@ -1,37 +0,0 @@
-#serial 5
-
-AC_DEFUN(jm_CHECK_DECLARATION,
-[
-  AC_MSG_CHECKING([whether $1 is declared])
-  AC_CACHE_VAL(jm_cv_func_decl_$1,
-    [AC_TRY_COMPILE($2,
-      [
-#ifndef $1
-char *(*pfn) = (char *(*)) $1
-#endif
-      ],
-      eval "jm_cv_func_decl_$1=yes",
-      eval "jm_cv_func_decl_$1=no")])
-
-  if eval "test \"`echo '$jm_cv_func_decl_'$1`\" = yes"; then
-    AC_MSG_RESULT(yes)
-    ifelse([$3], , :, [$3])
-  else
-    AC_MSG_RESULT(no)
-    ifelse([$4], , , [$4
-])dnl
-  fi
-])dnl
-
-dnl jm_CHECK_DECLARATIONS(INCLUDES, FUNCTION... [, ACTION-IF-DECLARED
-dnl                       [, ACTION-IF-NOT-DECLARED]])
-AC_DEFUN(jm_CHECK_DECLARATIONS,
-[
-  for jm_func in $2
-  do
-    jm_CHECK_DECLARATION($jm_func, $1,
-    [
-      jm_tr_func=HAVE_DECL_`echo $jm_func | tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ`
-      AC_DEFINE_UNQUOTED($jm_tr_func) $3], $4)dnl
-  done
-])

m4/error.m4

@@ -1,12 +0,0 @@
-#serial 3
-
-dnl FIXME: put these prerequisite-only *.m4 files in a separate
-dnl directory -- otherwise, they'll conflict with existing files.
-
-dnl These are the prerequisite macros for GNU's error.c file.
-AC_DEFUN([jm_PREREQ_ERROR],
-[
-  AC_CHECK_FUNCS(strerror strerror_r vprintf doprnt)
-  AC_FUNC_STRERROR_R
-  AC_HEADER_STDC
-])

m4/fnmatch.m4

@@ -1,24 +0,0 @@
-dnl This is a copy of autoconf 2.13, except we also check that
-dnl FNM_FILE_NAME | FNM_LEADING_DIR works.
-dnl
-undefine([AC_FUNC_FNMATCH])
-AC_DEFUN(AC_FUNC_FNMATCH,
-[AC_CACHE_CHECK(for working GNU-style fnmatch, ac_cv_func_fnmatch_works,
-# Some versions of Solaris, SCO, and the GNU C Library
-# have a broken or incompatible fnmatch.
-# So we run a test program.  If we are cross-compiling, take no chance.
-# Thanks to John Oleynick, Franc,ois Pinard, and Paul Eggert for this test.
-[AC_TRY_RUN([#include <fnmatch.h>
-main() {
-  exit (fnmatch ("a*", "abc", 0) != 0
-	|| fnmatch("d*/*1", "d/s/1", FNM_FILE_NAME) != FNM_NOMATCH
-	|| fnmatch("*", "x", FNM_FILE_NAME | FNM_LEADING_DIR) != 0
-	|| fnmatch("x*", "x/y/z", FNM_FILE_NAME | FNM_LEADING_DIR) != 0
-	|| fnmatch("*c*", "c/x", FNM_FILE_NAME | FNM_LEADING_DIR) != 0);
-}],
-ac_cv_func_fnmatch_works=yes, ac_cv_func_fnmatch_works=no,
-ac_cv_func_fnmatch_works=no)])
-if test $ac_cv_func_fnmatch_works = yes; then
-  AC_DEFINE(HAVE_FNMATCH)
-fi
-])

m4/getcwd.m4

@@ -1,53 +0,0 @@
-# getcwd.m4 - check whether getcwd (NULL, 0) allocates memory for result
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-# Written by Paul Eggert.
-
-AC_DEFUN([AC_FUNC_GETCWD_NULL],
-  [AC_CHECK_HEADERS(stdlib.h unistd.h)
-   AC_CACHE_CHECK([whether getcwd (NULL, 0) allocates memory for result],
-     [ac_cv_func_getcwd_null],
-     [AC_TRY_RUN(
-        [
-#	 ifdef HAVE_STDLIB_H
-#	  include <stdlib.h>
-#	 endif
-#	 ifdef HAVE_UNISTD_H
-#	  include <unistd.h>
-#	 endif
-#	 ifndef getcwd
-	 char *getcwd ();
-#	 endif
-	 int
-	 main ()
-	 {
-	   if (chdir ("/") != 0)
-	     exit (1);
-	   else
-	     {
-	       char *f = getcwd (NULL, 0);
-	       exit (! (f && f[0] == '/' && !f[1]));
-	     }
-	 }],
-	[ac_cv_func_getcwd_null=yes],
-	[ac_cv_func_getcwd_null=no],
-	[ac_cv_func_getcwd_null=no])])
-   if test $ac_cv_func_getcwd_null = yes; then
-     AC_DEFINE(HAVE_GETCWD_NULL, 1,
-	       [Define if getcwd (NULL, 0) allocates memory for result.])
-   fi])

m4/gettext.m4

@@ -1,368 +0,0 @@
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-
-# serial 10
-
-dnl Usage: AM_WITH_NLS([TOOLSYMBOL], [NEEDSYMBOL], [LIBDIR]).
-dnl If TOOLSYMBOL is specified and is 'use-libtool', then a libtool library
-dnl    $(top_builddir)/intl/libintl.la will be created (shared and/or static,
-dnl    depending on --{enable,disable}-{shared,static} and on the presence of
-dnl    AM-DISABLE-SHARED). Otherwise, a static library
-dnl    $(top_builddir)/intl/libintl.a will be created.
-dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
-dnl    implementations (in libc or libintl) without the ngettext() function
-dnl    will be ignored.
-dnl LIBDIR is used to find the intl libraries.  If empty,
-dnl    the value `$(top_builddir)/intl/' is used.
-dnl
-dnl The result of the configuration is one of three cases:
-dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
-dnl    and used.
-dnl    Catalog format: GNU --> install in $(datadir)
-dnl    Catalog extension: .mo after installation, .gmo in source tree
-dnl 2) GNU gettext has been found in the system's C library.
-dnl    Catalog format: GNU --> install in $(datadir)
-dnl    Catalog extension: .mo after installation, .gmo in source tree
-dnl 3) No internationalization, always use English msgid.
-dnl    Catalog format: none
-dnl    Catalog extension: none
-dnl The use of .gmo is historical (it was needed to avoid overwriting the
-dnl GNU format catalogs when building on a platform with an X/Open gettext),
-dnl but we keep it in order not to force irrelevant filename changes on the
-dnl maintainers.
-dnl
-AC_DEFUN([AM_WITH_NLS],
-  [AC_MSG_CHECKING([whether NLS is requested])
-    dnl Default is enabled NLS
-    AC_ARG_ENABLE(nls,
-      [  --disable-nls           do not use Native Language Support],
-      USE_NLS=$enableval, USE_NLS=yes)
-    AC_MSG_RESULT($USE_NLS)
-    AC_SUBST(USE_NLS)
-
-    BUILD_INCLUDED_LIBINTL=no
-    USE_INCLUDED_LIBINTL=no
-    INTLLIBS=
-
-    dnl If we use NLS figure out what method
-    if test "$USE_NLS" = "yes"; then
-      AC_DEFINE(ENABLE_NLS, 1,
-        [Define to 1 if translation of program messages to the user's native language
-   is requested.])
-      AC_MSG_CHECKING([whether included gettext is requested])
-      AC_ARG_WITH(included-gettext,
-        [  --with-included-gettext use the GNU gettext library included here],
-        nls_cv_force_use_gnu_gettext=$withval,
-        nls_cv_force_use_gnu_gettext=no)
-      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-
-      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
-      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
-        dnl User does not insist on using GNU NLS library.  Figure out what
-        dnl to use.  If GNU gettext is available we use this.  Else we have
-        dnl to fall back to GNU NLS library.
-	CATOBJEXT=NONE
-
-        dnl Add a version number to the cache macros.
-        define(gt_cv_func_gnugettext_libc, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libc])
-        define(gt_cv_func_gnugettext_libintl, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libintl])
-
-	AC_CHECK_HEADER(libintl.h,
-	  [AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
-	    [AC_TRY_LINK([#include <libintl.h>
-extern int _nl_msg_cat_cntr;],
-	       [bindtextdomain ("", "");
-return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
-	       gt_cv_func_gnugettext_libc=yes,
-	       gt_cv_func_gnugettext_libc=no)])
-
-	   if test "$gt_cv_func_gnugettext_libc" != "yes"; then
-	     AC_CACHE_CHECK([for GNU gettext in libintl],
-	       gt_cv_func_gnugettext_libintl,
-	       [gt_save_LIBS="$LIBS"
-		LIBS="$LIBS -lintl $LIBICONV"
-		AC_TRY_LINK([#include <libintl.h>
-extern int _nl_msg_cat_cntr;],
-		  [bindtextdomain ("", "");
-return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
-		  gt_cv_func_gnugettext_libintl=yes,
-		  gt_cv_func_gnugettext_libintl=no)
-		LIBS="$gt_save_LIBS"])
-	   fi
-
-	   dnl If an already present or preinstalled GNU gettext() is found,
-	   dnl use it.  But if this macro is used in GNU gettext, and GNU
-	   dnl gettext is already preinstalled in libintl, we update this
-	   dnl libintl.  (Cf. the install rule in intl/Makefile.in.)
-	   if test "$gt_cv_func_gnugettext_libc" = "yes" \
-	      || { test "$gt_cv_func_gnugettext_libintl" = "yes" \
-		   && test "$PACKAGE" != gettext; }; then
-	     AC_DEFINE(HAVE_GETTEXT, 1,
-               [Define if the GNU gettext() function is already present or preinstalled.])
-
-	     if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
-	       dnl If iconv() is in a separate libiconv library, then anyone
-	       dnl linking with libintl{.a,.so} also needs to link with
-	       dnl libiconv.
-	       INTLLIBS="-lintl $LIBICONV"
-	     fi
-
-	     gt_save_LIBS="$LIBS"
-	     LIBS="$LIBS $INTLLIBS"
-	     AC_CHECK_FUNCS(dcgettext)
-	     LIBS="$gt_save_LIBS"
-
-	     dnl Search for GNU msgfmt in the PATH.
-	     AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-	       [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
-	     AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-
-	     dnl Search for GNU xgettext in the PATH.
-	     AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-	       [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)
-
-	     CATOBJEXT=.gmo
-	   fi
-	])
-
-        if test "$CATOBJEXT" = "NONE"; then
-	  dnl GNU gettext is not found in the C library.
-	  dnl Fall back on GNU gettext library.
-	  nls_cv_use_gnu_gettext=yes
-        fi
-      fi
-
-      if test "$nls_cv_use_gnu_gettext" = "yes"; then
-        dnl Mark actions used to generate GNU NLS library.
-        INTLOBJS="\$(GETTOBJS)"
-        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-	  [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
-        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-	  [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)
-        AC_SUBST(MSGFMT)
-	BUILD_INCLUDED_LIBINTL=yes
-	USE_INCLUDED_LIBINTL=yes
-        CATOBJEXT=.gmo
-	INTLLIBS="ifelse([$3],[],\$(top_builddir)/intl,[$3])/libintl.ifelse([$1], use-libtool, [l], [])a $LIBICONV"
-	LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
-      fi
-
-      dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
-      dnl Test whether we really found GNU msgfmt.
-      if test "$GMSGFMT" != ":"; then
-	dnl If it is no GNU msgfmt we define it as : so that the
-	dnl Makefiles still can work.
-	if $GMSGFMT --statistics /dev/null >/dev/null 2>&1; then
-	  : ;
-	else
-	  AC_MSG_RESULT(
-	    [found msgfmt program is not GNU msgfmt; ignore it])
-	  GMSGFMT=":"
-	fi
-      fi
-
-      dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
-      dnl Test whether we really found GNU xgettext.
-      if test "$XGETTEXT" != ":"; then
-	dnl If it is no GNU xgettext we define it as : so that the
-	dnl Makefiles still can work.
-	if $XGETTEXT --omit-header /dev/null >/dev/null 2>&1; then
-	  : ;
-	else
-	  AC_MSG_RESULT(
-	    [found xgettext program is not GNU xgettext; ignore it])
-	  XGETTEXT=":"
-	fi
-      fi
-
-      dnl We need to process the po/ directory.
-      POSUB=po
-    fi
-    AC_OUTPUT_COMMANDS(
-     [for ac_file in $CONFIG_FILES; do
-        # Support "outfile[:infile[:infile...]]"
-        case "$ac_file" in
-          *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-        esac
-        # PO directories have a Makefile.in generated from Makefile.in.in.
-        case "$ac_file" in */Makefile.in)
-          # Adjust a relative srcdir.
-          ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
-          ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
-          ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
-          # In autoconf-2.13 it is called $ac_given_srcdir.
-          # In autoconf-2.50 it is called $srcdir.
-          test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
-          case "$ac_given_srcdir" in
-            .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
-            /*) top_srcdir="$ac_given_srcdir" ;;
-            *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
-          esac
-          if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
-            rm -f "$ac_dir/POTFILES"
-            test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
-            sed -e "/^#/d" -e "/^[ 	]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," -e "\$s/\(.*\) \\\\/\1/" < "$ac_given_srcdir/$ac_dir/POTFILES.in" > "$ac_dir/POTFILES"
-            test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
-            sed -e "/POTFILES =/r $ac_dir/POTFILES" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
-          fi
-          ;;
-        esac
-      done])
-
-
-    dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
-    dnl to 'yes' because some of the testsuite requires it.
-    if test "$PACKAGE" = gettext; then
-      BUILD_INCLUDED_LIBINTL=yes
-    fi
-
-    dnl intl/plural.c is generated from intl/plural.y. It requires bison,
-    dnl because plural.y uses bison specific features. It requires at least
-    dnl bison-1.26 because earlier versions generate a plural.c that doesn't
-    dnl compile.
-    dnl bison is only needed for the maintainer (who touches plural.y). But in
-    dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
-    dnl the rule in general Makefile. Now, some people carelessly touch the
-    dnl files or have a broken "make" program, hence the plural.c rule will
-    dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
-    dnl present or too old.
-    AC_CHECK_PROGS([INTLBISON], [bison])
-    if test -z "$INTLBISON"; then
-      ac_verc_fail=yes
-    else
-      dnl Found it, now check the version.
-      AC_MSG_CHECKING([version of bison])
-changequote(<<,>>)dnl
-      ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison .* \([0-9]*\.[0-9.]*\).*$/\1/p'`
-      case $ac_prog_version in
-        '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
-        1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
-changequote([,])dnl
-           ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
-        *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
-      esac
-      AC_MSG_RESULT([$ac_prog_version])
-    fi
-    if test $ac_verc_fail = yes; then
-      INTLBISON=:
-    fi
-
-    dnl These rules are solely for the distribution goal.  While doing this
-    dnl we only have to keep exactly one list of the available catalogs
-    dnl in configure.in.
-    for lang in $ALL_LINGUAS; do
-      GMOFILES="$GMOFILES $lang.gmo"
-      POFILES="$POFILES $lang.po"
-    done
-
-    dnl Make all variables we use known to autoconf.
-    AC_SUBST(BUILD_INCLUDED_LIBINTL)
-    AC_SUBST(USE_INCLUDED_LIBINTL)
-    AC_SUBST(CATALOGS)
-    AC_SUBST(CATOBJEXT)
-    AC_SUBST(GMOFILES)
-    AC_SUBST(INTLLIBS)
-    AC_SUBST(INTLOBJS)
-    AC_SUBST(POFILES)
-    AC_SUBST(POSUB)
-
-    dnl For backward compatibility. Some configure.ins may be using this.
-    nls_cv_header_intl=
-    nls_cv_header_libgt=
-
-    dnl For backward compatibility. Some Makefiles may be using this.
-    DATADIRNAME=share
-    AC_SUBST(DATADIRNAME)
-
-    dnl For backward compatibility. Some Makefiles may be using this.
-    INSTOBJEXT=.mo
-    AC_SUBST(INSTOBJEXT)
-
-    dnl For backward compatibility. Some Makefiles may be using this.
-    GENCAT=gencat
-    AC_SUBST(GENCAT)
-  ])
-
-dnl Usage: Just like AM_WITH_NLS, which see.
-AC_DEFUN([AM_GNU_GETTEXT],
-  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-   AC_REQUIRE([AC_PROG_CC])dnl
-   AC_REQUIRE([AC_CANONICAL_HOST])dnl
-   AC_REQUIRE([AC_PROG_RANLIB])dnl
-   AC_REQUIRE([AC_ISC_POSIX])dnl
-   AC_REQUIRE([AC_HEADER_STDC])dnl
-   AC_REQUIRE([AC_C_CONST])dnl
-   AC_REQUIRE([AC_C_INLINE])dnl
-   AC_REQUIRE([AC_TYPE_OFF_T])dnl
-   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
-   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
-   AC_REQUIRE([AC_FUNC_MMAP])dnl
-   AC_REQUIRE([jm_GLIBC21])dnl
-
-   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
-stdlib.h string.h unistd.h sys/param.h])
-   AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getcwd getegid geteuid \
-getgid getuid mempcpy munmap putenv setenv setlocale stpcpy strchr strcasecmp \
-strdup strtoul tsearch __argz_count __argz_stringify __argz_next])
-
-   AM_ICONV
-   AM_LANGINFO_CODESET
-   AM_LC_MESSAGES
-   AM_WITH_NLS([$1],[$2],[$3])
-
-   if test "x$CATOBJEXT" != "x"; then
-     if test "x$ALL_LINGUAS" = "x"; then
-       LINGUAS=
-     else
-       AC_MSG_CHECKING(for catalogs to be installed)
-       NEW_LINGUAS=
-       for presentlang in $ALL_LINGUAS; do
-         useit=no
-         for desiredlang in ${LINGUAS-$ALL_LINGUAS}; do
-           # Use the presentlang catalog if desiredlang is
-           #   a. equal to presentlang, or
-           #   b. a variant of presentlang (because in this case,
-           #      presentlang can be used as a fallback for messages
-           #      which are not translated in the desiredlang catalog).
-           case "$desiredlang" in
-             "$presentlang"*) useit=yes;;
-           esac
-         done
-         if test $useit = yes; then
-           NEW_LINGUAS="$NEW_LINGUAS $presentlang"
-         fi
-       done
-       LINGUAS=$NEW_LINGUAS
-       AC_MSG_RESULT($LINGUAS)
-     fi
-
-     dnl Construct list of names of catalog files to be constructed.
-     if test -n "$LINGUAS"; then
-       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
-     fi
-   fi
-
-   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
-   dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
-   dnl Try to locate is.
-   MKINSTALLDIRS=
-   if test -n "$ac_aux_dir"; then
-     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
-   fi
-   if test -z "$MKINSTALLDIRS"; then
-     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
-   fi
-   AC_SUBST(MKINSTALLDIRS)
-
-   dnl Enable libtool support if the surrounding package wishes it.
-   INTL_LIBTOOL_SUFFIX_PREFIX=ifelse([$1], use-libtool, [l], [])
-   AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
-  ])

m4/inttypes.m4

@@ -1,32 +0,0 @@
-#serial 6
-
-dnl From Paul Eggert.
-
-AC_PREREQ(2.52)
-
-# Define intmax_t to long or long long if <inttypes.h> doesn't define.
-
-AC_DEFUN([jm_AC_TYPE_INTMAX_T],
-[
-  AC_REQUIRE([jm_AC_TYPE_LONG_LONG])
-  AC_CHECK_TYPE(intmax_t, ,
-    [test $ac_cv_type_long_long = yes \
-       && ac_type='long long' \
-       || ac_type='long'
-     AC_DEFINE_UNQUOTED(intmax_t, $ac_type,
-       [Define to widest signed type if <inttypes.h> doesn't define.])])
-])
-
-# Define uintmax_t to unsigned long or unsigned long long
-# if <inttypes.h> doesn't define.
-
-AC_DEFUN([jm_AC_TYPE_UINTMAX_T],
-[
-  AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG])
-  AC_CHECK_TYPE(uintmax_t, ,
-    [test $ac_cv_type_unsigned_long_long = yes \
-       && ac_type='unsigned long long' \
-       || ac_type='unsigned long'
-     AC_DEFINE_UNQUOTED(uintmax_t, $ac_type,
-       [Define to widest unsigned type if <inttypes.h> doesn't define.])])
-])

m4/mbrtowc.m4

@@ -1,19 +0,0 @@
-#serial 1
-
-dnl From Paul Eggert
-
-AC_DEFUN(jm_FUNC_MBRTOWC,
-[
-  AC_MSG_CHECKING([whether mbrtowc and mbstate_t are properly declared])
-  AC_CACHE_VAL(jm_cv_func_mbrtowc,
-    [AC_TRY_LINK(
-       [#include <wchar.h>],
-       [mbstate_t state; return ! (sizeof state && mbrtowc);],
-       [jm_cv_func_mbrtowc=yes],
-       [jm_cv_func_mbrtowc=no])])
-  if test $jm_cv_func_mbrtowc = yes; then
-    AC_MSG_RESULT(yes)
-    AC_DEFINE(HAVE_MBRTOWC, 1,
-      [Define to 1 if mbrtowc and mbstate_t are properly declared.])
-  fi
-])

m4/mbstate_t.m4

@@ -1,29 +0,0 @@
-# serial 9
-
-# From Paul Eggert.
-
-# BeOS 5 has <wchar.h> but does not define mbstate_t,
-# so you can't declare an object of that type.
-# Check for this incompatibility with Standard C.
-
-# Include stdlib.h first, because otherwise this test would fail on Linux
-# (at least glibc-2.1.3) because the "_XOPEN_SOURCE 500" definition elicits
-# a syntax error in wchar.h due to the use of undefined __int32_t.
-
-AC_DEFUN([AC_MBSTATE_T],
-  [
-   AC_CHECK_HEADERS(stdlib.h)
-
-   AC_CACHE_CHECK([for mbstate_t], ac_cv_type_mbstate_t,
-    [AC_TRY_COMPILE([
-#if HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-#include <wchar.h>],
-      [mbstate_t x; return sizeof x;],
-      ac_cv_type_mbstate_t=yes,
-      ac_cv_type_mbstate_t=no)])
-   if test $ac_cv_type_mbstate_t = no; then
-     AC_DEFINE(mbstate_t, int,
-	       [Define to a type if <wchar.h> does not define.])
-   fi])

m4/prereq.m4

@@ -1,141 +0,0 @@
-#serial 21
-
-dnl These are the prerequisite macros for files in the lib/
-dnl directories of the fileutils, sh-utils, and textutils packages.
-
-AC_DEFUN([jm_PREREQ],
-[
-  jm_PREREQ_ADDEXT
-  jm_PREREQ_CANON_HOST
-  jm_PREREQ_DIRNAME
-  jm_PREREQ_ERROR
-  jm_PREREQ_EXCLUDE
-  jm_PREREQ_GETPAGESIZE
-  jm_PREREQ_HASH
-  jm_PREREQ_HUMAN
-  jm_PREREQ_MBSWIDTH
-  jm_PREREQ_MEMCHR
-  jm_PREREQ_QUOTEARG
-  jm_PREREQ_READUTMP
-  jm_PREREQ_REGEX
-  jm_PREREQ_TEMPNAME # called by mkstemp
-])
-
-AC_DEFUN([jm_PREREQ_ADDEXT],
-[
-  dnl For addext.c.
-  AC_SYS_LONG_FILE_NAMES
-  AC_CHECK_FUNCS(pathconf)
-  AC_CHECK_HEADERS(limits.h string.h unistd.h)
-])
-
-AC_DEFUN([jm_PREREQ_CANON_HOST],
-[
-  dnl Add any libraries as early as possible.
-  dnl In particular, inet_ntoa needs -lnsl at least on Solaris5.5.1,
-  dnl so we have to add -lnsl to LIBS before checking for that function.
-  AC_SEARCH_LIBS(gethostbyname, [inet nsl])
-
-  dnl These come from -lnsl on Solaris5.5.1.
-  AC_CHECK_FUNCS(gethostbyname gethostbyaddr inet_ntoa)
-
-  AC_CHECK_FUNCS(gethostbyname gethostbyaddr inet_ntoa)
-  AC_CHECK_HEADERS(unistd.h string.h netdb.h sys/socket.h \
-                   netinet/in.h arpa/inet.h)
-])
-
-AC_DEFUN([jm_PREREQ_DIRNAME],
-[
-  AC_HEADER_STDC
-  AC_CHECK_HEADERS(string.h)
-])
-
-AC_DEFUN([jm_PREREQ_EXCLUDE],
-[
-  jm_FUNC_FNMATCH
-  AC_CHECK_HEADERS(stdbool.h)
-])
-
-AC_DEFUN([jm_PREREQ_GETPAGESIZE],
-[
-  AC_CHECK_FUNCS(getpagesize)
-  AC_CHECK_HEADERS(OS.h unistd.h)
-])
-
-AC_DEFUN([jm_PREREQ_HASH],
-[
-  AC_CHECK_HEADERS(stdlib.h stdbool.h)
-  AC_REQUIRE([jm_CHECK_DECLS])
-])
-
-# If you use human.c, you need the following files:
-# inttypes.m4 ulonglong.m4
-AC_DEFUN([jm_PREREQ_HUMAN],
-[
-  AC_CHECK_HEADERS(limits.h stdlib.h string.h)
-  AC_CHECK_DECLS([getenv])
-  AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])
-])
-
-AC_DEFUN([jm_PREREQ_MEMCHR],
-[
-  AC_CHECK_HEADERS(limits.h stdlib.h bp-sym.h)
-])
-
-AC_DEFUN([jm_PREREQ_QUOTEARG],
-[
-  AC_CHECK_FUNCS(isascii iswprint)
-  jm_FUNC_MBRTOWC
-  AC_CHECK_HEADERS(limits.h stddef.h stdlib.h string.h wchar.h wctype.h)
-  AC_HEADER_STDC
-  AC_C_BACKSLASH_A
-  AC_MBSTATE_T
-  AM_C_PROTOTYPES
-])
-
-AC_DEFUN([jm_PREREQ_READUTMP],
-[
-  AC_HEADER_STDC
-  AC_CHECK_HEADERS(string.h utmp.h utmpx.h sys/param.h)
-  AC_CHECK_FUNCS(utmpname)
-  AC_CHECK_FUNCS(utmpxname)
-  AM_C_PROTOTYPES
-
-  if test $ac_cv_header_utmp_h = yes || test $ac_cv_header_utmpx_h = yes; then
-    utmp_includes="\
-$ac_includes_default
-#ifdef HAVE_UTMPX_H
-# include <utmpx.h>
-#endif
-#ifdef HAVE_UTMP_H
-# include <utmp.h>
-#endif
-"
-    AC_CHECK_MEMBERS([struct utmpx.ut_user],,,[$utmp_includes])
-    AC_CHECK_MEMBERS([struct utmp.ut_user],,,[$utmp_includes])
-    AC_CHECK_MEMBERS([struct utmpx.ut_name],,,[$utmp_includes])
-    AC_CHECK_MEMBERS([struct utmp.ut_name],,,[$utmp_includes])
-    AC_CHECK_MEMBERS([struct utmpx.ut_type],,,[$utmp_includes])
-    AC_CHECK_MEMBERS([struct utmp.ut_type],,,[$utmp_includes])
-    AC_LIBOBJ(readutmp)
-  fi
-])
-
-AC_DEFUN([jm_PREREQ_REGEX],
-[
-  dnl FIXME: Maybe provide a btowc replacement someday: solaris-2.5.1 lacks it.
-  dnl FIXME: Check for wctype and iswctype, and and add -lw if necessary
-  dnl to get them.
-  AC_CHECK_FUNCS(bzero bcopy isascii btowc)
-  AC_CHECK_HEADERS(alloca.h libintl.h wctype.h wchar.h)
-  AC_HEADER_STDC
-  AC_FUNC_ALLOCA
-])
-
-AC_DEFUN([jm_PREREQ_TEMPNAME],
-[
-  AC_HEADER_STDC
-  AC_HEADER_STAT
-  AC_CHECK_HEADERS(fcntl.h sys/time.h stdint.h unistd.h)
-  AC_CHECK_FUNCS(__secure_getenv gettimeofday)
-])

m4/strerror_r.m4

@@ -1,66 +0,0 @@
-#serial 1002
-# Experimental replacement for the function in the latest CVS autoconf.
-# If the compile-test says strerror_r doesn't work, then resort to a
-# `run'-test that works on BeOS and segfaults on DEC Unix.
-# Use with the error.c file in ../lib.
-
-undefine([AC_FUNC_STRERROR_R])
-
-# AC_FUNC_STRERROR_R
-# ------------------
-AC_DEFUN([AC_FUNC_STRERROR_R],
-[AC_CHECK_DECLS([strerror_r])
-AC_CHECK_FUNCS([strerror_r])
-if test $ac_cv_func_strerror_r = yes; then
-  AC_CHECK_HEADERS(string.h)
-  AC_CACHE_CHECK([for working strerror_r],
-                 ac_cv_func_strerror_r_works,
-   [
-    AC_TRY_COMPILE(
-     [
-#       include <stdio.h>
-#       if HAVE_STRING_H
-#        include <string.h>
-#       endif
-     ],
-     [
-       char buf[100];
-       char x = *strerror_r (0, buf, sizeof buf);
-     ],
-     ac_cv_func_strerror_r_works=yes,
-     ac_cv_func_strerror_r_works=no
-    )
-    if test $ac_cv_func_strerror_r_works = no; then
-      # strerror_r seems not to work, but now we have to choose between
-      # systems that have relatively inaccessible declarations for the
-      # function.  BeOS and DEC UNIX 4.0 fall in this category, but the
-      # former has a strerror_r that returns char*, while the latter
-      # has a strerror_r that returns `int'.
-      # This test should segfault on the DEC system.
-      AC_TRY_RUN(
-       [
-#       include <stdio.h>
-#       include <string.h>
-#       include <ctype.h>
-
-	extern char *strerror_r ();
-
-	int
-	main ()
-	{
-	  char buf[100];
-	  char x = *strerror_r (0, buf, sizeof buf);
-	  exit (!isalpha (x));
-	}
-       ],
-       ac_cv_func_strerror_r_works=yes,
-       ac_cv_func_strerror_r_works=no,
-       ac_cv_func_strerror_r_works=no)
-    fi
-  ])
-  if test $ac_cv_func_strerror_r_works = yes; then
-    AC_DEFINE(HAVE_WORKING_STRERROR_R, 1,
-      [Define to 1 if `strerror_r' returns a string.])
-  fi
-fi
-])# AC_FUNC_STRERROR_R

m4/uintmax_t.m4

@@ -1,19 +0,0 @@
-#serial 6
-
-dnl From Paul Eggert.
-
-AC_PREREQ(2.50)
-
-# Define uintmax_t to `unsigned long' or `unsigned long long'
-# if <inttypes.h> does not exist.
-
-AC_DEFUN([jm_AC_TYPE_UINTMAX_T],
-[
-  AC_CHECK_TYPE(uintmax_t, ,
-    [AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG])
-     test $ac_cv_type_unsigned_long_long = yes \
-       && ac_type='unsigned long long' \
-       || ac_type='unsigned long'
-     AC_DEFINE_UNQUOTED(uintmax_t, $ac_type,
-       [Define to the widest unsigned type if standard headers do not declare.])])
-])

m4/xstrtoimax.m4

@@ -1,41 +0,0 @@
-#serial 2
-dnl Cloned from xstrtoumax.m4.  Keep these files in sync.
-
-# autoconf tests required for use of xstrtoimax.c
-
-AC_DEFUN([jm_AC_PREREQ_XSTRTOIMAX],
-[
-  AC_REQUIRE([jm_AC_TYPE_INTMAX_T])
-  AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])
-  AC_REQUIRE([jm_AC_TYPE_LONG_LONG])
-  AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG])
-  AC_CHECK_DECLS([strtol, strtoul, strtoll, strtoimax, strtoumax])
-  AC_CHECK_HEADERS(limits.h stdlib.h inttypes.h)
-
-  AC_CACHE_CHECK([whether <inttypes.h> defines strtoimax as a macro],
-    jm_cv_func_strtoimax_macro,
-    AC_EGREP_CPP([inttypes_h_defines_strtoimax], [#include <inttypes.h>
-#ifdef strtoimax
- inttypes_h_defines_strtoimax
-#endif],
-      jm_cv_func_strtoimax_macro=yes,
-      jm_cv_func_strtoimax_macro=no))
-
-  if test "$jm_cv_func_strtoimax_macro" != yes; then
-    AC_REPLACE_FUNCS(strtoimax)
-  fi
-
-  dnl Only the replacement strtoimax invokes strtol and strtoll,
-  dnl so we need the replacements only if strtoimax does not exist.
-  case "$jm_cv_func_strtoimax_macro,$ac_cv_func_strtoimax" in
-    no,no)
-      AC_REPLACE_FUNCS(strtol)
-
-      dnl We don't need (and can't compile) the replacement strtoll
-      dnl unless the type `long long' exists.
-      if test "$ac_cv_type_long_long" = yes; then
-	AC_REPLACE_FUNCS(strtoll)
-      fi
-      ;;
-  esac
-])

m4/xstrtoumax.m4

@@ -1,40 +0,0 @@
-#serial 4
-
-# autoconf tests required for use of xstrtoumax.c
-
-AC_DEFUN([jm_AC_PREREQ_XSTRTOUMAX],
-[
-  AC_REQUIRE([jm_AC_TYPE_INTMAX_T])
-  AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])
-  AC_REQUIRE([jm_AC_TYPE_LONG_LONG])
-  AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG])
-  AC_CHECK_DECLS([strtol, strtoul, strtoull, strtoimax, strtoumax])
-  AC_CHECK_HEADERS(limits.h stdlib.h inttypes.h)
-
-  AC_CACHE_CHECK([whether <inttypes.h> defines strtoumax as a macro],
-    jm_cv_func_strtoumax_macro,
-    AC_EGREP_CPP([inttypes_h_defines_strtoumax], [#include <inttypes.h>
-#ifdef strtoumax
- inttypes_h_defines_strtoumax
-#endif],
-      jm_cv_func_strtoumax_macro=yes,
-      jm_cv_func_strtoumax_macro=no))
-
-  if test "$jm_cv_func_strtoumax_macro" != yes; then
-    AC_REPLACE_FUNCS(strtoumax)
-  fi
-
-  dnl Only the replacement strtoumax invokes strtoul and strtoull,
-  dnl so we need the replacements only if strtoumax does not exist.
-  case "$jm_cv_func_strtoumax_macro,$ac_cv_func_strtoumax" in
-    no,no)
-      AC_REPLACE_FUNCS(strtoul)
-
-      dnl We don't need (and can't compile) the replacement strtoull
-      dnl unless the type `unsigned long long' exists.
-      if test "$ac_cv_type_unsigned_long_long" = yes; then
-	AC_REPLACE_FUNCS(strtoull)
-      fi
-      ;;
-  esac
-])

po/.gitignore

@@ -0,0 +1,22 @@
+*.gmo
+*.mo
+*.po
+.reference
+LINGUAS
+Makefile
+Makefile.in
+Makefile.in.in
+Makevars
+Makevars.template
+POTFILES
+Rules-quot
+boldquot.sed
+en@boldquot.header
+en@quot.header
+insert-header.sed
+insert-header.sin
+quot.sed
+remove-potcdate.sed
+remove-potcdate.sin
+stamp-po
+tar.pot

po/Makefile.in.in

@@ -1,196 +0,0 @@
-# Makefile for program source directory in GNU NLS utilities package.
-# Copyright (C) 1995-1997, 2000, 2001 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-PACKAGE = @PACKAGE@
-VERSION = @VERSION@
-
-# These two variables depend on the location of this directory.
-subdir = po
-top_builddir = ..
-
-SHELL = /bin/sh
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-datadir = @datadir@
-localedir = $(datadir)/locale
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-mkinstalldirs = $(SHELL) `case "$(MKINSTALLDIRS)" in /*) echo "$(MKINSTALLDIRS)" ;; *) echo "$(top_builddir)/$(MKINSTALLDIRS)" ;; esac`
-
-CC = @CC@
-GMSGFMT = @GMSGFMT@
-MSGFMT = @MSGFMT@
-XGETTEXT = @XGETTEXT@
-MSGMERGE = msgmerge
-
-DEFS = @DEFS@
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-
-INCLUDES = -I.. -I$(top_srcdir)/intl
-
-COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
-
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-DISTFILES = ChangeLog Makefile.in.in POTFILES.in $(PACKAGE).pot \
-$(POFILES) $(GMOFILES)
-
-POTFILES = \
-
-CATALOGS = @CATALOGS@
-
-.SUFFIXES:
-.SUFFIXES: .c .o .po .pox .gmo .mo
-
-.c.o:
-	$(COMPILE) $<
-
-.po.pox:
-	$(MAKE) $(PACKAGE).pot
-	$(MSGMERGE) $< $(srcdir)/$(PACKAGE).pot -o $*.pox
-
-.po.mo:
-	$(MSGFMT) -o $@ $<
-
-.po.gmo:
-	file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
-	  && rm -f $$file && $(GMSGFMT) --statistics -o $$file $<
-
-
-all: all-@USE_NLS@
-
-all-yes: $(CATALOGS)
-all-no:
-
-# Note: Target 'all' must not depend on target '$(srcdir)/$(PACKAGE).pot',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-$(srcdir)/$(PACKAGE).pot: $(POTFILES) $(srcdir)/POTFILES.in
-	$(XGETTEXT) --default-domain=$(PACKAGE) --directory=$(top_srcdir) \
-	  --add-comments --keyword=_ --keyword=N_ \
-	  --files-from=$(srcdir)/POTFILES.in \
-	&& test ! -f $(PACKAGE).po \
-	   || ( rm -f $(srcdir)/$(PACKAGE).pot \
-		&& mv $(PACKAGE).po $(srcdir)/$(PACKAGE).pot )
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-@USE_NLS@
-	if test "$(PACKAGE)" = "gettext"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-	  $(INSTALL_DATA) $(srcdir)/Makefile.in.in \
-			  $(DESTDIR)$(gettextsrcdir)/Makefile.in.in; \
-	else \
-	  : ; \
-	fi
-install-data-no: all
-install-data-yes: all
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
-	  if test -r $$cat; then \
-	    $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
-	    echo "installing $$cat as $(DESTDIR)$$dir/$(PACKAGE).mo"; \
-	  else \
-	    $(INSTALL_DATA) $(srcdir)/$$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
-	    echo "installing $(srcdir)/$$cat as" \
-		 "$(DESTDIR)$$dir/$(PACKAGE).mo"; \
-	  fi; \
-	done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall:
-	catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed 's/\.gmo$$//'`; \
-	  rm -f $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(PACKAGE).mo; \
-	done
-	if test "$(PACKAGE)" = "gettext"; then \
-	  rm -f $(DESTDIR)$(gettextsrcdir)/Makefile.in.in; \
-	else \
-	  : ; \
-	fi
-
-check: all
-
-dvi info tags TAGS ID:
-
-mostlyclean:
-	rm -f core core.* *.pox $(PACKAGE).po *.new.po
-	rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
-	rm -f Makefile Makefile.in POTFILES *.mo
-
-maintainer-clean: distclean
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	rm -f $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
-	$(MAKE) update-po
-	@$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: $(DISTFILES)
-	dists="$(DISTFILES)"; \
-	for file in $$dists; do \
-	  if test -f $$file; then dir=.; else dir=$(srcdir); fi; \
-	  cp -p $$dir/$$file $(distdir); \
-	done
-
-update-po: Makefile
-	$(MAKE) $(PACKAGE).pot
-	if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; fi; \
-	cd $(srcdir); \
-	catalogs='$(GMOFILES)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed 's/\.gmo$$//'`; \
-	  echo "$$lang:"; \
-	  if $(MSGMERGE) $$lang.po $(PACKAGE).pot -o $$lang.new.po; then \
-	    mv -f $$lang.new.po $$lang.po; \
-	  else \
-	    echo "msgmerge for $$cat failed!"; \
-	    rm -f $$lang.new.po; \
-	  fi; \
-	done
-	$(MAKE) update-gmo
-
-update-gmo: Makefile $(GMOFILES)
-	@:
-
-Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
-	       $(SHELL) ./config.status
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

po/POTFILES.in

@@ -19,26 +19,27 @@
 # 02110-1301, USA.
 
 # Library files
-lib/argmatch.c
-lib/argp-help.c
-lib/argp-parse.c
-lib/closeout.c
-lib/error.c
-lib/getopt.c
-lib/obstack.c
-lib/human.c
-lib/obstack.c
-lib/openat-die.c
+gnu/argmatch.c
+gnu/argp-help.c
+gnu/argp-parse.c
+gnu/closeout.c
+gnu/error.c
+gnu/getopt.c
+gnu/obstack.c
+gnu/human.c
+gnu/obstack.c
+gnu/openat-die.c
+gnu/quotearg.c
+gnu/rpmatch.c
+gnu/xalloc-die.c
+gnu/xmalloc.c
+gnu/version-etc.c
+gnu/xalloc-die.c
+
 lib/paxerror.c
 lib/paxexit.c
 lib/paxnames.c
-lib/quotearg.c
-lib/rpmatch.c
 lib/rtapelib.c
-lib/xalloc-die.c
-lib/xmalloc.c
-lib/version-etc.c
-lib/xalloc-die.c
 
 rmt/rmt.c
 

scripts/.cvsignore

@@ -1,6 +0,0 @@
-Makefile.in
-Makefile
-backup.sh
-backup
-restore
-dump-remind

src/.cvsignore

@@ -1,6 +0,0 @@
-.deps
-.gdbinit
-Makefile
-Makefile.in
-rmt
-tar

src/.gitignore

@@ -0,0 +1 @@
+tar

src/Makefile.am

@@ -1,7 +1,7 @@
 # Makefile for GNU tar sources.
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2003, 2006,
-# 2007 Free Software Foundation, Inc.
+# 2007, 2009 Free Software Foundation, Inc.
 
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -41,8 +41,8 @@ tar_SOURCES = \
  update.c\
  utf8.c
 
-INCLUDES = -I$(top_srcdir)/lib -I../ -I../lib
+INCLUDES = -I$(top_srcdir)/gnu -I../ -I../gnu -I$(top_srcdir)/lib
 
-LDADD = ../lib/libtar.a $(LIBINTL) $(LIBICONV)
+LDADD = ../lib/libtar.a ../gnu/libgnu.a $(LIBINTL) $(LIBICONV)
 
 tar_LDADD = $(LDADD) $(LIB_CLOCK_GETTIME)

src/Makefile.in

@@ -1,201 +1,973 @@
-# Un*x Makefile for GNU tar program.
-# Copyright (C) 1991, 1992, 1993 Free Software Foundation, Inc.
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# @configure_input@
 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+@SET_MAKE@
 
-#### Start of system configuration section. ####
+# Makefile for GNU tar sources.
 
-srcdir = @srcdir@
-VPATH = @srcdir@
+# Copyright (C) 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2003, 2006,
+# 2007, 2009 Free Software Foundation, Inc.
 
-# If you use gcc, you should either run the fixincludes script that
-# comes with it or else use gcc with the -traditional option.  Otherwise
-# ioctl calls will be compiled incorrectly on some systems.
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = tar$(EXEEXT)
+subdir = src
+DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in ansi2knr.1 ansi2knr.c
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
+	$(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/argmatch.m4 \
+	$(top_srcdir)/m4/argp.m4 $(top_srcdir)/m4/backupfile.m4 \
+	$(top_srcdir)/m4/bison.m4 $(top_srcdir)/m4/btowc.m4 \
+	$(top_srcdir)/m4/canonicalize-lgpl.m4 \
+	$(top_srcdir)/m4/chdir-long.m4 $(top_srcdir)/m4/chown.m4 \
+	$(top_srcdir)/m4/clock_time.m4 \
+	$(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/close.m4 \
+	$(top_srcdir)/m4/closeout.m4 $(top_srcdir)/m4/codeset.m4 \
+	$(top_srcdir)/m4/d-ino.m4 $(top_srcdir)/m4/dirent_h.m4 \
+	$(top_srcdir)/m4/dirfd.m4 $(top_srcdir)/m4/dirname.m4 \
+	$(top_srcdir)/m4/dos.m4 $(top_srcdir)/m4/double-slash-root.m4 \
+	$(top_srcdir)/m4/dup2.m4 $(top_srcdir)/m4/eealloc.m4 \
+	$(top_srcdir)/m4/environ.m4 $(top_srcdir)/m4/errno_h.m4 \
+	$(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exclude.m4 \
+	$(top_srcdir)/m4/exitfail.m4 $(top_srcdir)/m4/extensions.m4 \
+	$(top_srcdir)/m4/fchdir.m4 $(top_srcdir)/m4/fclose.m4 \
+	$(top_srcdir)/m4/fcntl-safer.m4 $(top_srcdir)/m4/fcntl_h.m4 \
+	$(top_srcdir)/m4/fileblocks.m4 $(top_srcdir)/m4/float_h.m4 \
+	$(top_srcdir)/m4/fnmatch.m4 $(top_srcdir)/m4/fpending.m4 \
+	$(top_srcdir)/m4/fseeko.m4 $(top_srcdir)/m4/ftruncate.m4 \
+	$(top_srcdir)/m4/getcwd-abort-bug.m4 \
+	$(top_srcdir)/m4/getcwd-path-max.m4 $(top_srcdir)/m4/getcwd.m4 \
+	$(top_srcdir)/m4/getdate.m4 $(top_srcdir)/m4/getdelim.m4 \
+	$(top_srcdir)/m4/getline.m4 $(top_srcdir)/m4/getopt.m4 \
+	$(top_srcdir)/m4/getpagesize.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/gettime.m4 $(top_srcdir)/m4/gettimeofday.m4 \
+	$(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/gnulib-common.m4 \
+	$(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/hash.m4 \
+	$(top_srcdir)/m4/human.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/intmax_t.m4 \
+	$(top_srcdir)/m4/inttostr.m4 $(top_srcdir)/m4/inttypes-pri.m4 \
+	$(top_srcdir)/m4/inttypes.m4 $(top_srcdir)/m4/inttypes_h.m4 \
+	$(top_srcdir)/m4/lchown.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/locale-fr.m4 \
+	$(top_srcdir)/m4/locale-ja.m4 $(top_srcdir)/m4/locale-zh.m4 \
+	$(top_srcdir)/m4/longlong.m4 $(top_srcdir)/m4/lseek.m4 \
+	$(top_srcdir)/m4/lstat.m4 $(top_srcdir)/m4/malloc.m4 \
+	$(top_srcdir)/m4/malloca.m4 $(top_srcdir)/m4/mbchar.m4 \
+	$(top_srcdir)/m4/mbiter.m4 $(top_srcdir)/m4/mbrtowc.m4 \
+	$(top_srcdir)/m4/mbscasecmp.m4 $(top_srcdir)/m4/mbsinit.m4 \
+	$(top_srcdir)/m4/mbstate_t.m4 $(top_srcdir)/m4/mempcpy.m4 \
+	$(top_srcdir)/m4/memrchr.m4 $(top_srcdir)/m4/mkdtemp.m4 \
+	$(top_srcdir)/m4/mktime.m4 $(top_srcdir)/m4/modechange.m4 \
+	$(top_srcdir)/m4/multiarch.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/open.m4 $(top_srcdir)/m4/openat.m4 \
+	$(top_srcdir)/m4/pathmax.m4 $(top_srcdir)/m4/paxutils.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/printf.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quote.m4 \
+	$(top_srcdir)/m4/quotearg.m4 $(top_srcdir)/m4/rawmemchr.m4 \
+	$(top_srcdir)/m4/readlink.m4 $(top_srcdir)/m4/realloc.m4 \
+	$(top_srcdir)/m4/regex.m4 $(top_srcdir)/m4/rmt.m4 \
+	$(top_srcdir)/m4/rpmatch.m4 $(top_srcdir)/m4/rtapelib.m4 \
+	$(top_srcdir)/m4/safe-read.m4 $(top_srcdir)/m4/safe-write.m4 \
+	$(top_srcdir)/m4/save-cwd.m4 $(top_srcdir)/m4/savedir.m4 \
+	$(top_srcdir)/m4/setenv.m4 $(top_srcdir)/m4/size_max.m4 \
+	$(top_srcdir)/m4/sleep.m4 $(top_srcdir)/m4/snprintf.m4 \
+	$(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stat-time.m4 \
+	$(top_srcdir)/m4/stdarg.m4 $(top_srcdir)/m4/stdbool.m4 \
+	$(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/stdint_h.m4 \
+	$(top_srcdir)/m4/stdio_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
+	$(top_srcdir)/m4/stpcpy.m4 $(top_srcdir)/m4/strcase.m4 \
+	$(top_srcdir)/m4/strchrnul.m4 $(top_srcdir)/m4/strdup.m4 \
+	$(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
+	$(top_srcdir)/m4/strings_h.m4 $(top_srcdir)/m4/strndup.m4 \
+	$(top_srcdir)/m4/strnlen.m4 $(top_srcdir)/m4/strtoimax.m4 \
+	$(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/strtoll.m4 \
+	$(top_srcdir)/m4/strtoul.m4 $(top_srcdir)/m4/strtoull.m4 \
+	$(top_srcdir)/m4/strtoumax.m4 $(top_srcdir)/m4/sys_stat_h.m4 \
+	$(top_srcdir)/m4/sys_time_h.m4 $(top_srcdir)/m4/sysexits.m4 \
+	$(top_srcdir)/m4/system.m4 $(top_srcdir)/m4/tempname.m4 \
+	$(top_srcdir)/m4/time_h.m4 $(top_srcdir)/m4/time_r.m4 \
+	$(top_srcdir)/m4/timespec.m4 $(top_srcdir)/m4/tm_gmtoff.m4 \
+	$(top_srcdir)/m4/unistd-safer.m4 $(top_srcdir)/m4/unistd_h.m4 \
+	$(top_srcdir)/m4/unlinkdir.m4 $(top_srcdir)/m4/unlocked-io.m4 \
+	$(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/m4/utime.m4 \
+	$(top_srcdir)/m4/utimens.m4 $(top_srcdir)/m4/utimes-null.m4 \
+	$(top_srcdir)/m4/utimes.m4 $(top_srcdir)/m4/vasnprintf.m4 \
+	$(top_srcdir)/m4/vsnprintf.m4 $(top_srcdir)/m4/wchar.m4 \
+	$(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wcrtomb.m4 \
+	$(top_srcdir)/m4/wctype.m4 $(top_srcdir)/m4/wcwidth.m4 \
+	$(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/write.m4 \
+	$(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/xgetcwd.m4 \
+	$(top_srcdir)/m4/xsize.m4 $(top_srcdir)/m4/xstrndup.m4 \
+	$(top_srcdir)/m4/xstrtol.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+PROGRAMS = $(bin_PROGRAMS)
+am_tar_OBJECTS = buffer.$(OBJEXT) checkpoint.$(OBJEXT) \
+	compare.$(OBJEXT) create.$(OBJEXT) delete.$(OBJEXT) \
+	extract.$(OBJEXT) xheader.$(OBJEXT) incremen.$(OBJEXT) \
+	list.$(OBJEXT) misc.$(OBJEXT) names.$(OBJEXT) sparse.$(OBJEXT) \
+	suffix.$(OBJEXT) system.$(OBJEXT) tar.$(OBJEXT) \
+	transform.$(OBJEXT) update.$(OBJEXT) utf8.$(OBJEXT)
+tar_OBJECTS = $(am_tar_OBJECTS)
+am__DEPENDENCIES_1 =
+am__DEPENDENCIES_2 = ../lib/libtar.a ../gnu/libgnu.a \
+	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
+tar_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(tar_SOURCES)
+DIST_SOURCES = $(tar_SOURCES)
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+ALLOCA_H = @ALLOCA_H@
+AMTAR = @AMTAR@
+APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BACKUP_LIBEXEC_SCRIPTS = @BACKUP_LIBEXEC_SCRIPTS@
+BACKUP_SBIN_SCRIPTS = @BACKUP_SBIN_SCRIPTS@
+BACKUP_SED_COND = @BACKUP_SED_COND@
+BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
+BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
+BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
+BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
+BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
 CC = @CC@
-YACC = @YACC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFAULT_ARCHIVE = @DEFAULT_ARCHIVE@
+DEFAULT_ARCHIVE_FORMAT = @DEFAULT_ARCHIVE_FORMAT@
+DEFAULT_BLOCKING = @DEFAULT_BLOCKING@
+DEFAULT_QUOTING_STYLE = @DEFAULT_QUOTING_STYLE@
+DEFAULT_RMT_COMMAND = @DEFAULT_RMT_COMMAND@
+DEFAULT_RMT_DIR = @DEFAULT_RMT_DIR@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DIRENT_H = @DIRENT_H@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
+EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
+ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
+ENOLINK_VALUE = @ENOLINK_VALUE@
+EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
+EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
+ERRNO_H = @ERRNO_H@
+EXEEXT = @EXEEXT@
+FCNTL_H = @FCNTL_H@
+FLOAT_H = @FLOAT_H@
+FNMATCH_H = @FNMATCH_H@
+GETOPT_H = @GETOPT_H@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLIBC21 = @GLIBC21@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GNULIB_ALPHASORT = @GNULIB_ALPHASORT@
+GNULIB_ATOLL = @GNULIB_ATOLL@
+GNULIB_BTOWC = @GNULIB_BTOWC@
+GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
+GNULIB_CHOWN = @GNULIB_CHOWN@
+GNULIB_CLOSE = @GNULIB_CLOSE@
+GNULIB_DIRFD = @GNULIB_DIRFD@
+GNULIB_DPRINTF = @GNULIB_DPRINTF@
+GNULIB_DUP2 = @GNULIB_DUP2@
+GNULIB_ENVIRON = @GNULIB_ENVIRON@
+GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
+GNULIB_FCHDIR = @GNULIB_FCHDIR@
+GNULIB_FCLOSE = @GNULIB_FCLOSE@
+GNULIB_FFLUSH = @GNULIB_FFLUSH@
+GNULIB_FOPEN = @GNULIB_FOPEN@
+GNULIB_FPRINTF = @GNULIB_FPRINTF@
+GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
+GNULIB_FPUTC = @GNULIB_FPUTC@
+GNULIB_FPUTS = @GNULIB_FPUTS@
+GNULIB_FREOPEN = @GNULIB_FREOPEN@
+GNULIB_FSEEK = @GNULIB_FSEEK@
+GNULIB_FSEEKO = @GNULIB_FSEEKO@
+GNULIB_FSYNC = @GNULIB_FSYNC@
+GNULIB_FTELL = @GNULIB_FTELL@
+GNULIB_FTELLO = @GNULIB_FTELLO@
+GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
+GNULIB_FWRITE = @GNULIB_FWRITE@
+GNULIB_GETCWD = @GNULIB_GETCWD@
+GNULIB_GETDELIM = @GNULIB_GETDELIM@
+GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
+GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
+GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
+GNULIB_GETLINE = @GNULIB_GETLINE@
+GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
+GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
+GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
+GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
+GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
+GNULIB_IMAXABS = @GNULIB_IMAXABS@
+GNULIB_IMAXDIV = @GNULIB_IMAXDIV@
+GNULIB_LCHMOD = @GNULIB_LCHMOD@
+GNULIB_LCHOWN = @GNULIB_LCHOWN@
+GNULIB_LINK = @GNULIB_LINK@
+GNULIB_LSEEK = @GNULIB_LSEEK@
+GNULIB_LSTAT = @GNULIB_LSTAT@
+GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
+GNULIB_MBRLEN = @GNULIB_MBRLEN@
+GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
+GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
+GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
+GNULIB_MBSCHR = @GNULIB_MBSCHR@
+GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
+GNULIB_MBSINIT = @GNULIB_MBSINIT@
+GNULIB_MBSLEN = @GNULIB_MBSLEN@
+GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
+GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
+GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
+GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
+GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
+GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
+GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
+GNULIB_MBSSEP = @GNULIB_MBSSEP@
+GNULIB_MBSSPN = @GNULIB_MBSSPN@
+GNULIB_MBSSTR = @GNULIB_MBSSTR@
+GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
+GNULIB_MEMMEM = @GNULIB_MEMMEM@
+GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
+GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
+GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
+GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
+GNULIB_OBSTACK_PRINTF = @GNULIB_OBSTACK_PRINTF@
+GNULIB_OBSTACK_PRINTF_POSIX = @GNULIB_OBSTACK_PRINTF_POSIX@
+GNULIB_OPEN = @GNULIB_OPEN@
+GNULIB_PERROR = @GNULIB_PERROR@
+GNULIB_PRINTF = @GNULIB_PRINTF@
+GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
+GNULIB_PUTC = @GNULIB_PUTC@
+GNULIB_PUTCHAR = @GNULIB_PUTCHAR@
+GNULIB_PUTENV = @GNULIB_PUTENV@
+GNULIB_PUTS = @GNULIB_PUTS@
+GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
+GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
+GNULIB_READLINK = @GNULIB_READLINK@
+GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
+GNULIB_RPMATCH = @GNULIB_RPMATCH@
+GNULIB_SCANDIR = @GNULIB_SCANDIR@
+GNULIB_SETENV = @GNULIB_SETENV@
+GNULIB_SLEEP = @GNULIB_SLEEP@
+GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
+GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
+GNULIB_STDIO_H_SIGPIPE = @GNULIB_STDIO_H_SIGPIPE@
+GNULIB_STPCPY = @GNULIB_STPCPY@
+GNULIB_STPNCPY = @GNULIB_STPNCPY@
+GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
+GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
+GNULIB_STRDUP = @GNULIB_STRDUP@
+GNULIB_STRERROR = @GNULIB_STRERROR@
+GNULIB_STRNDUP = @GNULIB_STRNDUP@
+GNULIB_STRNLEN = @GNULIB_STRNLEN@
+GNULIB_STRPBRK = @GNULIB_STRPBRK@
+GNULIB_STRSEP = @GNULIB_STRSEP@
+GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
+GNULIB_STRSTR = @GNULIB_STRSTR@
+GNULIB_STRTOD = @GNULIB_STRTOD@
+GNULIB_STRTOIMAX = @GNULIB_STRTOIMAX@
+GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
+GNULIB_STRTOLL = @GNULIB_STRTOLL@
+GNULIB_STRTOULL = @GNULIB_STRTOULL@
+GNULIB_STRTOUMAX = @GNULIB_STRTOUMAX@
+GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
+GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
+GNULIB_UNSETENV = @GNULIB_UNSETENV@
+GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
+GNULIB_VDPRINTF = @GNULIB_VDPRINTF@
+GNULIB_VFPRINTF = @GNULIB_VFPRINTF@
+GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
+GNULIB_VPRINTF = @GNULIB_VPRINTF@
+GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
+GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
+GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
+GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
+GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
+GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
+GNULIB_WCTOB = @GNULIB_WCTOB@
+GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
+GNULIB_WRITE = @GNULIB_WRITE@
+GREP = @GREP@
+HAVE_ALPHASORT = @HAVE_ALPHASORT@
+HAVE_ATOLL = @HAVE_ATOLL@
+HAVE_BTOWC = @HAVE_BTOWC@
+HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
+HAVE_DECL_DIRFD = @HAVE_DECL_DIRFD@
+HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
+HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
+HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
+HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
+HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
+HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@
+HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@
+HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
+HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
+HAVE_DECL_OBSTACK_PRINTF = @HAVE_DECL_OBSTACK_PRINTF@
+HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
+HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
+HAVE_DECL_STRERROR = @HAVE_DECL_STRERROR@
+HAVE_DECL_STRNCASECMP = @HAVE_DECL_STRNCASECMP@
+HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
+HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
+HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
+HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@
+HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
+HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@
+HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
+HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
+HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
+HAVE_DPRINTF = @HAVE_DPRINTF@
+HAVE_DUP2 = @HAVE_DUP2@
+HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
+HAVE_FSEEKO = @HAVE_FSEEKO@
+HAVE_FSYNC = @HAVE_FSYNC@
+HAVE_FTELLO = @HAVE_FTELLO@
+HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
+HAVE_GETDOMAINNAME = @HAVE_GETDOMAINNAME@
+HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
+HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
+HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
+HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
+HAVE_GETUSERSHELL = @HAVE_GETUSERSHELL@
+HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
+HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
+HAVE_LCHMOD = @HAVE_LCHMOD@
+HAVE_LINK = @HAVE_LINK@
+HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
+HAVE_LSTAT = @HAVE_LSTAT@
+HAVE_MALLOC_POSIX = @HAVE_MALLOC_POSIX@
+HAVE_MBRLEN = @HAVE_MBRLEN@
+HAVE_MBRTOWC = @HAVE_MBRTOWC@
+HAVE_MBSINIT = @HAVE_MBSINIT@
+HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
+HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
+HAVE_MEMPCPY = @HAVE_MEMPCPY@
+HAVE_MKDTEMP = @HAVE_MKDTEMP@
+HAVE_OS_H = @HAVE_OS_H@
+HAVE_RANDOM_H = @HAVE_RANDOM_H@
+HAVE_RANDOM_R = @HAVE_RANDOM_R@
+HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
+HAVE_READLINK = @HAVE_READLINK@
+HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
+HAVE_RPMATCH = @HAVE_RPMATCH@
+HAVE_SCANDIR = @HAVE_SCANDIR@
+HAVE_SETENV = @HAVE_SETENV@
+HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
+HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
+HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
+HAVE_SLEEP = @HAVE_SLEEP@
+HAVE_STDINT_H = @HAVE_STDINT_H@
+HAVE_STPCPY = @HAVE_STPCPY@
+HAVE_STPNCPY = @HAVE_STPNCPY@
+HAVE_STRCASECMP = @HAVE_STRCASECMP@
+HAVE_STRCASESTR = @HAVE_STRCASESTR@
+HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
+HAVE_STRNDUP = @HAVE_STRNDUP@
+HAVE_STRPBRK = @HAVE_STRPBRK@
+HAVE_STRSEP = @HAVE_STRSEP@
+HAVE_STRTOD = @HAVE_STRTOD@
+HAVE_STRTOLL = @HAVE_STRTOLL@
+HAVE_STRTOULL = @HAVE_STRTOULL@
+HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
+HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
+HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
+HAVE_SYSEXITS_H = @HAVE_SYSEXITS_H@
+HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
+HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
+HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
+HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
+HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
+HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
+HAVE_UNISTD_H = @HAVE_UNISTD_H@
+HAVE_UNSETENV = @HAVE_UNSETENV@
+HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
+HAVE_VASPRINTF = @HAVE_VASPRINTF@
+HAVE_VDPRINTF = @HAVE_VDPRINTF@
+HAVE_WCHAR_H = @HAVE_WCHAR_H@
+HAVE_WCRTOMB = @HAVE_WCRTOMB@
+HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
+HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
+HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
+HAVE_WINT_T = @HAVE_WINT_T@
+HAVE__BOOL = @HAVE__BOOL@
+INCLUDE_NEXT = @INCLUDE_NEXT@
+INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
-
-# Things you might add to DEFS:
-# -DSTDC_HEADERS	If you have ANSI C headers and libraries.
-# -DHAVE_UNISTD_H	If you have unistd.h.
-# -DHAVE_STRING_H	If you don't have ANSI C headers but have string.h.
-# -DHAVE_LIMITS_H	If you have limits.h.
-# -DBSD42		If you have sys/dir.h (unless you use -DPOSIX),
-#			sys/file.h, and st_blocks in `struct stat'.
-# -DDIRENT		If you have dirent.h.
-# -DSYSNDIR		Old Xenix systems (sys/ndir.h).
-# -DSYSDIR		Old BSD systems (sys/dir.h).
-# -DNDIR		Old System V systems (ndir.h).
-# -DMAJOR_IN_MKDEV	If major, minor, makedev defined in sys/mkdev.h.
-# -DMAJOR_IN_SYSMACROS	If major, minor, makedev defined in sys/sysmacros.h.
-# -DRETSIGTYPE=int	If your signal handlers return int, not void.
-# -DHAVE_SYS_MTIO_H	If you have sys/mtio.h (magtape ioctls).
-# -DHAVE_SYS_GENTAPE_H	If you have sys/gentape.h (ISC magtape ioctls).
-# -DHAVE_NETDB_H	To use rexec for remote tape operations
-#			instead of forking rsh or remsh.
-# -DNO_REMOTE		If you have neither a remote shell nor rexec.
-# -DHAVE_VPRINTF	If you have vprintf function.
-# -DHAVE_DOPRNT		If you have _doprnt function (but lack vprintf).
-# -DHAVE_FTIME		If you have ftime system call.
-# -DHAVE_STRSTR		If you have strstr function.
-# -DHAVE_VALLOC		If you have valloc function.
-# -DHAVE_MKDIR		If you have mkdir and rmdir system calls.
-# -DHAVE_MKNOD		If you have mknod system call.
-# -DHAVE_RENAME 	If you have rename system call.
-# -DHAVE_GETCWD		If not POSIX.1 but have getcwd function.
-# -DHAVE_FTRUNCATE	If you have ftruncate system call.
-# -DV7			On Version 7 Unix (not tested in a long time).
-# -DEMUL_OPEN3		If you lack a 3-argument version of open, and want
-#			to emulate it with system calls you do have.
-# -DNO_OPEN3		If you lack the 3-argument open and want to
-#			disable the tar -k option instead of emulating open.
-# -DXENIX		If you have sys/inode.h and need it to be included.
-
-DEF_AR_FILE = @DEF_AR_FILE@
-DEFBLOCKING = 20
-DEFS = @DEFS@ -DDEF_AR_FILE=\"$(DEF_AR_FILE)\" -DDEFBLOCKING=$(DEFBLOCKING)
-
-# Set this to rtapelib.o unless you defined NO_REMOTE, in which case
-# make it empty.
-RTAPELIB = @RTAPELIB@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INT32_MAX_LT_INTMAX_MAX = @INT32_MAX_LT_INTMAX_MAX@
+INT64_MAX_EQ_LONG_MAX = @INT64_MAX_EQ_LONG_MAX@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+INTTYPES_H = @INTTYPES_H@
+LDFLAGS = @LDFLAGS@
+LIBGNU_LIBDEPS = @LIBGNU_LIBDEPS@
+LIBGNU_LTLIBDEPS = @LIBGNU_LTLIBDEPS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIB_CLOCK_GETTIME = @LIB_CLOCK_GETTIME@
+LIB_CLOSE = @LIB_CLOSE@
+LIB_SETSOCKOPT = @LIB_SETSOCKOPT@
+LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
+LOCALE_FR = @LOCALE_FR@
+LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
+LOCALE_JA = @LOCALE_JA@
+LOCALE_ZH_CN = @LOCALE_ZH_CN@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEXT_DIRENT_H = @NEXT_DIRENT_H@
+NEXT_ERRNO_H = @NEXT_ERRNO_H@
+NEXT_FCNTL_H = @NEXT_FCNTL_H@
+NEXT_FLOAT_H = @NEXT_FLOAT_H@
+NEXT_INTTYPES_H = @NEXT_INTTYPES_H@
+NEXT_STDARG_H = @NEXT_STDARG_H@
+NEXT_STDINT_H = @NEXT_STDINT_H@
+NEXT_STDIO_H = @NEXT_STDIO_H@
+NEXT_STDLIB_H = @NEXT_STDLIB_H@
+NEXT_STRINGS_H = @NEXT_STRINGS_H@
+NEXT_STRING_H = @NEXT_STRING_H@
+NEXT_SYSEXITS_H = @NEXT_SYSEXITS_H@
+NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
+NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
+NEXT_TIME_H = @NEXT_TIME_H@
+NEXT_UNISTD_H = @NEXT_UNISTD_H@
+NEXT_WCHAR_H = @NEXT_WCHAR_H@
+NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
+PRIPTR_PREFIX = @PRIPTR_PREFIX@
+PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@
+PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
+PU_RMT_PROG = @PU_RMT_PROG@
+RANLIB = @RANLIB@
+REPLACE_BTOWC = @REPLACE_BTOWC@
+REPLACE_CHOWN = @REPLACE_CHOWN@
+REPLACE_CLOSE = @REPLACE_CLOSE@
+REPLACE_DPRINTF = @REPLACE_DPRINTF@
+REPLACE_FCHDIR = @REPLACE_FCHDIR@
+REPLACE_FCLOSE = @REPLACE_FCLOSE@
+REPLACE_FFLUSH = @REPLACE_FFLUSH@
+REPLACE_FOPEN = @REPLACE_FOPEN@
+REPLACE_FPRINTF = @REPLACE_FPRINTF@
+REPLACE_FREOPEN = @REPLACE_FREOPEN@
+REPLACE_FSEEK = @REPLACE_FSEEK@
+REPLACE_FSEEKO = @REPLACE_FSEEKO@
+REPLACE_FTELL = @REPLACE_FTELL@
+REPLACE_FTELLO = @REPLACE_FTELLO@
+REPLACE_GETCWD = @REPLACE_GETCWD@
+REPLACE_GETLINE = @REPLACE_GETLINE@
+REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
+REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
+REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
+REPLACE_LCHOWN = @REPLACE_LCHOWN@
+REPLACE_LOCALTIME_R = @REPLACE_LOCALTIME_R@
+REPLACE_LSEEK = @REPLACE_LSEEK@
+REPLACE_LSTAT = @REPLACE_LSTAT@
+REPLACE_MBRLEN = @REPLACE_MBRLEN@
+REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
+REPLACE_MBSINIT = @REPLACE_MBSINIT@
+REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
+REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
+REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
+REPLACE_MEMMEM = @REPLACE_MEMMEM@
+REPLACE_MKDIR = @REPLACE_MKDIR@
+REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
+REPLACE_NANOSLEEP = @REPLACE_NANOSLEEP@
+REPLACE_OBSTACK_PRINTF = @REPLACE_OBSTACK_PRINTF@
+REPLACE_OPEN = @REPLACE_OPEN@
+REPLACE_PERROR = @REPLACE_PERROR@
+REPLACE_PRINTF = @REPLACE_PRINTF@
+REPLACE_PUTENV = @REPLACE_PUTENV@
+REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
+REPLACE_SPRINTF = @REPLACE_SPRINTF@
+REPLACE_STDIO_WRITE_FUNCS = @REPLACE_STDIO_WRITE_FUNCS@
+REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
+REPLACE_STRDUP = @REPLACE_STRDUP@
+REPLACE_STRERROR = @REPLACE_STRERROR@
+REPLACE_STRPTIME = @REPLACE_STRPTIME@
+REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
+REPLACE_STRSTR = @REPLACE_STRSTR@
+REPLACE_STRTOD = @REPLACE_STRTOD@
+REPLACE_TIMEGM = @REPLACE_TIMEGM@
+REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
+REPLACE_VDPRINTF = @REPLACE_VDPRINTF@
+REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
+REPLACE_VPRINTF = @REPLACE_VPRINTF@
+REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
+REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
+REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
+REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
+REPLACE_WCTOB = @REPLACE_WCTOB@
+REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
+REPLACE_WRITE = @REPLACE_WRITE@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
+SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
+STDARG_H = @STDARG_H@
+STDBOOL_H = @STDBOOL_H@
+STDINT_H = @STDINT_H@
+STRIP = @STRIP@
+SYSEXITS_H = @SYSEXITS_H@
+SYS_STAT_H = @SYS_STAT_H@
+SYS_TIME_H = @SYS_TIME_H@
+SYS_TIME_H_DEFINES_STRUCT_TIMESPEC = @SYS_TIME_H_DEFINES_STRUCT_TIMESPEC@
+TIME_H_DEFINES_STRUCT_TIMESPEC = @TIME_H_DEFINES_STRUCT_TIMESPEC@
+UINT32_MAX_LT_UINTMAX_MAX = @UINT32_MAX_LT_UINTMAX_MAX@
+UINT64_MAX_EQ_ULONG_MAX = @UINT64_MAX_EQ_ULONG_MAX@
+UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+VOID_UNSETENV = @VOID_UNSETENV@
+WCHAR_H = @WCHAR_H@
+WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
+WCTYPE_H = @WCTYPE_H@
+WINT_T_SUFFIX = @WINT_T_SUFFIX@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+gl_LIBOBJS = @gl_LIBOBJS@
+gl_LTLIBOBJS = @gl_LTLIBOBJS@
+gltests_LIBOBJS = @gltests_LIBOBJS@
+gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+noinst_HEADERS = arith.h common.h tar.h
+tar_SOURCES = \
+ buffer.c\
+ checkpoint.c\
+ compare.c\
+ create.c\
+ delete.c\
+ extract.c\
+ xheader.c\
+ incremen.c\
+ list.c\
+ misc.c\
+ names.c\
+ sparse.c\
+ suffix.c\
+ system.c\
+ tar.c\
+ transform.c\
+ update.c\
+ utf8.c
+
+INCLUDES = -I$(top_srcdir)/gnu -I../ -I../gnu -I$(top_srcdir)/lib
+LDADD = ../lib/libtar.a ../gnu/libgnu.a $(LIBINTL) $(LIBICONV)
+tar_LDADD = $(LDADD) $(LIB_CLOCK_GETTIME)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits  src/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnits  src/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	  ; then \
+	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+	   $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
+	done
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+installcheck-binPROGRAMS: $(bin_PROGRAMS)
+	bad=0; pid=$$$$; list="$(bin_PROGRAMS)"; for p in $$list; do \
+	  case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \
+	   *" $$p "* | *" $(srcdir)/$$p "*) continue;; \
+	  esac; \
+	  f=`echo "$$p" | \
+	     sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  for opt in --help --version; do \
+	    if "$(DESTDIR)$(bindir)/$$f" $$opt >c$${pid}_.out \
+	         2>c$${pid}_.err </dev/null \
+		 && test -n "`cat c$${pid}_.out`" \
+		 && test -z "`cat c$${pid}_.err`"; then :; \
+	    else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \
+	  done; \
+	done; rm -f c$${pid}_.???; exit $$bad
+tar$(EXEEXT): $(tar_OBJECTS) $(tar_DEPENDENCIES) 
+	@rm -f tar$(EXEEXT)
+	$(LINK) $(tar_OBJECTS) $(tar_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/buffer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/checkpoint.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/compare.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/create.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/delete.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/extract.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/incremen.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/list.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/names.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sparse.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/suffix.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/system.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tar.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transform.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/update.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utf8.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xheader.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(HEADERS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
 
-CFLAGS = -g
-LDFLAGS = -g
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 
-prefix = /usr/local
-exec_prefix = $(prefix)
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
 
-# Prefix for each installed program, normally empty or `g'.
-binprefix = 
+clean-generic:
 
-# The directory to install tar in.
-bindir = $(exec_prefix)/bin
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
-# Where to put the rmt executable.
-libdir = $(exec_prefix)/lib
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
 
-# The directory to install the info files in.
-infodir = $(prefix)/info
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
 
-#### End of system configuration section. ####
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
 
-SHELL = /bin/sh
+dvi: dvi-am
 
-SRC1 =	tar.c create.c extract.c buffer.c getoldopt.c update.c gnu.c mangle.c
-SRC2 =  version.c list.c names.c diffarch.c port.c fnmatch.c getopt.c malloc.c
-SRC3 =  getopt1.c regex.c getdate.y getdate.c alloca.c
-SRCS =	$(SRC1) $(SRC2) $(SRC3)
-OBJ1 =	tar.o create.o extract.o buffer.o getoldopt.o update.o gnu.o mangle.o
-OBJ2 =	version.o list.o names.o diffarch.o port.o fnmatch.o getopt.o @MALLOC@
-OBJ3 =  getopt1.o regex.o getdate.o $(RTAPELIB) @ALLOCA@
-OBJS =	$(OBJ1) $(OBJ2) $(OBJ3)
-AUX =   README INSTALL NEWS COPYING ChangeLog Makefile.in makefile.pc \
-	configure configure.in mkinstalldirs \
-	tar.h fnmatch.h pathmax.h port.h open3.h getopt.h regex.h \
-	rmt.h rmt.c rtapelib.c \
-	msd_dir.h msd_dir.c tcexparg.c \
-	level-0 level-1 backup-specs dump-remind testpad.c getpagesize.h
-#	tar.texinfo tar.info* texinfo.tex
+dvi-am:
 
-all:	@PROGS@ 
-# tar.info
+html: html-am
 
-.c.o:
-	$(CC) -c $(CPPFLAGS) $(DEFS) -I. -I$(srcdir) $(CFLAGS) $<
+info: info-am
 
-tar:	$(OBJS)
-	$(CC) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
+info-am:
 
-rmt:	rmt.c
-	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(srcdir)/rmt.c $(LIBS)
+install-data-am:
 
-tar.info: tar.texinfo
-	makeinfo $(srcdir)/tar.texinfo
+install-dvi: install-dvi-am
 
-install: all installdirs
-	$(INSTALL_PROGRAM) tar $(bindir)/$(binprefix)tar
-	-test ! -f rmt || $(INSTALL_PROGRAM) rmt $(libdir)/rmt
-#	for file in $(srcdir)/tar.info*; \
-#	do $(INSTALL_DATA) $$file $(infodir)/$$file; \
-#	done
+install-exec-am: install-binPROGRAMS
 
-uninstall:
-	rm -f $(bindir)/$(binprefix)tar	$(infodir)/tar.info*
-	-rm -f $(libdir)/rmt
+install-html: install-html-am
 
-installdirs:
-	$(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(libdir) $(infodir)
+install-info: install-info-am
+
+install-man:
 
-Makefile: Makefile.in config.status
-	$(SHELL) config.status
-config.status: configure
-	$(SHELL) config.status --recheck
-configure: configure.in
-	cd $(srcdir); autoconf
+install-pdf: install-pdf-am
 
-$(OBJS): tar.h pathmax.h port.h testpad.h
-regex.o buffer.o tar.o: regex.h
-tar.o fnmatch.o: fnmatch.h
+install-ps: install-ps-am
 
-getdate.c: getdate.y
-	$(YACC) $(srcdir)/getdate.y
-	mv y.tab.c getdate.c
-# getdate.y has 8 shift/reduce conflicts.
+installcheck-am: installcheck-binPROGRAMS
 
-testpad.h: testpad
-	./testpad
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
 
-testpad: testpad.o
-	$(CC) -o $@ testpad.o
+mostlyclean: mostlyclean-am
 
-TAGS:	$(SRCS)
-	etags $(SRCS)
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
 
-clean:
-	rm -f *.o tar rmt testpad testpad.h core
+pdf: pdf-am
 
-mostlyclean: clean
+pdf-am:
 
-distclean: clean
-	rm -f Makefile config.status
+ps: ps-am
 
-realclean: distclean
-	rm -f TAGS *.info* getdate.c y.tab.c
+ps-am:
 
-shar: $(SRCS) $(AUX)
-	shar $(SRCS) $(AUX) | gzip > tar-`sed -e '/version_string/!d' -e 's/[^0-9.]*\([0-9.]*\).*/\1/' -e q version.c`.shar.z
+uninstall-am: uninstall-binPROGRAMS
 
-dist: $(SRCS) $(AUX)
-	echo tar-`sed -e '/version_string/!d' -e 's/[^0-9.]*\([0-9.]*\).*/\1/' -e q version.c` > .fname
-	-rm -rf `cat .fname`
-	mkdir `cat .fname`
-	for file in $(SRCS) $(AUX); do \
-          ln $$file `cat .fname` || cp $$file `cat .fname`; done
-	tar chzf `cat .fname`.tar.z `cat .fname`
-	-rm -rf `cat .fname` .fname
+.MAKE: install-am install-strip
 
-tar.zoo: $(SRCS) $(AUX)
-	-rm -rf tmp.dir
-	-mkdir tmp.dir
-	-rm tar.zoo
-	for X in $(SRCS) $(AUX) ; do echo $$X ; sed 's/$$/
/' $$X > tmp.dir/$$X ; done
-	cd tmp.dir ; zoo aM ../tar.zoo *
-	-rm -rf tmp.dir
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+	clean-generic ctags distclean distclean-compile \
+	distclean-generic distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installcheck-binPROGRAMS \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
+	ps ps-am tags uninstall uninstall-am uninstall-binPROGRAMS
 
-# Prevent GNU make v3 from overflowing arg limit on SysV.
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:

tests/.cvsignore → tests/.gitignore

@@ -1,17 +1,10 @@
-*.bz2
-*.gz
-*.tar
-*.gtar
-.deps
-Makefile
-Makefile.in
-argcv.c
-argcv.h
 atconfig
 atlocal
-genfile
-genfile.c
 package.m4
 testsuite
 testsuite.dir
 testsuite.log
+argcv.c
+argcv.h
+genfile.c
+genfile

tests/Makefile.am

@@ -1,7 +1,7 @@
 # Makefile for GNU tar regression tests.
 
 # Copyright (C) 1996, 1997, 1999, 2000, 2001, 2003, 2004, 2005, 
-# 2006, 2007 Free Software Foundation, Inc.
+# 2006, 2007, 2009 Free Software Foundation, Inc.
 
 # François Pinard <pinard@iro.umontreal.ca>, 1988.
 # Sergey Poznyakoff <gray@mirddin.farlep.net>, 2004.
@@ -161,6 +161,6 @@ check_PROGRAMS = genfile
 genfile_SOURCES = genfile.c argcv.c argcv.h
 
 localedir = $(datadir)/locale
-INCLUDES = -I$(top_srcdir)/lib -I../lib -I$(top_srcdir)/src
+INCLUDES = -I$(top_srcdir)/gnu -I../gnu -I$(top_srcdir)/gnu -I$(top_srcdir)/lib
 AM_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\"
-LDADD = ../lib/libtar.a $(LIBINTL) $(LIB_CLOCK_GETTIME)
+LDADD = ../gnu/libgnu.a $(LIBINTL) $(LIB_CLOCK_GETTIME)