#! /usr/bin/perl -w
# Display and edit the 'dev' field in tar's snapshots
# Copyright 2007-2023 Free Software Foundation, Inc.

# This file is part of GNU tar.

# GNU tar is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.

# GNU tar is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.


# tar-snapshot-edit
#
# This script is capable of replacing values in the 'dev' field of an
# incremental backup 'snapshot' file.  This is useful when the device
# used to store files in a tar archive changes, without the files
# themselves changing.  This may happen when, for example, a device
# driver changes major or minor numbers.
#
# It can also run a check on all the field values found in the
# snapshot file, printing out a detailed message when it finds values
# that would cause an "Unexpected field value in snapshot file",
# "Numerical result out of range", or "Invalid argument" error
# if tar were run using that snapshot file as input.  (See the
# comments included in the definition of the check_field_values
# routine for more detailed information regarding these checks.)
#
#
#
# Author: Dustin J. Mitchell <dustin@zmanda.com>
#
# Modified Aug 25, 2011 by Nathan Stratton Treadway <nathanst AT ontko.com>:
#   * update Perl syntax to work correctly with more recent versions of
#     Perl.  (The original code worked with in the v5.8 timeframe but
#     not with Perl v5.10.1 and later.)
#   * added a "-c" option to check the snapshot file for invalid field values.
#   * handle NFS indicator character ("+") in version 0 and 1 files
#   * preserve the original header/version line when editing version 1
#     or 2 files.
#   * tweak output formatting
#
# Modified March 13, 2013 by Nathan Stratton Treadway <nathanst AT ontko.com>:
#   * configure field ranges used for -c option based on the system
#     architecture (in response to the December 2012 update to GNU tar
#     enabling support for systems with signed dev_t values).
#   * when printing the list of device ids found in the snapshot file
#     (when run in the default mode), print the raw device id values
#     instead of the hex-string version in those cases where they
#     can't be converted successfully.  

use Getopt::Std;
use Config;

my %snapshot_field_ranges;               # used in check_field_values function

## reading

sub read_incr_db ($) {
    my $filename = shift;
    open(my $file, "<$filename") || die "Could not open '$filename' for reading";

    my $header_str = <$file>;
    my $file_version;
    if ($header_str =~ /^GNU tar-[^-]*-([0-9]+)\n$/) {
	$file_version = $1+0;
    } else {
	$file_version = 0;
    }

    print "\nFile: $filename\n";
    print "  Detected snapshot file version: $file_version\n\n";

    if ($file_version == 0) {
	return read_incr_db_0($file, $header_str);
    } elsif ($file_version == 1) {
	return read_incr_db_1($file, $header_str);
    } elsif ($file_version == 2) {
	return read_incr_db_2($file, $header_str);
    } else {
	die "Unrecognized snapshot version in header '$header_str'";
    }
}

sub read_incr_db_0 ($$) {
    my $file = shift;
    my $header_str = shift;

    my $hdr_timestamp_sec = $header_str;
    chop $hdr_timestamp_sec;
    my $hdr_timestamp_nsec = ''; # not present in file format 0

    my $nfs;
    my @dirs;

    while (<$file>) {
	/^(\+?)([0-9]*) ([0-9]*) (.*)\n$/ || die("Bad snapshot line $_");

	if ( $1 eq "+" ) {
	  $nfs="1";
	} else {
	  $nfs="0";
	}
	push @dirs, { nfs=>$nfs,
		      dev=>$2,
		      ino=>$3,
		      name=>$4 };
    }

    close($file);

    # file version, timestamp, timestamp, dir list, file header line
    return [ 0, $hdr_timestamp_sec, $hdr_timestamp_nsec, \@dirs, ""];
}

sub read_incr_db_1 ($$) {
    my $file = shift;
    my $header_str = shift;


    my $timestamp = <$file>; # "sec nsec"
    my ($hdr_timestamp_sec, $hdr_timestamp_nsec) = ($timestamp =~ /([0-9]*) ([0-9]*)/);

    my $nfs;
    my @dirs;

    while (<$file>) {
	/^(\+?)([0-9]*) ([0-9]*) ([0-9]*) ([0-9]*) (.*)\n$/ || die("Bad snapshot line $_");

	if ( $1 eq "+" ) {
	  $nfs="1";
	} else {
	  $nfs="0";
	}

	push @dirs, { nfs=>$nfs,
		      timestamp_sec=>$2,
		      timestamp_nsec=>$3,
		      dev=>$4,
		      ino=>$5,
		      name=>$6 };
    }

    close($file);

    # file version, timestamp, timestamp, dir list, file header line
    return [ 1, $hdr_timestamp_sec, $hdr_timestamp_nsec, \@dirs, $header_str ];
}

sub read_incr_db_2 ($$) {
    my $file = shift;
    my $header_str = shift;

    $/="\0"; # $INPUT_RECORD_SEPARATOR
    my $hdr_timestamp_sec = <$file>;
    chop $hdr_timestamp_sec;
    my $hdr_timestamp_nsec = <$file>;
    chop $hdr_timestamp_nsec;
    my @dirs;

    while (1) {
	last if eof($file);

	my $nfs = <$file>;
	my $timestamp_sec = <$file>;
	my $timestamp_nsec = <$file>;
	my $dev = <$file>;
	my $ino = <$file>;
	my $name = <$file>;

	# get rid of trailing NULs
	chop $nfs;
	chop $timestamp_sec;
	chop $timestamp_nsec;
	chop $dev;
	chop $ino;
	chop $name;

	my @dirents;
	while (my $dirent = <$file>) {
	    chop $dirent;
	    push @dirents, $dirent;
	    last if ($dirent eq "");
	}
	die "missing terminator" unless (<$file> eq "\0");

	push @dirs, { nfs=>$nfs,
		      timestamp_sec=>$timestamp_sec,
		      timestamp_nsec=>$timestamp_nsec,
		      dev=>$dev,
		      ino=>$ino,
		      name=>$name,
		      dirents=>\@dirents };
    }

    close($file);
    $/ = "\n"; # reset to normal

    # file version, timestamp, timestamp, dir list, file header line
    return [ 2, $hdr_timestamp_sec, $hdr_timestamp_nsec, \@dirs,  $header_str];
}

## display

sub show_device_counts ($) {
    my $info = shift;
    my %devices;
    foreach my $dir (@{$info->[3]}) {
	my $dev = $dir->{'dev'};
	$devices{$dev}++;
    }

    my $devstr;
    foreach $dev (sort {$a <=> $b} keys %devices) {
	$devstr = sprintf ("0x%04x", $dev);
	if ( $dev > 0xffffffff or $dev < 0 or hex($devstr) != $dev ) {
	  # sprintf "%x" will not return a useful value for device ids
	  # that are negative or which overflow the integer size on this
	  # instance of Perl, so we convert the hex string back to a
	  # number, and if it doesn't (numerically) equal the original
	  # device id value, we know the hex conversion hasn't worked.
	  #
	  # Unfortunately, since we're running in "-w" mode, Perl will
	  # also print a warning message if the hex() routine is called
	  # on anything larger than "0xffffffff", even in 64-bit Perl
	  # where such values are actually supported... so we have to
	  # avoid calling hex() at all if the device id is too large or
	  # negative.  (If it's negative, the conversion to an unsigned
	  # integer for the "%x" specifier will mean the result will
	  # always trigger hex()'s warning on a 64-bit machine.)
	  # 
	  # These situations don't seem to occur very often, so for now
	  # when they do occur, we simply print the original text value
	  # that was read from the snapshot file; it will look a bit
	  # funny next to the values that do print in hex, but that's
	  # preferable to printing values that aren't actually correct.
	  $devstr = $dev; 
	}
	printf "  Device %s occurs $devices{$dev} times.\n", $devstr;
    }
}

## check field values

# initializes the global %snapshot_field_ranges hash, based on the "-a"
# command-line option if given, otherwise based on the "archname" of
# the current system.
#
# Each value in the hash is a two-element array containing the minimum
# and maximum allowed values, respectively, for that field in the snapshot
# file.  GNU tar's allowed values for each architecture are determined
# in the incremen.c source file, where the TYPE_MIN and TYPE_MAX
# pre-processor expressions are used to determine the range that can be
# expressed by the C data type used for each field; the values in the
# array defined below should match those calculations.  (For tar v1.27
# and later, the valid ranges for a particular tar binary can easily
# be determined using the "tar --show-snapshot-field-ranges" command.)
 
sub choose_architecture ($) {
    my $opt_a = shift;

    my $arch = $opt_a ? $opt_a : $Config{'archname'};

    # These ranges apply to Linux 2.4/2.6 on iX86 systems, but are used
    # by default on unrecognized/unsupported systems, too.
    %iX86_linux_field_ranges = (
      timestamp_sec      => [ -2147483648, 2147483647 ],   # min/max of time_t
      timestamp_nsec     => [ 0, 999999999 ],              # 0 to BILLION-1
      nfs                => [ 0, 1 ],
      dev                => [ 0, 18446744073709551615 ],   # min/max of dev_t
      ino                => [ 0, 4294967295 ],             # min/max of ino_t
    );


    if ( $arch =~ m/^i[\dxX]86-linux/i ) {
	%snapshot_field_ranges = %iX86_linux_field_ranges;
	print "Checking snapshot field values using \"iX86-linux\" ranges.\n\n";
    } elsif ( $arch =~ m/^x86_64-linux/i ) {
	%snapshot_field_ranges = (
	  timestamp_sec      => [ -9223372036854775808, 9223372036854775807 ],
	  timestamp_nsec     => [ 0, 999999999 ],
	  nfs                => [ 0, 1 ],
	  dev                => [ 0, 18446744073709551615 ],
	  ino                => [ 0, 18446744073709551615 ],
	);
	print "Checking snapshot field values using \"x86_64-linux\" ranges.\n\n";
    } elsif ( $arch =~ m/^IA64.ARCHREV_0/i ) {
	# HP/UX running on Itanium/ia64 architecture
	%snapshot_field_ranges = (
	  timestamp_sec      => [ -2147483648, 2147483647 ],
	  timestamp_nsec     => [ 0, 999999999 ],
	  nfs                => [ 0, 1 ],
	  dev                => [ -2147483648, 2147483647 ],
	  ino                => [ 0, 4294967295 ],
	);
	print "Checking snapshot field values using \"IA64.ARCHREV_0\" (HP/UX) ranges.\n\n";
    } else {
	%snapshot_field_ranges = %iX86_linux_field_ranges;
	print "Unrecognized architecture \"$arch\"; defaulting to \"iX86-linux\".\n";
	print "(Use -a option to override.)\n" unless $opt_a;
	print "\n";
    } 

    if ( ref(1) ne "" ) {
	print "(\"bignum\" mode is in effect; skipping 64-bit-integer check.)\n\n"
    } else {
	# find the largest max value in the current set of ranges
	my $maxmax = 0;
	for $v (values %snapshot_field_ranges ) {
	  $maxmax = $v->[1] if ($v->[1] > $maxmax);
	}
       
	# "~0" translates into a platform-native integer with all bits turned
	# on -- that is, the largest value that can be represented as
	# an integer.  We print a warning if our $maxmax value is greater 
	# than that largest integer, since in that case Perl will switch
	# to using floats for those large max values.  The wording of
	# the message assumes that the only way this situation can exist
	# is that the platform uses 32-bit integers but some of the
	# snapshot-file fields have 64-bit values.
	if ( ~0 < $maxmax ) {
	    print <<EOF
Note: this version of Perl uses 32-bit integers, which means that it
  will switch to using floating-point numbers when checking the ranges
  for 64-bit snapshot-file fields.  This normally will work fine, but
  might fail to detect cases where the value in the input field value is
  only slightly out of range.  (For example, a "9223372036854775808"
  might not be recognized as being larger than  9223372036854775807.)
  If you suspect you are experiencing this problem, you can try running
  the program using the "-Mbignum" option, as in
    \$ perl $0 -Mbignum -c [FILES]
  (but doing so will make the program run *much* slower).

EOF
	}
    }
    

}

# returns a warning message if $field_value isn't a valid string 
# representation of an integer, or if the resulting integer is out of range
# defined by the two-element array retrieved using up the $field_name key in
# the global %snapshot_field_ranges hash.
sub validate_integer_field ($$) {
    my $field_value = shift;
    my $field_name = shift;

    my ($min, $max) = @{$snapshot_field_ranges{$field_name}};

    my $msg = "";

    if ( not $field_value =~ /^-?\d+$/ ) {
	$msg = "      $field_name value contains invalid characters: \"$field_value\"\n";
    } else {
	if ( $field_value < $min ) {
	    $msg = "      $field_name value too low: \"$field_value\" < $min \n";
	} elsif ( $field_value > $max ) {
	    $msg = "      $field_name value too high: \"$field_value\" > $max \n";
	}
    }
    return $msg;
}


# This routine loops through each directory entry in the $info data
# structure and prints a warning message if tar would abort with an
# "Unexpected field value in snapshot file", "Numerical result out of
# range", or "Invalid argument" error upon reading this snapshot file.
#
# (Note that the "Unexpected field value in snapshot file" error message
# was introduced along with the change to snapshot file format "2",
# starting with tar v1.16 [or, more precisely, v1.15.91], while the
# other two were introduced in v1.27.)
#
# The checks here are intended to match those found in the incremen.c
# source file.  See the choose_architecture() function (above) for more 
# information on how to configure the range of values considered valid 
# by this script.
#
# (Note: the checks here are taken from the code that processes
# version 2 snapshot files, but to keep things simple we apply those
# same checks to files having earlier versions -- but only for
# the fields that actually exist in those input files.)

sub check_field_values ($) {
    my $info = shift;

    my $msg;
    my $error_found = 0;

    print "  Checking field values in snapshot file...\n";

    $snapver = $info->[0];

    $msg = "";
    $msg .= validate_integer_field($info->[1], 'timestamp_sec');
    if ($snapver >= 1) {
      $msg .= validate_integer_field($info->[2], 'timestamp_nsec');
    }
    if ( $msg ne "" ) {
	$error_found = 1;
	print "\n    snapshot file header:\n";
	print $msg;
    }


    foreach my $dir (@{$info->[3]}) {

	$msg = "";

	$msg .= validate_integer_field($dir->{'nfs'}, 'nfs');
	if ($snapver >= 1) {
	  $msg .= validate_integer_field($dir->{'timestamp_sec'}, 'timestamp_sec');
	  $msg .= validate_integer_field($dir->{'timestamp_nsec'}, 'timestamp_nsec');
	}
	$msg .= validate_integer_field($dir->{'dev'}, 'dev');
	$msg .= validate_integer_field($dir->{'ino'}, 'ino');

	if ( $msg ne "" ) {
	  $error_found = 1;
	  print "\n    directory: $dir->{'name'}\n";
	  print $msg;
	}
    }

    print "\n  Snapshot field value check complete" ,
	   $error_found ?  "" : ", no errors found" ,
	   ".\n";
}

## editing

sub replace_device_number ($@) {
    my $info = shift(@_);
    my @repl = @_;

    my $count = 0;

    foreach my $dir (@{$info->[3]}) {
	foreach $x (@repl) {
	    if ($dir->{'dev'} eq $$x[0]) {
		$dir->{'dev'} = $$x[1];
		$count++;
		last;
	    }
	}
    }
    print "  Updated $count records.\n"
}

## writing

sub write_incr_db ($$) {
    my $info = shift;
    my $filename = shift;
    my $file_version = $$info[0];

    open($file, ">$filename") || die "Could not open '$filename' for writing";

    if ($file_version == 0) {
	write_incr_db_0($info, $file);
    } elsif ($file_version == 1) {
	write_incr_db_1($info, $file);
    } elsif ($file_version == 2) {
	write_incr_db_2($info, $file);
    } else {
	die "Unknown file version $file_version.";
    }

    close($file);
}

sub write_incr_db_0 ($$) {
    my $info = shift;
    my $file = shift;

    my $timestamp_sec = $info->[1];
    print $file "$timestamp_sec\n";

    foreach my $dir (@{$info->[3]}) {
	if ($dir->{'nfs'}) {
	  print $file '+'
	}
	print $file "$dir->{'dev'} ";
	print $file "$dir->{'ino'} ";
	print $file "$dir->{'name'}\n";
    }
}


sub write_incr_db_1 ($$) {
    my $info = shift;
    my $file = shift;

    print $file $info->[4];

    my $timestamp_sec = $info->[1];
    my $timestamp_nsec = $info->[2];
    print $file "$timestamp_sec $timestamp_nsec\n";

    foreach my $dir (@{$info->[3]}) {
	if ($dir->{'nfs'}) {
	  print $file '+'
	}
	print $file "$dir->{'timestamp_sec'} ";
	print $file "$dir->{'timestamp_nsec'} ";
	print $file "$dir->{'dev'} ";
	print $file "$dir->{'ino'} ";
	print $file "$dir->{'name'}\n";
    }
}


sub write_incr_db_2 ($$) {
    my $info = shift;
    my $file = shift;

    print $file $info->[4];

    my $timestamp_sec = $info->[1];
    my $timestamp_nsec = $info->[2];
    print $file $timestamp_sec . "\0";
    print $file $timestamp_nsec . "\0";

    foreach my $dir (@{$info->[3]}) {
	print $file $dir->{'nfs'} . "\0";
	print $file $dir->{'timestamp_sec'} . "\0";
	print $file $dir->{'timestamp_nsec'} . "\0";
	print $file $dir->{'dev'} . "\0";
	print $file $dir->{'ino'} . "\0";
	print $file $dir->{'name'} . "\0";
	foreach my $dirent (@{$dir->{'dirents'}}) {
	    print $file $dirent . "\0";
	}
	print $file "\0";
    }
}

## main

sub main {
    our ($opt_b, $opt_r, $opt_h, $opt_c, $opt_a);
    getopts('br:hca:');
    HELP_MESSAGE() if ($opt_h || $#ARGV == -1 || ($opt_b && !$opt_r) ||
		       ($opt_a && !$opt_c) || ($opt_r && $opt_c) );

    my @repl;
    if ($opt_r) {
	foreach my $spec (split(/,/, $opt_r)) {
	    ($spec =~ /^([^-]+)-([^-]+)/) || die "Invalid replacement specification '$opt_r'";
	    push @repl, [interpret_dev($1), interpret_dev($2)];
	}
    }

    choose_architecture($opt_a) if ($opt_c);

    foreach my $snapfile (@ARGV) {
	my $info = read_incr_db($snapfile);
	if ($opt_r) {
	    if ($opt_b) {
		rename($snapfile, $snapfile . "~") || die "Could not rename '$snapfile' to backup";
	    }

	    replace_device_number($info, @repl);
	    write_incr_db($info, $snapfile);
	} elsif ($opt_c) {
	    check_field_values($info);
	} else {
	    show_device_counts($info);
	}
    }
}

sub HELP_MESSAGE {
    print <<EOF;

Usage:
  tar-snapshot-edit SNAPFILE [SNAPFILE [...]]
  tar-snapshot-edit -r 'DEV1-DEV2[,DEV3-DEV4...]' [-b] SNAPFILE [SNAPFILE [...]]
  tar-snapshot-edit -c [-aARCH] SNAPFILE [SNAPFILE [...]]

     With no options specified: print a summary of the 'device' values
     found in each SNAPFILE.

     With -r: replace occurrences of DEV1 with DEV2 in each SNAPFILE.
     DEV1 and DEV2 may be specified in hex (e.g., 0xfe01), decimal (e.g.,
     65025), or MAJ:MIN (e.g., 254:1).  To replace multiple occurrences,
     separate them with commas.  If -b is also specified, backup files
     (ending with '~') will be created.

     With -c: Check the field values in each SNAPFILE and print warning
     messages if any invalid values are found.  (An invalid value is one
     that would cause \"tar\" to abort with an error message such as
       Unexpected field value in snapshot file
       Numerical result out of range
     or 
       Invalid argument
     as it processed the snapshot file.)

     Normally the program automatically chooses the valid ranges for 
     the fields based on the current system's architecture, but the 
     -a option can be used to override the selection, e.g. in order 
     to validate a snapshot file generated on a some other system.
     (Currently only three architectures are supported, "iX86-linux",
     "x86_64-linux", and "IA64.ARCHREV_0" [HP/UX running on Itanium/ia64], 
     and if the current system isn't recognized, then the iX86-linux
     values are used by default.)

EOF
    exit 1;
}

sub interpret_dev ($) {
    my $dev = shift;

    if ($dev =~ /^([0-9]+):([0-9]+)$/) {
	return $1 * 256 + $2;
    } elsif ($dev =~ /^0x[0-9a-fA-F]+$/) {
	return oct $dev;
    } elsif ($dev =~ /^[0-9]+$/) {
	return $dev+0;
    } else {
	die "Invalid device specification '$dev'";
    }
}

main